Carved from fancy maple, this Kentucky Pistol stock has a distinctive birds head grip, found on Kentucky pistols of the early to late flint period. The barrel channel is inlet for your 7/8" octagon 10" or shorter barrel. Drilled for a 5/16" ramrod. Inlet for small Siler flint or percussion lock, select a single or single set trigger of your choice.

Carved from plain walnut, this Kentucky Pistol stock has a distinctive birds head grip, found on Kentucky pistols of the early to late flint period. The barrel channel is inlet for your 7/8" octagon 10" or shorter barrel. Drilled for a 5/16" ramrod. Inlet for small Siler flint or percussion lock, select a single or single set trigger of your choice

This unsigned holster pistol appears to French in style. The pistol is stocked in European walnut and trimmed in steel furniture with bone sideplates. The iron furniture has aged to a dark brown patina. The round faced flintlock has been reconverted to flintlock with a modern cock assembly, pan, and frizzen. The octagon-to-round barrel has a silver

This reconverted double flintlock shotgun is stocked in walnut. The shotgun appears to have seen considerable use and was originally flintlock, converted to percussion, and has been converted back to flintlock. The Damascus barrels are 30-1/2" and have aged to a dark brown. The breech of the barrels is decorated with inlaid vine designs along the r

Stocked in maple, this Kentucky flint pistol has a .45 caliber 9" octagon barrel with a bright well maintained bore. The pistol is fitted with an L&R flintlock and trimmed in brass furniture. It will look great tucked in your belt at your next reenactment. This pistol points naturally and weighs 2.0 pounds. The .45 caliber 9" octagon barrel is rif

This Southern Longrifle is a copy of a longrifle signed Johanas Faber on the sideplate, shown in Rifles of Colonial America Volume 2 by the late Dr. George Shumway. Generally referred to as the Faber rifle, there is some speculation if the antique rifle is signed Faber or Huber due to the 18th century script. This longrifle was handmade by contempo

This flintlock Jaeger rifle is constructed in the style of a Germanic hunting rifle with a short swamped barrel, double set triggers. Stocked in claro walnut the rifle is trimmed with traditional brass furniture, all of which has been burnished bright. Weighing in at 8.7 pounds the rifle has a trigger reach of 13-1/4” and is well suited for today’s

This fine long rifle is a magnificent piece of work by the famous contemporary long-rifle maker, Mr. Robert Harn. This rifle is modeled after the antique rifle shown as No. 119 in Rifles of Colonial America, Volume 2, by the late George Shumway. The antique rifle is thought to have been made in a region with strong English connections. Expertly cra

New wax cast parts, for the experienced lock maker. Not a kit! The armories of France lead the world in advanced military musket design and production, during the 1700 - 1830 period. So many French musket models and variations were made and tested, even advanced collectors find the distinctions confusing. These parts are apparently exact copies fro

1746 - Willits, Brown Bess Musket Flint Lock Kit This lock kit is now fully assembled, tested for correct function, not polished. These First Model Brown Bess lock parts are cast directly from an original antique lock, by Willits - 1746. Parts are precision CNC machined, tempered, fitted and assembled. Overal length 6.68" by 1.18" tall. The mainspr

Build an early percussion longrifle, or converted flint Tennessee or late longrifle using our late Ketland cap lock. This “conversion" lock interchanges with our late Ketland flint lock. If you are planning a gun with interchangeable ignition, we recommend fitting the percussion lock first, to insure a good fit of the drum to the lock plate. The pl

John Bailes - London, right Percussion Conversion Lock Fine original flint locks were converted to percussion, during the 1825 to 1880 period. The flash hole was replaced with a powder drum and nipple, which we offer separately. Old time gunsmiths cut away the pan, discarded the frizzen, frizzen spring, and cock. A new hammer was added, and screws

cock, left, wax cast steel, 1.4" throw, tapped 1/4-28 A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4" to 1-1/8" octagon at the breech. Notice the "cut away" tumbler and "swing out" link, which great

frizzen, left, wax cast steel, as cast, temper after fitting A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4" to 1-1/8" octagon at the breech. Notice the "cut away" tumbler and "swing out" link, whic

mainspring, left, tempered steel, tempered A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4" to 1-1/8" octagon at the breech. Notice the "cut away" tumbler and "swing out" link, which greatly simplify

plate, left, wax cast steel, .94" x 5.1", tapped 6-40 A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4" to 1-1/8" octagon at the breech. Notice the "cut away" tumbler and "swing out" link, which great

Siler large left Percussion Conversion Lock Ideal for a left hand percussion longrifle, this Germanic style lock has the long pointed tail, raised lock plate with chamfered edges, and filed moulding across the tail, styles used during the 1750 - 1780 flint lock era. Originally designed as a flint lock, many longrifles were converted to percussion d

Siler large right Percussion Conversion Lock Ideal for a percussion longrifle, this Germanic style lock has the long pointed tail, raised lock plate with chamfered edges, and filed moulding across the tail, styles used during the 1750 - 1780 flint lock era. Originally designed as a flint lock, many longrifles were converted to percussion during the

This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck’s County, Pennsylvania. Our pre-inlet stocks are cut for either a 13/16”, or 7/8" straight octagon 42" barrel, pre-cut for a flared tang breech plug. The 3/8” ramrod hole is drilled full dep

This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck’s County, Pennsylvania. Our pre-inlet stocks are cut for a 13/16” straight octagon 42" barrel, pre-cut for a flared tang breech plug. The 3/8” ramrod hole is drilled full depth. Pre-inlet fo

This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck’s County, Pennsylvania. Our pre-inlet stocks are cut for a 13/16” straight octagon 42" barrel, pre-cut for a flared tang breech plug. The 3/8” ramrod hole is drilled full depth. Pre-inlet fo

This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck’s County, Pennsylvania. Our pre-inlet stocks are cut for a 13/16” straight octagon 42" barrel, pre-cut for a flared tang breech plug. The 3/8” ramrod hole is drilled full depth. Pre-inlet fo

This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck’s County, Pennsylvania. Our pre-inlet stocks are cut for a 7/8” straight octagon 42" barrel, pre-cut for a flared tang breech plug. The 3/8” ramrod hole is drilled full depth. Pre-inlet for

This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck’s County, Pennsylvania. Our pre-inlet stocks are cut for a 7/8” straight octagon 42" barrel, pre-cut for a flared tang breech plug. The 3/8” ramrod hole is drilled full depth. Pre-inlet for

This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck’s County, Pennsylvania. Our pre-inlet stocks are cut for a 7/8” straight octagon 42" barrel, pre-cut for a flared tang breech plug. The 3/8” ramrod hole is drilled full depth. Pre-inlet for