Fusil or Fowler Ramrod Pipes , octagon, polished brass Shown in side view, and top view, these French octagon ramrod pipes are octagon with rounds at each end, for your choice of 3/8" ramrod, available in your brass only, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, for use on fowler or fusil, these are ideal for use on many of our

Antique Double Barrel Shotgun , 12 gauge, 32" Damascus barrels, percussion, walnut, iron furniture, made in Belgium This antique double barrel percussion shotgun is stocked in checkered walnut with damascus 12 gauge barrels.  The barrels have Belgian proof marks, but otherwise this shotgun is unsigned. The furniture is iron with a brass cap box and nickel silver escutcheon plates around the wedge key. The stock has some sanding marks, and a gloss finish has been       AAV-692 . . . $999.00

American Fowling Gun , 12 gauge 44" octagon-to-round Colerain barrel, early Ketland flint lock, maple, brass, by Nathan McKenzie Based on the original fowling guns produced in New England from 1740 to 1780 which recycled parts from earlier muskets. This piece is signed by contemporary builder Mr. Nathan McKenzie and has a blend of French and English styled parts. For more information on similar American fowling guns, we recommend the book Flintlock Fowlers, The First Guns M       AAV-821 . . .

French Tulle Fusil-de-Chasse Ramrod Pipes, for 3/8'' rod, wax cast brass or iron Shown in side view, and top view, these ramrod pipes are shaped, with delicate ringed ends. Designed to accept a 3/8" diameter ramrod as cast, in your choice of brass or iron (steel), for fullstock. Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-3/8" length, about 3-1/2" overall, including the skirt. Your cho

John & Caleb Vincent Ramrod Pipes, , octagon for fullstock rifles, for 5/16", or 3/8" rod, brass or nickel silver Shown in side view, and top view, these John & Caleb Vincent ramrod pipes are octagon with rings at each end, in your choice of 5/16", or 3/8" ramrod, in your choice of brass or nickel silver, for fullstock rifles. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, these are ideal for use on John & Caleb Vincent Ohio fu

Fancy Octagon Ramrod Pipes, with thumbnail skirt, for 5/16", 3/8", or 7/16" rod, brass or nickel silver Shown in side view, and top view, these fancy octagon ramrod pipes are octagon with rounds at each end, for your choice of 5/16", 3/8", 7/16" ramrod, in your choice of brass or nickel silver, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, for use on Golden Age era longrifles , th

Antique English Pistol , .58 caliber smoothbore, 9" swamped barrel, figured walnut, engraved iron trim, flintlock, repaired stock, signed Knubley This antique English pistol is stocked in walnut and trimmed in engraved steel furniture. The forearm of the pistol has been replaced from the forward ramrod pipe to the muzzle. A nickel silver ramrod pipe was fitted. The pistol is assembled with a swamped octagon .58 caliber smoothbore barrel, mated to a very fine English flintlock with sliding sa       AAV-315 . . . $2,599.00

John Armstrong Ramrod Pipes for 3/8" rod, Maryland style, wax cast brass, or steel Shown in side view, and top view, these ramrod pipes are shaped, with a octagon body and delicate ringed ends. Designed to accept a 3/8" diameter ramrod as cast, in your choice of brass or iron (steel), for a golden age fullstock rifle. Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 2" length, about 3-29-64" ov

H. E. Leman Trade Rifle , pre shaped stock, left hand, non-inlet 15/16", 1" or 1-1/8" octagon, 42" barrel Fullstock rifles were made for the early westbound trade, by Henry Eicholtz Leman at his factory in Lancaster, Pennsylvania. Leman often used plain maple, and painted the stripes. Choose your parts, order our full size plans for the Leman rifle, and build your own. The left hand Leman fullstock trade rifle is an easy first scratch-building project.

