Sideplate with Spade Finial for left hand Classic Longrifles , brass Wax cast in matching right and left hand versions with a spade tail finial, graceful front with swept curves and chamfered upper edge. Inlet this sideplate half depth. Counter-bored for our lock bolts with 3/8" heads. Holes are perfectly spaced for L&R's Durs Egg lock. Left hand. Overall length 4-7/8", height 15/16", thickness 0.150".       SP-LR-31-B . . . $27.50

Sideplate with Spade Finial for left hand Classic Longrifles , iron Wax cast in matching right and left hand versions with a spade tail finial, graceful front with swept curves and chamfered upper edge. Inlet this sideplate half depth. Counter-bored for our lock bolts with 3/8" heads. Holes are perfectly spaced for L&R's Durs Egg lock. Left hand. Overall length 4-7/8", height 15/16", thickness 0.150".       SP-LR-31-I . . . $19.75

Sideplate for our Pennsylvania Rifles , brass This wax cast sideplate was used by gunsmiths in several regions of Pennsylvania during the 1790-1820 era. Long enough for early large locks. You may shorten it enough for smaller locks. Available in brass only. Overall length 5-1/16", height 15/16", thickness 0.120".       SP-PENN-B . . . $22.50

Sideplate for Herman Rupp Lehigh Valley Longrifle, wax cast brass This Lehigh Valley sideplate has a arrow head pointed tail with molding and cast in grooves. Patterned from a sideplate on a Herman Rupp longrifle, it would be ideal for other makers of the Allentown-Bethlehem region. Lock bolt are as cast for 8-32 lock bolts with 3/8" diameter heads, enlarge the clearance hole with a 13/64" drill bit to accept 10-       SP-RUPP-2-B . . . $21.59

Sideplate for Herman Rupp Lehigh Valley Longrifle, wax cast steel This Lehigh Valley sideplate has a arrow head pointed tail with molding and cast in grooves. Patterned from a sideplate on a Herman Rupp longrifle, it would be ideal for other makers of the Allentown-Bethlehem region. Lock bolt are as cast for 8-32 lock bolts with 3/8" diameter heads, enlarge the clearance hole with a 13/64" drill bit to accept 10-       SP-RUPP-2-I . . . $17.59

Sideplate for your Classic Longrifles , brass Similar to the Lancaster sideplates with a pointed tail, this sideplate is typical of those by Herman Rupp and other makers of the Allentown-Bethlehem region. For L&R Dickert or Siler's large lock. Easily shortened to fit popular smaller locks. Cut sheet brass, made in the U.S.A.. Overall length 4-11/16", height 1-1/16", thickness 0.080".       SP-RUPP-B . . . $10.99

Sideplate for your C lassic Longrifles , nickel silver Similar to the Lancaster sideplates with a pointed tail, this sideplate is typical of those by Herman Rupp and other makers of the Allentown-Bethlehem region. For L&R Dickert or Siler's large lock. Easily shortened to fit popular smaller locks. Cut sheet nickel silver (aka German silver), made in the U.S.A.. Overall length 4-11/16", height 1-1/16",       SP-RUPP-S . . . $11.99

Sideplate for a French TULLE Fusil Fin , wax cast brass French sideplate, convex, for a Tulle fine fusil (fusil-fin), or fancy fusil-de-chasse. This sideplate may be inlet slightly, but is most often surface mounted. Ideal for use with our 3/8" deluxe dome head bolts, with 8-32 or 10-32 thread. Wax cast brass. Lock bolt holes are spaced 3" on center, to fit a fusil or fowler size flint lock. Wax cast br       SP-TULLE-1-B . . . $21.59

Sideplate for a French TULLE Fusil Fin , iron French sideplate, convex, for a Tulle fine fusil (fusil-fin), or fancy fusil-de-chasse. This sideplate may be inlet slightly, but is most often surface mounted. Ideal for use with our 3/8" deluxe dome head bolts, with 8-32 or 10-32 thread. Wax cast brass. Lock bolt holes are spaced 3" on center, to fit a fusil or fowler size flint lock. Our #SP-Tul       SP-TULLE-1-I . . . $17.59

Sideplate for A. Verner, Bucks County Longrifle , wax cast brass A classic Bucks County, or Allentown - Bethlehem, Pennsylvania style sideplate. Note the round front and center areas for lock bolts. They are spaced for a large Siler, L&R, or similar sized lock. Wax cast brass only, made in the USA. Overall length 5-1/16", height 1-1/16", thickness 0.130". Shown in exact full size photography, in our full line Ca       SP-VERNER-1-B . . . $20.59

Hand Stamp for Northwest Gun , Edward Bond's inspection mark for Hudson's Bay Company Northwest Trade Gun, hardened steel, made in the USA, by Track of the Wolf, Inc. The tombstone with a Sitting Fox over E.B. was used by Edward Bond to mark Hudson's Bay Company Trade Guns on both the locks and barrel. The top flat of the barrel was marked approximately 1" from the breech. The lock was marked on the plate ahead of the cock. This "Sitting Fox" logo was derived from the top of the HB Co. logo. The inspector's mark       STAMP-EB . . . $29.99

Hand Stamp for Northwest Gun , Sitting Fox in a Circle Northwest Trade Gun, hardened steel, made in the USA, by Track of the Wolf, Inc. The Sitting Fox in a circle for use on a NorthWest Trade Gun on both the locks and barrel. The top flat of the barrel was marked approximately 1" from the breech. The lock was marked on the plate ahead of the cock. The inspector's mark is about .4" in diameter, and the tool body is 2-1/2" length, 1/2" diameter, brightly polished steel, hardened to       STAMP-FC . . . $29.99

