Stocked in walnut, this Kentucky-style flint rifle is trimmed in brass furniture with a tiger stripe finish. This rifle was assembled from a kit by Davide Pedersoli of Italy. Assembled from a kit, there is extra wood throughout, with the wood standing proud of the metal is most areas. This rifle is used with a bright, well-maintained bore that is ready to shoot. Trigger reach is 13-1/4" to fit today's average-sized shooter. Weight is 8.1 pounds.
The 35-1/2" long, 7/8" octagon barrel has a silvery-brown patina finish. The .50 caliber bore is bright and has been well maintained. The barrel has a tall blued iron blade front sight dovetailed 2" behind the muzzle and a flat top rear sight is dovetailed 7-3/4" ahead of the breech. The left oblique flat is stamped "Black Powder Only—Italy/24 Pedersoli—cal. 50" along with various proof marks and the serial number near the breech.
Stocked in walnut, the stock has a tiger stripe finish. Using aquafortis, the dark stripes resemble the faux striping found on antique H.E. Leman trade rifles. Assembled from a kit, there is extra wood throughout the stock and the wood stands proud of the metal is most areas. The router lines from the factory around the lock panels were not sanded and blended into the stock. The buttstock has a slender brass buttplate in late 18th- to early 19th-century style that is secured with Phillip's head screws. All of the brass on this rifle has aged to a mellow patina from use. The brass patchbox is also mounted with Phillip's screws. The door opens to reveal a deep cavity for storing extra flints and shooting supplies. The brass toe plate is 4" long and is retained by two Phillip's head screws. The trigger guard is mounted with two slotted blued steel screws. The brass ramrod pipes are round with raised rings on the ends. The ramrod is fitted with a brass tip with 10-32 threads for loading and cleaning accessories. The ramrod has the same tiger stripe finish as the stock. A brass muzzle cap protects the end grain of the forearm. The stock has no cheek, and the lock is retained by two lock bolts surrounded by a simple brass sideplate inlet flush with the stock.
The flintlock has the same patina finish as the barrel. The frizzen on the lock shows typical wear from firing. The lock sparks well when combined with a 5/8 by 3/4" knapped flint, #FLINT-AMBER-5. Ignition is aided by the stainless steel vent liner, perfectly centered and correctly positioned well above the pan, to serve as a window on the center of the priming flash. We stock the spare #THL-DP vent liner for Davide Pedersoli rifles and pistols, should you ever need a replacement. The single trigger requires a firm pull to release the lock.
This flint long rifle is ready for a day at the range, the bore is bright and has been well maintained. The tiger stripe finish gives this rifle a unique look that pays homage to the old H.E. Leman trade rifles. Order it for a ten-day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for a same-day refund. Postage is your only risk when you order any one-of-a-kind gun from Track, whether new, used, or antique.
The 35-1/2" long, 7/8" octagon barrel has a silvery-brown patina finish. The .50 caliber bore is bright and has been well maintained. The barrel has a tall blued iron blade front sight dovetailed 2" behind the muzzle and a flat top rear sight is dovetailed 7-3/4" ahead of the breech. The left oblique flat is stamped "Black Powder Only—Italy/24 Pedersoli—cal. 50" along with various proof marks and the serial number near the breech.
Stocked in walnut, the stock has a tiger stripe finish. Using aquafortis, the dark stripes resemble the faux striping found on antique H.E. Leman trade rifles. Assembled from a kit, there is extra wood throughout the stock and the wood stands proud of the metal is most areas. The router lines from the factory around the lock panels were not sanded and blended into the stock. The buttstock has a slender brass buttplate in late 18th- to early 19th-century style that is secured with Phillip's head screws. All of the brass on this rifle has aged to a mellow patina from use. The brass patchbox is also mounted with Phillip's screws. The door opens to reveal a deep cavity for storing extra flints and shooting supplies. The brass toe plate is 4" long and is retained by two Phillip's head screws. The trigger guard is mounted with two slotted blued steel screws. The brass ramrod pipes are round with raised rings on the ends. The ramrod is fitted with a brass tip with 10-32 threads for loading and cleaning accessories. The ramrod has the same tiger stripe finish as the stock. A brass muzzle cap protects the end grain of the forearm. The stock has no cheek, and the lock is retained by two lock bolts surrounded by a simple brass sideplate inlet flush with the stock.
The flintlock has the same patina finish as the barrel. The frizzen on the lock shows typical wear from firing. The lock sparks well when combined with a 5/8 by 3/4" knapped flint, #FLINT-AMBER-5. Ignition is aided by the stainless steel vent liner, perfectly centered and correctly positioned well above the pan, to serve as a window on the center of the priming flash. We stock the spare #THL-DP vent liner for Davide Pedersoli rifles and pistols, should you ever need a replacement. The single trigger requires a firm pull to release the lock.
This flint long rifle is ready for a day at the range, the bore is bright and has been well maintained. The tiger stripe finish gives this rifle a unique look that pays homage to the old H.E. Leman trade rifles. Order it for a ten-day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for a same-day refund. Postage is your only risk when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.
Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.
Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.
BALL-490
.490" round balls, pure lead, Hornady, per 100
BORE-CLEAN
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
BP-50-10
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
BRUSH-50-10
Bore brush, bronze, for .50 caliber, 10-32 thread
FLASK-PP-3
Flint priming flask, throws about 3 grains, brass
FLINT-AMBER-5
French amber gun flint, 5/8 x 3/4" for small Siler, L&R Bailes, CVA, T/C, Pedersoli. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
FS-50-10
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
HORN-A-L
Powder Horn,
large, 11 to 14",
with antique patina finish
HORN-A-S
Priming Horn,
small, 4 to 5",
with antique patina finish
JS-50-6-10
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
MAS-120
Powder measure, brass, adjustable 0 to 120 grains, with spout
OX-15-50-W
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, wonder-lube
OX-18-50-W
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, premium-lube
OX-CLEAN-58C
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
PICK-BRUSH-H
Pick & Pan Brush,
with brass chain, button clasp,
and black bristle brush,
for flint musket, rifle, or fowler
PICK-VENT-2
Forged steel vent pick,
2-1/2" long, for rifle
RAMROD-6-10-B
Ramrod,
3/8" hickory, 47" long, brass tip, 10-32 thread
Made in the U.S.A.
ST-7
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
TOOL-PICK-L
Timothy Pickering's Tool,
for flint muskets,
the first U. S. issue gun tool,
designed by our first U. S. Quartermaster
TOOL-PICK-M
Timothy Pickering's Tool,
medium size, for flint rifles & fowling guns,
the first U. S. issue gun tool,
designed by our first U. S. Quartermaster
TOOL-TURN-U
Primitive Rifleman's Turn Screw, hand forged tempered steel screwdriver, to fit in a longrifle patchbox
WORM-T2-10
Patch puller worm, double tine, steel, 10-32 thread, made in the U.S.A.