CVA Frontier Carbine , .50 caliber, 24" barrel, percussion, beech, brass, used, by Connecticut Valley Arms This CVA Frontier Carbine is stocked in beech, finished as maple, trimmed in brass furniture, and fitted with adjustable sights. The stock has a few scattered handling marks from use. The bore of this rifle is bright and has been well maintained. This .50 caliber rifle is short, light, and will be handy to carry in the deep woods. The trigger reach       AAV-783 . . .

CVA Mountain Rifle , .54 caliber, 32" barrel, flintlock, maple, iron trim, used, by Connecticut Valley Arms This CVA Mountain Rifle is stocked in birdseye maple, trimmed in browned iron furniture, and decorated with nickel silver oval inlays. This rifle was originally factory assembled as a percussion gun, but has now been converted to flintlock. The percussion drum has been removed and a large vent liner has been fitted. The CVA flint lock is factory en       AAV-820 . . .

Ramrod tip , .45 & larger, pistol, flared, steel, for 5/16" iron tip, 8-32 This flared iron loading button fits our #RT-5-8-I iron tip for 5/16" ramrod, with 8-32 threads. The button end flares to 7/16" diameter, to fit .44 and larger bores. It adds 3/16" length to your ramrod. Often used on Duelling Pistols and Kentucky Pistols, it makes loading easy, but can be removed to use an 8-32 threaded cleaning jag, patch worm, o       RT-45-5-8-I . . . $1.99

Stock, H. E. Leman Trade Rifle , pre shaped, non-inlet 15/16" octagon, 42" barrel, plain maple Fullstock rifles were made for the early westbound trade, by Henry Eicholtz Leman at his factory in Lancaster, Pennsylvania. Leman often used plain maple, and painted the stripes. Choose your parts, order our full size plans for the Leman rifle, and build your own. The Leman fullstock trade rifle is an easy first scratch-building project. Butt end       STK-LE-15-M1 . . . $179.00

Stock, H. E. Leman Trade Rifle , pre shaped, non-inlet 15/16" octagon, 42" barrel, semi-fancy maple Fullstock rifles were made for the early westbound trade, by Henry Eicholtz Leman at his factory in Lancaster, Pennsylvania. Leman often used plain maple, and painted the stripes. Choose your parts, order our full size plans for the Leman rifle, and build your own. The Leman fullstock trade rifle is an easy first scratch-building project. Butt end       STK-LE-15-M2 . . . $199.00

Stock, H. E. Leman Trade Rifle , pre shaped, non-inlet 15/16" octagon, 42" barrel, fancy maple Fullstock rifles were made for the early westbound trade, by Henry Eicholtz Leman at his factory in Lancaster, Pennsylvania. Leman often used plain maple, and painted the stripes. Choose your parts, order our full size plans for the Leman rifle, and build your own. The Leman fullstock trade rifle is an easy first scratch-building project. Butt end       STK-LE-15-M3 . . . $269.00

Stock, H. E. Leman Trade Rifle , pre shaped, non-inlet 1" octagon, 42" barrel, plain maple Fullstock rifles were made for the early westbound trade, by Henry Eicholtz Leman at his factory in Lancaster, Pennsylvania. Leman often used plain maple, and painted the stripes. Choose your parts, order our full size plans for the Leman rifle, and build your own. The Leman fullstock trade rifle is an easy first scratch-building project. Butt end       STK-LE-16-M1 . . . $179.00

Stock, H. E. Leman Trade Rifle , pre shaped, non-inlet 1" octagon, 42" barrel, fancy maple Fullstock rifles were made for the early westbound trade, by Henry Eicholtz Leman at his factory in Lancaster, Pennsylvania. Leman often used plain maple, and painted the stripes. Choose your parts, order our full size plans for the Leman rifle, and build your own. The Leman fullstock trade rifle is an easy first scratch-building project. Butt end       STK-LE-16-M3 . . . $269.00