Triggerguard, Lebanon County , sand cast brass This Lebanon County style triggerguard is a yellow brass sand casting. The bow is long enough for double set triggers if desired, and the casting is malleable to allow bending and shaping to fit your rifle's design. This triggerguard is reported to have been a favorite of the late Theodore P. Cole, whose replica flint lock was one of the first repr       TG-MA-45-B . . . $20.99

Mainspring Vise, deluxe English style , for safely compressing a mainspring, made in the U.S.A. Every experienced gunsmith knows the value of an adjustable mainspring vise. Avoid scratching your mainspring. Scratches form stress marks eventually causing breakage. Our English style mainspring vise is case hardened steel, with sliding adjustment arm. Works well on both large and small locks. Made in the U.S.A. Best practis is to draw the lock t       TOOL-VISE-DX . . . $39.99

Hawken Double Set Trigger , with curved front trigger, by L & R The late style curved front trigger distinguishes this trigger from the nearly identical early straight front trigger. Made by L&R Lock Co., each trigger bears their touchmark. Double lever style, it has enough backlash to allow the lock to be cocked and fired, with the trigger set or unset. Spare parts may be used in identical triggers from the ol       TR-LR-1400 . . . $100.00

Double Set Double Lever Triggers , curled front trigger, back lash adjustment screw, by L&R This new double set trigger by L&R has a higher front trigger blade, a longer travel ramp to accommodate a wider range of adjustment, back lash adjustment screw. The front trigger has a decorative front curl. The maximum spacing of the front and rear triggers is 1-1/4". Compare this distance to your choice of triggerguards. The trigger plate is abo       TR-LR-1710 . . . $75.00

Double Lever Double Set Trigger , straight front trigger, backlash adjustment screw, by L&R This new double set trigger by L&R has a higher front trigger blade, a longer travel ramp to accommodate a wider range of adjustment, back lash adjustment screw. The front trigger is straight. The maximum spacing of the front and rear triggers is 1-1/4". Compare this distance to your choice of triggerguards. The trigger plate is about .400" wide. D       TR-LR-1810 . . . $75.00

Double Set Trigger straight front trigger, long rear trigger, backlash adjustment screw, by L&R's Early American longrifle, or Jaeger Rifle Suitable for many early longrifles with a long closed or open-ended bow. These include: Lancaster, Berk County, early Virginia and Jaeger style rifles. This new double set trigger by L&R has a higher front trigger blade, a longer travel ramp to accommodate a wider range of adjustment, back lash adjustment screw. The front trigger has a decorative f       TR-LR-1910 . . . $75.00

Bedford County Double Lever , with backlash adjustment screw, by L&R Assembled with petite triggers in the style of John Amos, Bedford County, Pennsylvania. The curved trigger plate on these double lever double set triggers is designed to fit our precision inlet Bedford County rifle stock. They make a fine choice, if you are building a rifle with a profile requiring a curved trigger plate. The trigger plate is about       TR-LR-BEDFORD . . . $75.00

Hawken Double Set Trigger, designed by Ron Long The famous lock maker, Ron Long of Denver, designed this trigger for the Hawken rifle. Made by R. E. Davis, each trigger bears his (D) touch-mark. This double lever trigger has the required backlash to allow the lock to be cocked and fired, while the trigger is set or unset. We stock all spare parts. They also work on similar triggers by Allan or G       TR-PA-20 . . . $95.00

Used Thompson Center Hawken stock , cut for 1" barrel channel, walnut This used Thompson Center Hawken stock has a 1" barrel channel, Stock is cut for the buttplate, triggerplate, triggerguard, lock, forend cap, and escutcheons. This used stock is from a kit gun and still has some excess wood. A good serviceable T/C stock. We have only this one used example.       AAV-840 . . . $120.00 Closeout

Colt 1851 Navy Revolver , .36 caliber, 7-1/2" barrel, percussion, blued, walnut, new, in factory box, by A. Uberti Known as the Colt Model 1851 Navy Revolver , the term "Navy" indicates that it is .36 caliber. In all actuality, the U. S. Army bought more of the 1851 Navy Model revolvers than the U. S. Navy purchased. Notice the color case hardened steel frame. Unlike less costly revolvers made with a brass frame, this revolver has the rugged steel frame, and wi       AAW-598 . . . $349.00

Relic ~ Antique Halfstock Fowler , 14 gauge, 46" octagon-to-round barrel, percussion, walnut, brass, cracks, decorator use This antique halfstock rifle is in relic condition with multiple drying cracks in the walnut stock. The percussion back action lock and barrel are heavily rusted. The 14 gauge 46" barrel has a rough dark bore and the barrel rib is loose on both ends. The nose cap is missing. Sold as-is for decorator use. This guns is long enough it must be shipped       AAW-616 . . .

Relic ~ Antique Halfstock Rifle , .38 caliber, 39" barrel, percussion, maple, brass, cracks, non-functional, decorator use This antique halfstock rifle is in relic condition with cracks in the maple stock and a zip-tie retaining the barrel to the forearm. The percussion back action lock is missing the mainspring and is non-functional. The .38 caliber 39" barrel has a rough dark bore and the barrel has a dark brown textured patina. The stock is cracked all the way throu       AAW-617 . . . $49.99

Relic ~ Antique Halfstock Rifle , .50 caliber, 31-1/2" barrel, percussion, maple, brass, cracks, tape residue, signed JJ Mewhinter, decorator use This antique halfstock rifle is in relic condition with cracks in the maple stock as well as tape residue around the forearm. The percussion lock does not hold full cock, and the hammer is a replacement from a Spanish pistol. The .50 caliber 31-1/2" barrel has a rough dark bore and the barrel exterior was scrubbed with steel wool. The breech appear       AAW-618 . . .

has been added to your .

---