Double Set Trigger
curled long bar rear trigger
Part Number: TR-DST-GA
Availability: In Stock
Price: $69.00
Order Quantity:
This "double lever" set trigger has a front trigger lever to engage the sear, so the lock can be fired with the trigger unset when properly tuned. The photo shows this trigger in the "set" position. The photo shows the maximum spacing of the two triggers. Although the rear trigger is gently curled, this trigger can be used with a medium size triggerguard bow. The trigger plate is about .400" wide. Neatly finished, this trigger has just enough backlash or "free-play" to allow the lock to be cocked, before the trigger is set. Shortening the mainspring's tip will increase free-play, if necessary. Your lock must have a "fly" detent in half cock. We can supply spare parts for this trigger. Available as a kit, or assembled, tuned, ready for use.

This trigger is a precision assembly made with heat treated tool steel. If either trigger must be bent to fit the triggerguard, heat the trigger to a cherry red and bend while hot. Reharden by heating to cherry red and quenching in 10W oil or mineral oil. Temper by heating to 550 degrees for 1 hour in a kitchen oven. The trigger bar can be bent slightly without heating.


Overall length 5-1/2", width .400".
Adobe Reader required to view the files below.
Get Adobe Reader
page_348.pdf Last updated:4/25/2012 (93 KB)
Steel Dowel Pin, 3/32" diameter, 1-1/2", hardened, for lug, pipe, guard, or trigger pivot pin
Steel Dowel Pin, 3/32" diameter, 1-1/2", hardened, for lug, pipe, guard, or trigger pivot pin
Part Number: PIN-3-32
Availability: In Stock
Price: $0.60
Order Quantity:
Trigger mainspring, tempered steel, fits several double set triggers
Trigger mainspring, tempered steel, fits several double set triggers
Part Number: TR-DST-1-MS
Availability: In Stock
Price: $15.99
Order Quantity:
Trigger mainspring screw, 3/8", 6-40 thread, fits several double set triggers
Trigger mainspring screw, 3/8", 6-40 thread, fits several double set triggers
Part Number: TR-DST-1-MSX
Availability: In Stock
Price: $2.59
Order Quantity:
Trigger adjustment screw, 3-48 thread, fits several double set triggers
Trigger adjustment screw, 3-48 thread, fits several double set triggers
Part Number: TR-DST-1-TAX
Availability: In Stock
Price: $1.99
Order Quantity:
Trigger, front, tempered steel, for #TR-DST-6 double set triggers
Trigger, front, tempered steel, for #TR-DST-6 double set triggers
Part Number: TR-DST-6-FT
Availability: In Stock
Price: $16.99
Order Quantity:
Front trigger spring, tempered steel, fits several double set triggers
Front trigger spring, tempered steel, fits several double set triggers
Part Number: TR-DST-6-FTS
Availability: In Stock
Price: $5.99
Order Quantity:
Trigger plate, for DST-6 trigger, as cast, plate only, .400" wide
Trigger plate, for DST-6 trigger, as cast, plate only, .400" wide
Part Number: TR-DST-6-PL
Availability: In Stock
Price: $17.59
Order Quantity:
trigger, rear, tempered steel, for #TR-DST-GA double set triggers
trigger, rear, tempered steel, for #TR-DST-GA double set triggers
Part Number: TR-DST-GA-RT
Availability: In Stock
Price: $16.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2024Track of the Wolf, Inc.
Accepted Credit Cards