Kentucky Pistol, .54 caliber, 7-1/2" octagon-to-round barrel, Siler flintlock, curly maple, Georgian style silver furniture, as-new

Home > Guns > Flintlock guns > Flintlock pistols

Kentucky Pistol,
.54 caliber, 7-1/2" octagon-to-round barrel,
Siler flintlock, curly maple, Georgian style silver furniture, as-new

Part Number:	AAW-354
Availability:
Price:	$2,199.00
Order Quantity:

This Kentucky pistol is stocked in curly maple that displays swirls of figure over the length of the stock. This pistol is trimmed in neatly fitted sterling silver Georgian style furniture. A few Colonial American makers produced pistols with Georgian style furniture, such as J.P. Beck from Lancaster, Pennsylvania. The sterling silver furniture has a satin hand burnished tone and nicely compliments the tone of the maple stock. The octagon-to-round barrel and the small Siler flintlock are finished armory bright. The frizzen has only a few marks from spark testing.

The 7-1/2" octagon-round barrel has a 4" tapered octagon breech with a single wedding band to round. The .54 caliber bore is rifled for a patched round ball. The bore is bright and appears as-new. The barrel does not have any sights in holster pistol fashion, where the pistol was designed to be used at close range. The barrel is finished armoury bright. Also finished bright, the small Siler flintlock has a crisp action and a well hardened frizzen. When using our best 5/8" knapped gun flints, the lock will throw a shower of sparks into the pan. Blending into the bright finish a stainless steel vent liner is well centered and positioned at the top edge of the pan to provide best ignition.

The maple stock has a slender grip fitted with a grotesque mask buttcap. Viewed from above the breech end of the barrel is fitted with a flared tang with a thumbnail finial. The tang is surrounded by a panel of raised carving with a checkered crown design. The lock panels taper widest at the rear in early gun fashion and the stock is shaped with graceful slender proportions.The triggerguard is correctly mounted by one steel screw and dowel pins. The rear extension has been neatly inlet into the pistol grip. All of the sterling silver furniture is finished to a hand burnished satin appearance. The buttcap is shaped with a grotesque mask mounted with a iron screw. The slender 5/16" diameter ramrod has a tapered and flared end, it does not have any provisions for threaded accessories. We recommend using a pistol loading rod, our #PL-7-54, and leaving this well fitted ramrod with the pistol. Two lock bolts secure the small Siler flintlock to the pistol. The sterling silver sideplate is burnished bright with a chiseled design with flowing scrolls. The elaborate openwork design is patterned from a antique example, which was designed to show the skill of the inletting by the English gunmakers of the period.

Neatly fitted and finished this light weight Kentucky pistol with its' 18th century styling, will be a delight to carry at the an historical event. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.530" round balls, pure lead, Hornady, per 100

Part Number:	BALL-530
Availability:
Price:	$24.99
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Ball puller, steel screw, .54 caliber brass collar, 10-32 thread

Part Number:	BP-54-10
Availability:
Price:	$3.99
Order Quantity:

Bore brush, bronze, for .54 caliber, 10-32 thread

Part Number:	BRUSH-54-10
Availability:
Price:	$4.29
Order Quantity:

Flint priming flask, throws about 3 grains, brass

Part Number:	FLASK-PP-3
Availability:
Price:	$19.99
Order Quantity:

French amber gun flint, 5/8 x 3/4" for small Siler, L&R Bailes, CVA, T/C, Pedersoli. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.

Part Number:	FLINT-AMBER-5
Availability:
Price:	$2.90

Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread

Part Number:	FS-54-10
Availability:
Price:	$4.29
Order Quantity:

Jag, jagged cleaning tip, brass, .54 caliber, 3/8" rod, 10-32 thread

Part Number:	JS-54-6-10
Availability:
Price:	$5.09
Order Quantity:

Powder measure, brass, adjustable 0 to 120 grains, with spout

Part Number:	MAS-120
Availability:
Price:	$22.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$8.59

Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry

Part Number:	OX-10-50-D
Availability:
Price:	$4.99
Order Quantity:

Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber

Part Number:	OX-CLEAN-58C
Availability:
Price:	$5.79
Order Quantity:

Pick & Pan Brush, with brass chain, button clasp, and black bristle brush, for flint musket, rifle, or fowler

Part Number:	PICK-BRUSH-H
Availability:
Price:	$15.99
Order Quantity:

Pistol loading rod and short starter with .54 caliber cleaning jag, 3/8" diameter hickory rod, 10-32 threads, 12" overall usable length including .54 caliber cleaning jag

Part Number:	PL-6-54
Availability:
Price:	$20.08
Order Quantity:

Primitive Rifleman's Turn Screw, hand forged tempered steel screwdriver, to fit in a longrifle patchbox

Part Number:	TOOL-TURN-U
Availability:
Price:	$8.99
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Top of Page Home > Guns > Flintlock guns > Flintlock pistols