The rifle is fitted with a 37-1/2" long 1-1/8" straight octagon .62 caliber barrel cut rifled and hand lapped barrel, by NMLRA record holder James Goodoien. Now retired, James Goodoien is a serious student of the best rifle barrel makers of yesterday and today, Jim has mastered their techniques. After retiring as partner and manager of a large specialty printing company, Jim has focused his efforts on creating the best rifle barrels for his fellow shooters. His hobby is shooting, and his passion is perfection. He has outfitted his shop with huge twin gun drills, rifling machines of his own design, massive milling machines, and special lathes.
Starting with selected round steel stock, Jim drills holes that are nearly perfectly straight. Bores are reamed to a mirror finish, using special reamers made in his shop. Rifling grooves are slowly cut in many passes, until correct depth. Outside flats are milled octagon to insure that the bore is perfectly concentric. Breech ends are threaded for a plug, and muzzles are crowned. But most important, a lead slug is cast in the barrel, affixed to a lapping rod, and the barrel is hand lapped until the bore is perfect. No "break-in" period is required. Goodoien barrels are ready to produce best accuracy from the first shot.
The bore is cut rifled with seven lands and grooves with a slow twist for shooting a patched round ball and bright and well maintained. Mr. Goodoien offered these as .60 caliber barrels when new. Other barrel makers might call this a .62 caliber barrel, since it shoots the .595" or .600" round ball, recommended for .62 caliber.
The barrel is finished to a smooth brown and shows a few bright spots from normal handling and cleaning. The front sight is a modern style browned blade dovetailed 2" behind the muzzle, and the rear sight is a classic semi-buckhorn rear sight dovetailed 11-1/2" ahead of the breech. The quarter flat is stamped P SHEETS 32
Correctly trimmed entirely in iron, this rifle has a modestly curved early buttplate, to minimize the recoil from the .62 caliber bore. The maple stock displays bands of figure over the length of the stock. The stock has nice figure from the toe up through the forearm on the lower half of the stock. The inletting on the stock is fair with visible gaps along the lower edge of the lock mortise. The Hawken "slanted" hooked breech allows easy cleaning. To dismount the barrel remove the three barrel wedge keys, and the barrel can be lifted from the stock for cleaning. The keys pass through the stock with browned oval escutcheons to protect the wood. The wedge keys are well fitted and we recommend a small hard wood or brass drift to apply pressure to them. The wooden ramrod is fitted with a brass tips with 8-32 threads for loading and cleaning accessories.
Notice the long tang, with two tang bolts that anchor the tang to the long trigger plate, reinforcing the wrist, a classic feature of rugged Hawken rifles. The brown finish of the barrel, lock, and iron show a small amount of wear from use. The bottom view shows the classic Hawken toeplate that protects this delicate area when loading. The long trigger bar can be seen that accepts the two tang bolts from above, sandwiching the wrist and adding strength. Our back view shows the early square cheek piece and the single lock bolt that is surrounded by a late period Hawken sideplate escutcheon, a classic Hawken feature.
Ron Long, of Denver, recreated this T. Gibbons Hawken percussion lock, for the now defunct Green River Rifle Works. Skillfully assembled and tuned by R. E. Davis, this is the correct Hawken lock for this late fur trade era percussion rifle. Polished inside, the well tempered parts include a strong mainspring, stirrup link, and a fly detent to allow set triggers. The lock is polished bright and hand engraved with some decorative scroll work. The double set triggers by L&R Lock Company are made with very long trigger bar. We note the lock can only be fired from the set position due to the way it is tuned. You may set the triggers either before or after cocking the lock. The breech is fitted with a steel 1/4-28 nipple for No. 11 percussion caps.
This fullstock Hawken rifle has a bright well maintained bore that is ready to shoot. It will be perfect for your next Rendezvous, or X-stick match. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.
Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.
Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.