Tennessee Lollipop Breech Plug , 9/16-18 thread, for 7/8" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 7/8" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to ma       PLUG-TN-14-9 . . . $24.99

Tennessee lollipop Breech Plug , 5/8-18 thread, for 15/16" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 15/16" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to       PLUG-TN-15-5 . . . $24.99

Tennessee Lollipop Breech Plug , 3/4-16 thread, for 1" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 1" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to matc       PLUG-TN-16-3 . . . $24.99

Tennessee Lollipop Breech Plug , 5/8-18 thread, for 1" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 1" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to matc       PLUG-TN-16-5 . . . $24.99

Dueling pistol , pre-shaped stocks, non-inlet 13/16" octagon barrel Carved from plain cherry, plain maple, or curly maple. This Kentucky pistol stock is described as a Dueling Pistol shape, because it has the distinctive flats on the grips, found on both Kentucky pistols and English dueling pistols of the late flint period. The barrel channel is inlet for your 13/16" octagon 10" or shorter barrel. Drilled for a 5/1

Stock, Dueling pistol , pre-shaped, non-inlet 13/16" barrel, plain maple Carved from maple, selected for strength of grain, with slight figure. This Kentucky Pistol stock is described as a Dueling Pistol shape, because it has the distinctive flats on the grips, found on both Kentucky pistols and English dueling pistols of the late flint period. The barrel channel is inlet for your 13/16" octagon 10" or shorter barrel. D       STK-DP-13-M1 . . . $73.50

Stock, Dueling pistol , pre-shaped, non-inlet 13/16" barrel, curly maple Carved from curly maple, selected for tiger stripe figure. This Kentucky Pistol stock is described as a Dueling Pistol shape, because it has the distinctive flats on the grips, found on both Kentucky pistols and English dueling pistols of the late flint period. The barrel channel is inlet for your 13/16" octagon 10" or shorter barrel. Drilled for a       STK-DP-13-M3 . . . $115.00

Stock, Dueling pistol , pre-shaped, non-inlet 13/16" barrel, plain walnut Carved from plain walnut, this Kentucky pistol stock is described as a Dueling Pistol shape, because it has the distinctive flats on the grips, found on both Kentucky pistols and English dueling pistols of the late flint period. The barrel channel is inlet for your 13/16" octagon 10" or shorter barrel. Drilled for a 5/16" ramrod. Not inlet for lock       STK-DP-13-W1 . . . $89.00

French Fusil , pre shaped stock, pre-inlet, Colerain "C" profile 44" fowler barrel, Fusil lock Pre-inlet on Allen's patent 5 axis pantograph, this stock is shaped forward of the lock panels, squared to the muzzle. The forend is easily shaped after drilling for pins. Stock is pre-inlet for Tulle lock, 44" barrel, buttplate, trigger, and trigger plate, this stock is drilled full depth for a 3/8" rod. Pull length is about 14", drop is 4" measur

Stock, French Fusil , pre-inlet Colerain "C" profile 44" fowler barrel, Fusil lock, plain maple Pre-inlet on Allen's patent 5 axis pantograph, this stock is shaped forward of the lock panels, squared to the muzzle. The forend is easily shaped after drilling for pins. Stock is pre-inlet for Tulle lock, 44" barrel, buttplate, trigger, and trigger plate, this stock is drilled full depth for a 3/8" rod. Pull length is about 14", drop is 4" measur       STK-FUSIL-2-M1 . . . $279.00

Stock, French Fusil , pre-inlet Colerain "C" profile 44" fowler barrel, Fusil lock, fancy maple Pre-inlet on Allen's patent 5 axis pantograph, this stock is shaped forward of the lock panels, squared to the muzzle. The forend is easily shaped after drilling for pins. Stock is pre-inlet for Tulle lock, 44" barrel, buttplate, trigger, and trigger plate, this stock is drilled full depth for a 3/8" rod. Pull length is about 14", drop is 4" measur       STK-FUSIL-2-M3 . . . $320.00

Stock, French Fusil , pre-inlet Colerain "C" profile 44" fowler barrel, Fusil lock, plain walnut Pre-inlet on Allen's patent 5 axis pantograph, this stock is shaped forward of the lock panels, squared to the muzzle. The forend is easily shaped after drilling for pins. Stock is pre-inlet for Tulle lock, 44" barrel, buttplate, trigger, and trigger plate, this stock is drilled full depth for a 3/8" rod. Pull length is about 14", drop is 4" measur       STK-FUSIL-2-W1 . . . $390.00

