L&R's RPL-02-F Flint Lock to upgrade the CVA or Traditions Hawken Rifle , right hand only, made in the USA, by L&R Lock Company This flint lock will replace the large flint lock on the CVA or Traditions Hawken Rifle, from Spain. Overall length 4.98” x 0.98” width. Right hand only. NOTE: this lock wll NOT fit the Traditions Woodsman or Traditions St. Louis Hawken. See the No. 7 RPL lock for those rifles. This lock has thicker stronger internal springs and parts than the Con       LOCK-LR-02-F . . . $270.00

L&R's RPL-03-F Flint Lock to upgrade Thompson Center's Hawken or Renegade Rifle , right hand only, made in the USA, by L&R Lock Company This new flint lock will replace the flint lock on the Thompson Center, Hawes brand imported Hawken, or early Lyman Plains rifle. We recommend our 3/4" x 7/8" knapped English flints, #FLINT-ENG-6 for use with this lock. Overall length is 5" x 1" width. Bridle is threaded 8-32 for factory T/C lock bolt. Right hand only. This lock has thicker stronge       LOCK-LR-03-F . . . $270.00

L&R's RPL-07-F Flint Lock to upgrade the Traditions Hawken Woodsman or Buckskinner Rifle , right hand only, made in the USA, by L&R Lock Company This flint lock will replace the large flint lock on the Hawken Woodsman or Buckskinner Rifle, from Spain. Note the curve on the lower edge of the plate vs. the standard Hawken lock. Overall length 5-1/32” x 1-1/32” width. Right hand only. This lock has thicker stronger internal springs and parts than the Traditions lock. It requires deepening the       LOCK-LR-07-F . . . $270.00

Siler Small Right Hand Flint Lock Kit , unassembled, requires drilling and tapping Siler small right Flint Lock Kit If you are familiar with the internal workings of flint locks, you can assemble our Siler kit, and tune it to be a fine sparking lock. All holes to be drilled in the plate are spotted. A drill guide is included to aid you in accurately locating holes. Springs are hardened and tempered. Kits come with instructions       LOCK-SS-FK-RH . . . $220.00

Colonial Pistol , .54 caliber 9" Getz swamped barrel, small Siler flint lock, maple, brass, marked W.K. This Colonial or Kentucky flintlock pistol has a medium size grip for a man's hand, angled to point instinctively. Assembled from pistol parts by the late William Kennedy. The barrel has Mr. Kennedy's WK touch mark at the breech, but it does not appear to be fully assembled by him. The lock still retains the original matte gray finish and was never       AAW-427 . . . $1,349.00

The Art of Flint Knapping , by D.C. Waldorf The author describes and illustrates the simple techniques required to fashion simple or fancy stone arrow points and tools. A section on gun flints is included. The tools required are very simple and easily made, and results are fascinating. You can be making fine arrow points after only a few hours of practice. Newest edition, 8-1/2 x 11" soft bo       BOOK-AOF . . . $16.99

Flint Fowling Gun Buttplate , wax cast brass Overall length 5", width 2", comb 5-7/8" This wide early buttplate fits our pre-carved flint fowling gun stock, and is ideal for use on flint fowling guns, fusils, muskets, or early flint rifles. The pointed finial design works well on a quasi-military arm, Officer's fusil, Committee of Safety musket, Sergeant's musket, or Chief's Trade Gun. Reshape the comb for use on a longrifle. Availa       BP-FOWL-20-B . . . $52.00

Flint Fowling Gun Buttplate , wax cast steel Overall length 5", width 2", comb 5-7/8" This wide early buttplate fits our pre-carved flint fowling gun stock, and is ideal for use on flint fowling guns, fusils, muskets, or early flint rifles. The pointed finial design works well on a quasi-military arm, Officer's fusil, Committee of Safety musket, Sergeant's musket, or Chief's Trade Gun. Reshape the comb for use on a longrifle. Availa       BP-FOWL-20-I . . . $35.00

lock, flint , U. S. Model 1803 Harper's Ferry rifle Correctly shaped and marked, copied from an original, this flint lock is precision pre-inlet into our pre-shaped U. S. Model 1803 Rifle stock. The plate is marked with an American Eagle, HARPER'S FERRY and dated 1803 . Neatly assembled, tempered, and tuned by R. E. Davis, this well made lock features the popular internal parts, for long service and       LOCK-1803 . . . $225.00

