
Best used in sequence, to clean up a 1/4x28 thread. Install one of our matching oversize nipples. Never use a standard nipple in an oversize hole! Never use these taps to thread a new hole. Stop when threads are fully restored. Don't enlarge nipple seats unnecessarily.
Sturdy hardened steel. Use a tap handle. Properly used, these should last a lifetime. They can be carelessly damaged, chipped, broken, or dulled. Not warranted against failure. Repairs are best performed by skilled gunsmiths, experienced machinists, or serious hobbyists.
Sturdy hardened steel. Use a tap handle. Properly used, these should last a lifetime. They can be carelessly damaged, chipped, broken, or dulled. Not warranted against failure. Repairs are best performed by skilled gunsmiths, experienced machinists, or serious hobbyists.
Oversize threaded nipple, .275-28,
1/4-28 with .025" oversize thread,
for CCI #11 cap, hardened steel,
square shank, ideal for restoration
- Cone length: 0.440"
- Thread journal length: 0.195"
- Overall length: 0.635"
- Diameter of base: 0.307"
Oversize threaded nipple, .275-28,
1/4-28 with .025" oversize thread,
for CCI #11 cap, stainless steel
- Cone length: 0.440"
- Thread journal length: 0.195"
- Overall length: 0.635"
- Diameter of base: 0.307"
Oversize Reforming Thread Taps,
to repair worn or damaged 1/4-28 threads, set of three
Oversize Reforming Thread Taps,
to repair worn or damaged 1/4-28 threads, set of five
All sizes are nominal. Please verify with description for more information.
-
Reforming Taps for Repair1/4-28 + 0.025" ( 0.275-28 )
-
Tap StyleReforming Tap
ROS-25-I
Oversize threaded nipple, .275-28,
1/4-28 with .025" oversize thread,
for CCI #11 cap, hardened steel,
square shank, ideal for restoration
Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
ROS-25-S
Oversize threaded nipple, .275-28,
1/4-28 with .025" oversize thread,
for CCI #11 cap, stainless steel
Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
TOOL-RETAP-SET-3
Oversize Reforming Thread Taps,
to repair worn or damaged 1/4-28 threads, set of three
TOOL-RETAP-SET-5
Oversize Reforming Thread Taps,
to repair worn or damaged 1/4-28 threads, set of five
page_389.pdf
Last updated: 4/25/2012 (143 KB)