Track's best primitive Strike-a-Light fire making kit A petite young lady reports winning a regional competition with our striker, producing a flame in only two seconds. Wow! This fire making kit includes: #Striker-File: Authentic and well proportioned, our fire striker fits neatly in our popular oval tinder and tobacco boxes. Striker measures about 3-3/8" long and has been hand forged. Our special       STRIKE-A-LIGHT-SET . . . $59.47

Triggerguard, American Longrifle or Fowler , sand cast brass This elegant flint era triggerguard is a yellow brass sand casting. Long enough for double set triggers, it may have been used with a scroll back single trigger. Use this triggerguard on a fine flint fowling gun or transitional American longrifle combining German and English influences. Overall length is 10-3/4", inside trigger bow is 2-5/16" long,       TG-MA-121-B . . . $20.99

Vent, Touch Hole Liner , 5-.8mm thread, stainless steel, slotted for easy removal for Austin & Halleck Mountain Rifle Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 5-.8mm, made in the USA, stainless steel, slotted for easy removal. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly above the pan to frizzen joi       THL-AHMR . . . $5.99

Vent, Touch Hole Liner , 5-.8mm thread, stainless steel, slotted for easy removal for Traditions and CVA guns Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 5-.8mm, made in the USA, stainless steel, slotted for easy removal. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly above the pan to frizzen joi       THL-CVA-S . . . $5.99

Vent, Touch Hole Liner , M8-1.25 thread, stainless steel, slotted for easy removal for Davide Pedersoli guns Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded M8-1.25, made in the USA, stainless steel, slotted for easy removal. This liner is used on Davide Pedersoli Frontier longrifles, or Cabela's Blue Ridge longrifles. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the       THL-DP-S . . . $5.99

Vent, Touch Hole Liner , 6-.75mm thread, stainless steel, slotted for easy removal for Investarms produced Lyman Great Plains, Trade, & Deerstalker rifles Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 6-.75mm, made in the USA, stainless steel, slotted for easy removal. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly above the pan to frizzen jo       THL-LYMAN-S . . . $5.99

Vent, Touch Hole Liner , 8-1.25mm Metric Left hand thread, ampco bronze, slotted for easy removal for Bondini - Italy guns Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded with special metric left hand threads, made in Italy, ampco bronze, slotted for easy removal. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly ab       THL-MET-L . . . $3.99

Vent, Touch Hole Liner , 1/4-28 thread, stainless steel, slotted for easy removal Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 1/4-28, made in the USA, stainless steel, slotted for easy removal. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly above the pan to frizzen joi       THL-S4S . . . $4.99

Vent, Touch Hole Liner , 1/4-28 thread, stainless steel, with lug for easy installation Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 1/4-28, stainless steel with lug for easy installation, made in the USA. Drill, tap, and countersink the barrel. Use the wrench lug to install the liner and seat against the barrel. Check the liner protrusion into the bore, remove and trim length if necessary. Cut the       THL-S4W . . . $4.99

Vent, Touch Hole Liner , 5/16-24 thread, stainless steel, slotted for easy removal Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 5/16-24, made in the USA, stainless steel, slotted for easy removal. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly above the pan to frizzen jo       THL-S5S . . . $4.99

Vent, Touch Hole Liner , 3/8-24 thread, stainless steel, slotted for easy removal Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 3/8-24, made in the USA, stainless steel, slotted for easy removal. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly above the pan to frizzen joi       THL-S6S . . . $4.99

Vent, Touch Hole Liner , for Thompson Center flintlock rifles, 1/4-28 thread, stainless steel, slotted for easy removal Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 1/4-28, made in the USA, stainless steel, slotted for easy removal. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly above the pan to frizzen joi       THL-TCF . . . $5.99

Vent, Touch Hole Liner , 1/4-32 thread, carbon steel, White Lightnin' Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Known as the White Lightnin' vent, the special 1/4-32 fine threads allow an extra large concave cavity inside, for use on 13/16" to 1" octagon barrels. Made in the USA, carbon steel, with removable lug for easy installation. Simply drill out your existing vent hole with out tap       THL-W4I . . . $5.99

has been added to your .

---