Pack of 12 English Gun flints , 1-1/8 x 1-1/4", Brown Bess, Grice, Tower, Springfield. We are temporarily limiting purchase of this item to one twelve pack per order. We will manually edit your order if your order exceeds that amount. Military muskets often work best with this size flint. Try this size in your Grice, Stowe, or Tower marked Brown Bess. Many original military locks such as the Springfield 1816 and later variations work best with this size. Pull your gun to half cock. Check and see if it will clear the 1-1/8" width and 1-1/4" length? The finest natural flint occurs       FLINT-ENG-9-PACK-12 . . . $42.00

Investarm Great Plains Rifle , .50 caliber, 32" barrel, 1 in 60" twist for round ball, right hand, percussion, factory new in-the-box, unfired The Plains Rifle was carried across the Great Plains, by western pioneers and fur trappers. It was the culmination of years of firearms development. The Investarms Great Plains Rifle is similar to rifles built by the famous Saint Louis rifle makers, Samuel Hawken, Gemmer, and Horace E. Dimick to the meet the demands of experienced backwoodsmen. St       INV-GPR-50-P-R . . . $679.00

Investarms Great Plains Rifle Kit , .50 caliber, 32" barrel, right hand, percussion, new, unfired The Plains Rifle was carried across the Great Plains, by western pioneers and fur trappers. It was the culmination of years of firearms development. The Investarms Great Plains Rifle is similar to rifles built by the famous Saint Louis rifle makers, Samuel Hawken, Gemmer, and Horace E. Dimick to the meet the demands of experienced backwoodsmen. Th       INV-GPR-50-P-R-K . . . $569.00

Investarm Great Plains Rifle , .54 caliber, 32" barrel, 1 in 60" twist for round ball, right hand, percussion, factory new in-the-box, unfired The Plains Rifle was carried across the Great Plains, by western pioneers and fur trappers. It was the culmination of years of firearms development. The Investarms Great Plains Rifle is similar to rifles built by the famous Saint Louis rifle makers, Samuel Hawken, Gemmer, and Horace E. Dimick to the meet the demands of experienced backwoodsmen. St       INV-GPR-54-P-R . . . $679.00

Hawken 15/16" slant faced breech & tang, 5/8-18 thread, by L&R This cleverly designed slant faced plug and tang by L&R Lock Co. is threaded 5/8-18 with .650" thread journal length, and .500" thread engagement for strength. The powder chamber is .315" diameter, ending in a large flash channel which is gently angled to the nipple seat. Most important, the plug and tang mating surfaces are machined flat, for a s       PLUG-LR-15-5 . . . $110.00

Hawken 1" slant faced breech & tang, 3/4-16 thread, by L&R This cleverly designed slant faced plug and tang by L&R Lock Co. is threaded 3/4-16 with .690" thread journal length, and .500" thread engagement for strength. The powder chamber is .375" diameter, ending in a large flash channel which is gently angled to the nipple seat. Most important, the plug and tang mating surfaces are machined flat, for a s       PLUG-LR-16-3 . . . $110.00

Sideplate for a French Fusil , wax cast brass Engraving is cast in. Bolt holes are about perfect for our French Type “C”, Type “D”, Tulle, L & R Trade Lock, Twigg, Early Ketland and similar flintlocks. Shorten the front for smaller locks. Matching triggerguard and buttplate are available. Wax cast in brass. Made in the USA. Overall length 5-7/16", height 1", thickness 0.070". This simple early       SP-FUSIL-A-B . . . $22.50

Sideplate for a French Fusil , iron (wax cast steel) Engraving is cast in. Bolt holes are about perfect for our French Type “C”, Type “D”, Tulle, L & R Trade Lock, Twigg, Early Ketland and similar flintlocks. Shorten the front for smaller locks. Matching triggerguard and buttplate are available. Wax cast steel. Made in the USA. Overall length 5-7/16", height 1", thickness 0.070". This simple early si       SP-FUSIL-A-I . . . $17.99

Sideplate for Bucks County longrifles, wax cast brass The pointed tail, beveled edges, and a molding at front and tail are similar to the sideplate attributed a Bucks County rifle by John Shuler. Pre cast holes will need to be drilled for clearance to accept a 8-32 or 10-32 lock bolt. Counter-bored for lock bolts with 3/8" flat or round head. Holes spaced for right hand L&R's Classic lock series, #LOC       SP-LR-21-B . . . $21.59

Sideplate for Bucks County longrifles, iron The pointed tail, beveled edges, and a molding at front and tail are similar to the sideplate attributed a Bucks County rifle by John Shuler. Pre cast holes will need to be drilled for clearance to accept a 8-32 or 10-32 lock bolt. Counter-bored for lock bolts with 3/8" flat or round head. Holes spaced for right hand L&R's Classic lock series, #LOC       SP-LR-21-I . . . $17.59