L&R's RPL-04-F Flint Lock to upgrade Dixie Gun Works Tennessee Rifle , right hand only, made in the USA, by L&R Lock Company This new flint lock will replace the Dixie Tennessee Mountain rifle fint lock. A new lock bolt is included. This flint longrifle is nearly always stocked in cherry, trimmed in iron, marked "JAPAN" on the barrel, made by Miroku, Japan, for Dixie Gun Works. It nearly always has double set triggers, and often has a grease hole bored in the buttstock i       LOCK-LR-04-F . . . $270.00

L&R's RPL-05-F Flint Lock to upgrade Lyman Great Plains, Cabela's, InvestArm Hawken or Gemmer Hawken Rifles , right hand, made in the USA, by L&R Lock Company This flint lock will upgrade and replace the lock on the Lyman Great Plains Rifle, InvestArm Hawken, or Cabela's Hawken. We recommend our 3/4" x 7/8" knapped English flints, #FLINT-ENG-6, for this lock. Overall length 5-1/16" x 1" width. Right hand only. This lock has thicker stronger internal springs and parts than the Lyman Great Plains Rifle, In       LOCK-LR-05-F . . . $270.00

L&R's RPL-05-F Left Hand Flint Lock to upgrade Left Hand Lyman Great Plains, Cabela's, or InvestArm Hawken Rifles , left hand, made in the USA, by L&R Lock Company This flint lock will upgrade and replace the lock on the left hand Lyman Great Plains Rifle, InvestArm Hawken, or Cabela's Hawken. We recommend our 3/4" x 7/8" knapped English flints, #FLINT-ENG-6, for this lock. Overall length 5-1/16" x 15/16" width. The lock inludes a new shorter 8-32 threaded lock bolt. This lock has thicker stronger internal s       LOCK-LR-05-F-LH . . . $270.00

Siler Flint Lock Kit , for gunmakers Gunmakers flintlock kit is a Siler flint kit, with an oversize plate.If you are familiar with the internal workings of flintlocks, our Siler kit can be assembled into a fine lock. All holes to be drilled in the plate are spotted. A drill guide is included to aid you in accurately locating holes. Springs are hardened and tempered. Kits come with ins       LOCK-OS-FK-RH . . . $220.00

Pick & Pan Brush , with brass chain, button clasp, and black bristle brush, for flint musket, rifle, or fowler No re-enactor or flint lock shooter should be without a proper pick & brush set. These handy tools are used for clearing the pan and touch hole of your firearm between shots, This "whisk and pick" is modeled after several original examples, and features a 3" hand forged vent pick, with decorative twists and curled head. The 2-1/4" brush has a turne       PICK-BRUSH-H . . . $15.99

Flint Hawken 15/16" slant faced breech & tang, 5/8-18 thread, by L&R Pre-fitted plug and tang mating surfaces are machined and finished by L&R, for a snap fit. This well made slant faced flint plug and tang is threaded 5/8-18 with .690" thread journal length and .500" thread engagement for strength. The powder chamber is drilled .375" diameter, over one inch deep, to the center of the octagon extension. The tang swe       PLUG-LRF-15-5 . . . $110.00

Flint Hawken 1" slant faced breech & tang, 3/4-16 thread This well made slant faced flint plug and tang is threaded 3/4-16 with .625" thread journal engagement for strength. The powder chamber is drilled .375" diameter, over one inch deep, to the center of the octagon extension. The tang sweeps up to the wood, at both rear corners. Ideally suited for use with L&R's #LOCK-LR-900 right flintlock, or #LOCK-       PLUG-LRF-16-3 . . . $110.00

