This Pedersoli Frontier rifle is stocked in walnut and trimmed in brass furniture. This rifle has only a few marks on the frizzen face from sparking and the stock appears to be as-new. This sleek flint longrifle is .54 caliber, with 39" browned octagon barrel, iron front sight, semi-buckhorn rear sight, and color case hardened lock. With a trigger reach of 14-1/4” and an overall weight of 7.8 pounds, this rifle has been built with today’s larger shooter, someone over 5’10”, in mind.
The 39" octagon barrel is marked with various Pedersoli markings including the caliber, .54, on the left oblique flat. The barrel is finished a dark brown. The .32 caliber bore is bright. The front sight is a steel blade, with integral steel base, located 2” behind the muzzle; the rear sight is a classic semi-buckhorn rear sight, with square notch, sighted to match the front sight and is located 11-1/2” forward of the breech. This is a sight set-up that is preferred by older shooters with corrective lenses, since the sight picture appears more natural.
Stocked in walnut that has been stained a medium brown. Trimmed in brass, the polished furniture is bright. The rifle is not decorated or overly fancy; no entry pipe is fitted, and no pins or lugs are needed, since rod pipe mounting screws also attach the forend to the barrel. A molding along the forend ends with a relief at the muzzle, to allow your fingers to easily grip and remove the rod. No decorative muzzle cap or toeplate is used on Frontier rifles. Our back view shows the Kentucky rifle style cheek piece, and side panel. No sideplate, toeplate, muzzle cap, or ramrod entry pipe is fitted.
The large rifle size flint lock is color case hardened in mottled colors. The lock sparks well, and the frizzen face shows only a few marks on it. We recommend a 7/8" by 1" flint in the Pedersoli Frontier locks. Double lever double set triggers are correctly tuned to fire set or unset. You may cock the lock, or set the triggers, in any sequence. Thus, this rifle will serve you well when hunting big game during very cold weather. A tiny adjustment screw, between the two triggers, controls trigger release. Turn it inboard, until the set feature is disabled, for use during very cold weather. Don't risk an accidental discharge. Numb fingers cannot feel the very light touch of this double set trigger, when set. When disabled, the rifle has a normal trigger release, probably about 4 pounds or a bit more, ideal for hunting. When enabled, you can set a very light trigger release, ideal for match shooting, or hunting small game in moderate weather.
Ignition is aided by the stainless steel vent liner, perfectly centered and correctly positioned well above the pan, to serve as a window on the center of the priming flash. This vent is slotted to allow easy removal. We stock the spare vent, and we can supply a 8-1.25mm threaded flush nipple, #FLUSH-EMI and tubing kit, to allow hot water flush cleaning this rifle without spilling water on the stock.
This rilfe has the following accessories:
The 39" octagon barrel is marked with various Pedersoli markings including the caliber, .54, on the left oblique flat. The barrel is finished a dark brown. The .32 caliber bore is bright. The front sight is a steel blade, with integral steel base, located 2” behind the muzzle; the rear sight is a classic semi-buckhorn rear sight, with square notch, sighted to match the front sight and is located 11-1/2” forward of the breech. This is a sight set-up that is preferred by older shooters with corrective lenses, since the sight picture appears more natural.
Stocked in walnut that has been stained a medium brown. Trimmed in brass, the polished furniture is bright. The rifle is not decorated or overly fancy; no entry pipe is fitted, and no pins or lugs are needed, since rod pipe mounting screws also attach the forend to the barrel. A molding along the forend ends with a relief at the muzzle, to allow your fingers to easily grip and remove the rod. No decorative muzzle cap or toeplate is used on Frontier rifles. Our back view shows the Kentucky rifle style cheek piece, and side panel. No sideplate, toeplate, muzzle cap, or ramrod entry pipe is fitted.
The large rifle size flint lock is color case hardened in mottled colors. The lock sparks well, and the frizzen face shows only a few marks on it. We recommend a 7/8" by 1" flint in the Pedersoli Frontier locks. Double lever double set triggers are correctly tuned to fire set or unset. You may cock the lock, or set the triggers, in any sequence. Thus, this rifle will serve you well when hunting big game during very cold weather. A tiny adjustment screw, between the two triggers, controls trigger release. Turn it inboard, until the set feature is disabled, for use during very cold weather. Don't risk an accidental discharge. Numb fingers cannot feel the very light touch of this double set trigger, when set. When disabled, the rifle has a normal trigger release, probably about 4 pounds or a bit more, ideal for hunting. When enabled, you can set a very light trigger release, ideal for match shooting, or hunting small game in moderate weather.
Ignition is aided by the stainless steel vent liner, perfectly centered and correctly positioned well above the pan, to serve as a window on the center of the priming flash. This vent is slotted to allow easy removal. We stock the spare vent, and we can supply a 8-1.25mm threaded flush nipple, #FLUSH-EMI and tubing kit, to allow hot water flush cleaning this rifle without spilling water on the stock.
This rilfe has the following accessories:
- A hickory bench ramrod (not shown) with 10-32 threaded brass tip
- Canvas bag with shoulder strap, This a modern style bag and has zippers on the inside
- Brush
- Boremop
- Cleaning jag
- Ball puller
- Fouling scraper
- Powder measure
- Free flow priming flask
- Short starter
- Flint wallet
- Cleaning patches
- Two thickness of shooting patches
- Patch knife
- Round balls
- Ball bag
- Powder horn
- Brass funnel
Related Products Shown Below
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
Bore brush, bronze, for .54 caliber, 10-32 thread
French amber gun flint, 7/8 x 1" for Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers locks. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 10-32 thread
Powder measure, brass, adjustable 0 to 120 grains, with spout
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Pick & Pan Brush,
with brass chain, button clasp,
and black bristle brush,
for flint musket, rifle, or fowler
Ramrod,
7/16" hickory, 47" long, brass tip, 10-32 thread
Made in the U.S.A.
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Timothy Pickering's Tool,
medium size, for flint rifles & fowling guns,
the first U. S. issue gun tool,
designed by our first U. S. Quartermaster
Primitive Rifleman's Turn Screw, hand forged tempered steel screwdriver, to fit in a longrifle patchbox
Patch puller worm, double tine, steel, 10-32 thread, made in the U.S.A.
FLINT-AMBER-7
French amber gun flint, 7/8 x 1" for Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers locks. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
OX-CLEAN-58C
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
PICK-BRUSH-H
Pick & Pan Brush,
with brass chain, button clasp,
and black bristle brush,
for flint musket, rifle, or fowler
TOOL-PICK-M
Timothy Pickering's Tool,
medium size, for flint rifles & fowling guns,
the first U. S. issue gun tool,
designed by our first U. S. Quartermaster
TOOL-TURN-U
Primitive Rifleman's Turn Screw, hand forged tempered steel screwdriver, to fit in a longrifle patchbox