Sideplate for Bucks County longrifles, wax cast nickel silver The pointed tail, beveled edges, and a molding at front and tail are similar to the sideplate attributed a Bucks County rifle by John Shuler. Pre cast holes will need to be drilled for clearance to accept a 8-32 or 10-32 lock bolt. Counter-bored for lock bolts with 3/8" flat or round head. Holes spaced for right hand L&R's Classic lock series, #LOC       SP-LR-21-S . . . $21.59 Closeout

Serpent sideplate , for a North West Trade Gun , wax cast brass This highly detailed serpent sideplate was moulded directly from an original North West Trade Gun sideplate. Undrilled, the hole pads are slightly elongated to allow 3.2 to 3.5" lock bolt hole spacing, for locks as small as our Chambers' Fowling Gun flint lock, Tryon Trade Gun lock, or the large Brown Bess Musket lock. We recommend about 3.2" hole       SP-NW-2-B . . . $21.59

Sideplate for a Tennessee Longrifle , brass Tennessee rifles date from the late flint period, through the percussion period. Often trimmed in iron, sometimes in brass, these rifles usually feature fine imported locks, double set triggers and figured curly maple stocks. Many have primitive hand forged furniture and long tangs. Poor boy style rifles may omit the buttplate, entry pipe and muzzl       SP-TN-3-B . . . $6.99 Closeout

Sideplate for a Tennessee Longrifle , iron Tennessee rifles date from the late flint period, through the percussion period. Often trimmed in iron, sometimes in brass, these rifles usually feature fine imported locks, double set triggers and figured curly maple stocks. Many have primitive hand forged furniture and long tangs. Poor boy style rifles may omit the buttplate, entry pipe and muzzl       SP-TN-3-I . . . $6.99

Sideplate for a French TULLE Fusil-de-Chasse , iron (steel) French sideplate, flat, for a Tulle fusil-de-chasse, French Marine fusil, or French musket. Use our 1/2" diameter dome head 8-32 or 10-32 lock bolts. The lock bolt holes are on 3 inch centers, for use with our Tulle fusil lock, fowling gun lock, and similar medium large flint locks. Inlet this sideplate flush with the side panel. This nice sideplat       SP-TULLE-2-I . . . $6.99

Allentown-Bethlehem pre shaped, non-inlet stocks, 13/16", 7/8", or 15/16" octagon 42" barrel This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Offered in three barrel channel sizes, 13/16", 7/8", or 15/16" straight octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the

Stock, Allentown-Bethlehem , pre shaped, 13/16" octagon 42" barrel, non-inlet , plain maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 13/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-13-M1 . . . $179.00

Stock, Allentown-Bethlehem , pre shaped, 13/16" octagon 42" barrel, non-inlet , semi-fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 13/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-13-M2 . . . $199.00

Stock, Allentown-Bethlehem , pre shaped, 13/16" octagon 42" barrel, non-inlet , fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 13/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-13-M3 . . . $269.00

Stock, Allentown-Bethlehem , pre shaped, 13/16" octagon 42" barrel, non-inlet , extra fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 13/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-13-M4 . . . $339.00

Stock, Allentown-Bethlehem , pre shaped, 7/8" octagon 42" barrel, non-inlet , plain maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 7/8" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x 1       STK-AB-14-M1 . . . $179.00

Stock, Allentown-Bethlehem , pre shaped, 7/8" octagon 42" barrel, non-inlet , semi-fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 7/8" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x 1       STK-AB-14-M2 . . . $199.00

Stock, Allentown-Bethlehem , pre shaped, 7/8" octagon 42" barrel, non-inlet , fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 7/8" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x 1       STK-AB-14-M3 . . . $269.00

Stock, Allentown-Bethlehem , pre shaped, 7/8" octagon 42" barrel, non-inlet , extra fancy maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 7/8" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x 1       STK-AB-14-M4 . . . $339.00

Stock, Allentown-Bethlehem , pre shaped, 15/16" octagon 42" barrel, non-inlet , plain maple This gently curved stock is modeled after those made in Allentown-Bethlehem, Pennsylvania. This stock style is also similar to those made by A. Verner, of Buck's County, Pennsylvania. Only cut for a 15/16" octagon 42" barrel, 3/8" ramrod hole drilled full depth. Up to 15" pull, 4-1/4" drop from the line of sights to heel. Butt end is about 5-1/4" x       STK-AB-15-M1 . . . $179.00

has been added to your .

---