Your search for 'flint'
returned
739 results.
|
Breech plug, straight tang , 3/4-16 thread, for 15/16" or 1" octagon
Breech Plug , flint style, straight tang, 3/4-16 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.
|
|
|
Breech plug, straight tang , 3/4-16 thread, for 15/16" or 1" octagon, .550" journal length
Breech Plug , flint style, straight tang, 3/4-16 thread, with .550" journal length, for 15/16" or 1" octagon. Made in the USA, milled steel. Tang is about 3-1/8" length. This special plug with .550" thread length, is pre-cut to the exact length required by our 20 or 24 gauge, and .54, or .58 caliber rifled octagon-to-round barrel. Bend the tang to
|
|
|
Breech plug, straight tang , 5/8-18 thread, for 15/16" or 1" octagon
Breech Plug , flint style, straight tang, 5/8-18 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.
|
|
|
Breech plug, straight tang , 9/16-18 thread, for 15/16" or 1" octagon
Breech Plug , flint style, straight tang, 9/16-18 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.
|
|
|
Breech plug, straight tang , 3/4-16 thread, for 1-1/8" octagon
Breech Plug , flint style, straight tang, 3/4-16 thread, for 1-1/8" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.
|
|
|
Breech plug, straight tang , 7/8-14 thread, for 1-1/8" octagon
Breech Plug , flint style, straight tang, 7/8-14 thread, for 1-1/8" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.
|
|
Hooked Breech Plug, for Thompson Center Hawken Rifle , percussion, 15/16" octagon, with special 11/16-20 threads
Create a new barrel assembly for your Thompson Center Hawken rifle, or similar imported Hawken rifle by Investarm, Italy. Our hook will match the tang on your Cabela's, Lyman, or Investarm rifle, with very little hand fitting required. It will not fit replica rifles made in Spain. Tapped for a standard 1/4-28 nipple, order #RST-S Thompson Center d
|
|
Match Quality Rifle Barrel, .50 caliber, Jaeger , 31" swamped profile, 1-66" twist, 4.7 lb, crowned, flared tang plug, by Rice Barrel Company
Our most costly swamped rifle barrel, made in the USA, by L.C. & Liston Rice, Rice Muzzle Loading Rifle Barrels cost a bit more than other barrels, due to the extra attention given to the bore and surfaces. All bores are reamed, rifled, and "ball burnished" to a mirror finish, with a more uniform bore diameter than can be achieved with reaming al
|
|
|
Match Quality Rifle Barrel, .54 caliber, Jaeger , 31" swamped profile, 1-66" twist, 4.4 lb, crowned, flared tang plug, by Rice Barrel Company
Our most costly swamped rifle barrel, made in the USA, by L.C. & Liston Rice, Rice Muzzle Loading Rifle Barrels cost a bit more than other barrels, due to the extra attention given to the bore and surfaces. All bores are reamed, rifled, and "ball burnished" to a mirror finish, with a more uniform bore diameter than can be achieved with reaming al
|
|
|
Match Quality Rifle Barrel, .58 caliber, Jaeger , 31" swamped profile, 1-66" twist, 4.1 lb, crowned, flared tang plug, by Rice Barrel Company
Our most costly swamped rifle barrel, made in the USA, by L.C. & Liston Rice, Rice Muzzle Loading Rifle Barrels cost a bit more than other barrels, due to the extra attention given to the bore and surfaces. All bores are reamed, rifled, and "ball burnished" to a mirror finish, with a more uniform bore diameter than can be achieved with reaming al
|
|
|
Match Quality Rifle Barrel, .62 caliber, Jaeger , 31" swamped profile, 1-66" twist, 3.8 lb, crowned, flared tang plug, by Rice Barrel Company
Our most costly swamped rifle barrel, made in the USA, by L.C. & Liston Rice, Rice Muzzle Loading Rifle Barrels cost a bit more than other barrels, due to the extra attention given to the bore and surfaces. All bores are reamed, rifled, and "ball burnished" to a mirror finish, with a more uniform bore diameter than can be achieved with reaming al
|
|
|
Rice Jaeger profile, 31" swamped octagon barrel , includes flared tang plug
Our most costly swamped rifle barrel, made in the USA, by L.C. & Liston Rice, Rice Muzzle Loading Rifle Barrels cost a bit more than other barrels, due to the extra attention given to the bore and surfaces. All bores are reamed, rifled, and "ball burnished" to a mirror finish, with a more uniform bore diameter than can be achieved with reaming al
|
|
Octagon Pistol Ramrod Pipes, for 5/16" or 3/8" rod, brass or nickel silver
Shown in side view, and top view, these short ramrod pipes are octagon, round at each end, for 5/16 or 3/8" ramrod, in your choice of brass or nickel silver, for fullstock pistols. They may be easily modified for a halfstock pistol. Designed by Tedd Cash, these are ideal for use on our Kentucky pistol stocks, and Dueling pistol stocks. Our entry p
|
|
Round Ringed Ramrod Pipes, for 3/8'' rod, brass or nickel silver
Shown in side view, and top view, these short ramrod pipes are round with rings at each end, for 3/8" ramrod, in your choice of brass or nickel silver, for fullstock pistols. They may be easily modified for a halfstock pistol. Designed by Tedd Cash, for use on the George Washington Holster Pistol , these are ideal for use on our Kentucky pistol sto
|
|
Snuff box, 2-3/4" round, polished brass, made in the U.S.A.