H. E. Leman Trade Rifle , pre shaped stock, non-inlet 15/16", or 1" octagon, 42" barrel Fullstock rifles were made for the early westbound trade, by Henry Eicholtz Leman at his factory in Lancaster, Pennsylvania. Leman often used plain maple, and painted the stripes. Choose your parts, order our full size plans for the Leman rifle, and build your own. The Leman fullstock trade rifle is an easy first scratch-building project. Butt end

Ramrod tip , 9/16" tapering 7/16", brass, First Model Brown Bess & early muskets, 1-4/10" long This tapered ramrod tip is just under 9/16" diameter tapering to 7/16" diameter at the base. It has a hole at the base. Use a 7/16" hickory ramrod #RAMROD-7-H and turn the end down to 3/8" and install this tip. For use with a First Model Long Land Pattern Brown Bess Musket. Overall length 1.4".       RT-BESS-7-B . . . $5.00

Ramrod tip , 7/16" flared, iron, First Model Brown Bess & early muskets, 1-4/10" long This tapered ramrod tip is just under 9/16" diameter tapering to 7/16" diameter at the base. It has a hole at the base. Use a 7/16" hickory ramrod #RAMROD-7-H and turn the end down to 3/8" and install this tip. For use with a First Model Long Land Pattern Brown Bess Musket. Overall length 1.4".       RT-BESS-7-I . . . $5.00

Classic Tennessee , pre shaped, non-inlet stock, 13/16" octagon, 42" barrel This classic Tennessee fullstock is made without lock or trigger mortise, so you may hand inlet your favorite lock and trigger. Pre-inlet for any light weight 13/16” straight octagon 42” barrel, and drilled full depth for a 3/8” ramrod hole, it has a straight comb. Trigger reach may be adjusted up to 15”, with 4-1/2” drop. Butt end is 5 x 1-1/2”, n

Stock, Classic Tennessee , pre shaped, non-inlet 13/16" octagon, 42" barrel, plain maple This classic Tennessee fullstock is made without lock or trigger mortise, so you may hand inlet your favorite lock and trigger. Pre-inlet for any light weight 13/16” straight octagon 42” barrel, and drilled full depth for a 3/8” ramrod hole, it has a straight comb. Trigger reach may be adjusted up to 15”, with 4-1/2” drop. Butt end is 5 x 1-1/2”, n       STK-CT-13-M1 . . . $179.00

Stock, Classic Tennessee , pre shaped, non-inlet , 13/16" octagon, 42" barrel, semi-fancy maple This classic Tennessee fullstock is made without lock or trigger mortise, so you may hand inlet your favorite lock and trigger. Pre-inlet for any light weight 13/16” straight octagon 42” barrel, and drilled full depth for a 3/8” ramrod hole, it has a straight comb. Trigger reach may be adjusted up to 15”, with 4-1/2” drop. Butt end is 5 x 1-1/2”, n       STK-CT-13-M2 . . . $199.00

Stock, Classic Tennessee , pre shaped, non-inlet , 13/16" octagon, 42" barrel, fancy maple This classic Tennessee fullstock is made without lock or trigger mortise, so you may hand inlet your favorite lock and trigger. Pre-inlet for any light weight 13/16” straight octagon 42” barrel, and drilled full depth for a 3/8” ramrod hole, it has a straight comb. Trigger reach may be adjusted up to 15”, with 4-1/2” drop. Butt end is 5 x 1-1/2”, n       STK-CT-13-M3 . . . $250.00

stock, Lancaster , pre shaped, non-inlet, 13/16" octagon, 42" barrel, plain maple Our classic 1790 - 1810 era Lancaster County longrifle fullstock is from the “golden age of longrifles”, following our revolution. Refined from earlier designs, this graceful longrifle stock from the end of the flint era is thought to be the high point of artistic achievement, by many collectors, shooters, and rifle builders. Cut for a 13/16” strai       STK-LA-13-M1 . . . $179.00

has been added to your .

---