Leather Flint Wallet , 4 ounce leather, 5" by 2-3/4" A handy way to store your flints, maintenance tools, and extra little parts. The wallet has 3 small pockets to hold extra flints, and a larger pocket for other flint lock accessories. Made from 4 oz. brown leather with a brass button closure. Folds closed to 5" x 2-3/4". Tools are not included. Leather color can vary slightly.       POUCH-TOOL . . . $16.00

Strike-a-Light fire striker, hand forged, curled ends, with flint chard Authentic and well proportioned, our fire striker fits neatly in our popular oval tinder and tobacco boxes. Striker measures about 3-3/8" long. Our low price includes a sharp American flint chard. Our special hardening process makes it spark well, throwing showers of hot sparks, when you present the sharp edge of our flint chard at the perfect angl       STRIKER-CF . . . $9.99

Early Southern Mountain Rifle , .40 caliber 46" swamped barrel, TRS flint lock, maple, brass trim, used This Early Southern Mountain longrifle is stocked in maple with limited brass trim in true "Poor Boy Fashion." This rifle represents a working man's gun, made from recycled parts, at a time when nothing went to waste on the frontier. The rifle features a .40 caliber swamped barrel that measures 46" long. The bore has been well maintained and is rea       AAV-424 . . . $2,699.00

Kentucky Pistol .50 caliber 10-1/2" tapered barrel, small Siler flint lock, curly maple, engraved brass trim, signed by R.W. Deitz This Kentucky pistol is stocked in curly maple, stained to a golden brown. The brass furniture has a hand burnished appearance with engraved accents and nicely compliments the tone of the stock. The tapered octagon barrel is finished to a dark brown, while the small Siler flintlock has a temper blue finish. This pistol is unfired and has only a few       AAW-147 . . . $2,699.00

Flint Flash Guard, two points of contact, French, fleur-de-lis, brass These brass flash guards, protect the shooter next to you from overspray vented from your flash hole. This flash guard is shaped with a long arm to provide two contact points. Reshape, or alter as needed. This protection is required at most-re-enactments, where flint shooters may stand and fire volleys shoulder-to-shoulder. .062" soft brass, it ma       FLASH-GD-2-FR-B . . . $8.99

Flint Flash Guard, two points of contact, French, fleur-de-lis, iron These brass flash guards, protect the shooter next to you from overspray vented from your flash hole. This flash guard is shaped with a long arm to provide two contact points. Reshape, or alter as needed. This protection is required at most-re-enactments, where flint shooters may stand and fire volleys shoulder-to-shoulder. .055" steel, it may be       FLASH-GD-2-FR-I . . . $8.99

Flint Flash Guard, two points of contact, British Crown, brass This brass flash guard protects the shooter next to you from overspray vented from your flash hole. This flash guard is shaped with a long arm to provide two contact points. Reshape, or alter as needed. This protection is required at most-re-enactments, where flint shooters may stand and fire volleys shoulder-to-shoulder. .062" soft brass, it may       FLASH-GD-2-GR-B . . . $8.99

Flint Flash Guard, two points of contact, British Crown, iron This iron flash guard protects the shooter next to you from overspray vented from your flash hole. This flash guard is shaped with a long arm to provide two contact points. Reshape, or alter as needed. This protection is required at most-re-enactments, where flint shooters may stand and fire volleys shoulder-to-shoulder. .055" steel, it may be ben       FLASH-GD-2-GR-I . . . $8.99

Flint Flash Guard, two points of contact, unmarked, brass These brass flash guards, protect the shooter next to you from overspray vented from your flash hole. This flash guard is shaped with a long arm to provide two contact points. Reshape, or alter as needed. This protection is required at most-re-enactments, where flint shooters may stand and fire volleys shoulder-to-shoulder. .062" soft brass, it ma       FLASH-GD-2-UN-B . . . $8.99

has been added to your .

---