A neatly made round box, of heavy brass, highly polished. The lid fits the base snugly, and is easily removed. About 1" deep, and nearly 2-3/4" diameter. Most brands of modern smokeless tobacco "snuff" (i.e. Copenhagen or Skoal) will fit neatly within this box, but our flint & steel fire striker will not fit. It is a nice large box for carrying an
|
|
Snuff box, 2-3/4" round, polished copper, made in the U.S.A.
A neatly made round box, of heavy copper, highly polished. The lid fits the base snugly, and is easily removed. About 1" deep, and nearly 2-3/4" diameter. Most brands of modern smokeless tobacco "snuff" (i.e. Copenhagen or Skoal) will fit neatly within this box, but our flint & steel fire striker will not fit. It is a nice large box for carrying a
|
|
Snuff box, 2-3/4" round, polished nickel silver, made in the U.S.A.
A neatly made round box, of heavy nickel silver, highly polished. The lid fits the base snugly, and is easily removed. About 1" deep, and nearly 2-3/4" diameter. Most brands of modern smokeless tobacco "snuff" (i.e. Copenhagen or Skoal) will fit neatly within this box, but our flint & steel fire striker will not fit. It is a nice large box for car
|
|
Sideplate for a 1746 First Model Brown Bess Musket , wax cast brass
This early flint musket sideplate has a domed surface, with two counterbored holes. This sideplate is pre-inlet into our First Model Brown Bess stock, circa 1746. Wax cast brass. Overall length 6-3/8", height 1-3/8", thickness 0.200". Made in the USA, by Track of the Wolf, Inc., in our own molds, copied directly from the original antique musket. Sh
|
|
Sideplate for a Fowling Gun, Early Rifle, or Fusil , wax cast brass
This simple early sideplate has an attractive pointed tail. Long enough for larger flint locks, or shorten the front end for symmetry around the front lock bolt, on rifle size locks. French influenced, this sideplate is very similar to the French Type D fusil sideplate. Wax cast brass. Made in the USA. Overall length 5-1/2", height 1-1/16", thickne
|
|
Sideplate for a Fowling Gun, Early Rifle, or Fusil , iron (wax cast steel)
This simple early sideplate has an attractive pointed tail. Long enough for larger flint locks, or shorten the front end for symmetry around the front lock bolt, on rifle size locks. French influenced, this sideplate is very similar to the French Type D fusil sideplate. Wax cast steel. Made in the USA. Overall length 5-1/2", height 1-1/16", thickne
|
|
Sideplate for a French Fusil , wax cast brass
Engraving is cast in. Bolt holes are about perfect for our French Type “C”, Type “D”, Tulle, L & R Trade Lock, Twigg, Early Ketland and similar flintlocks. Shorten the front for smaller locks. Matching triggerguard and buttplate are available. Wax cast in brass. Made in the USA. Overall length 5-7/16", height 1", thickness 0.070". This simple early
|
|
Sideplate for a French Fusil , iron (wax cast steel)
Engraving is cast in. Bolt holes are about perfect for our French Type “C”, Type “D”, Tulle, L & R Trade Lock, Twigg, Early Ketland and similar flintlocks. Shorten the front for smaller locks. Matching triggerguard and buttplate are available. Wax cast steel. Made in the USA. Overall length 5-7/16", height 1", thickness 0.070". This simple early si
|
|
Sideplate for a French Type 'C' Fusil , wax cast brass
An elegant French sideplate design. A framed oval, surrounded by rococo S and C shaped scrolls. Wax cast brass, this sideplate may be inlet or surface mounted. The long end for the front lock bolt may be cut to fit your flint lock. Made in the USA. Overall length 5-1/8", height 1", thickness 0.070". Shown in exact full size photography, in our full
|