English Bar Lock left Percussion Lock, with early flat hammer, by L&R
Part Number: LOCK-LR-600
Availability: In Stock
Price: $120.00
Order Quantity:
English Bar left Percussion Lock, with early flat hammer

The English “bar” lock is so-called because it uses a “drip bar” soldered to the barrel, instead of wood above the lock plate. This improvement eliminates wood in this critical area ahead of the nipple, where constant over-spray might char it.

Most better London & Birmingham makers used “bar” locks, as did such famous American makers as H. E. Dimick of St. Louis. The bar lock was used on half stock rifles. When used in pairs on double guns, barrels overhang the plates, to eliminate the filler bars.

We offer the right drip bar only. Matching right and left bars can be made from two right bars.

Other features include a fly, and mainspring link with integral pins, which pivots to lift out of the tumbler, a fine English feature.
The hammer has a long 1.745” throw for use with barrels from
15/16” up to 1-1/4” at breech. Our left “bar” locks exactly match our right locks. In lieu of a front bolt, a lug can be added inside the plate, to hook under a hidden wood screw head, set in the lock mortise.

Since the internal parts are used in other L&R locks, the other styles of hammers may be fitted to these locks. The Hawken, Leman, and English hammers are misnomers, as all these are really English designs. We use these names for clarity, since these hammer shapes are well known from those locks. Our matching hammers, locks and parts may be used to repair or replicate old rifles and shotguns.

This lock exactly matches our right hand English bar lock.

This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
Adobe Reader required to view the files below.
Get Adobe Reader
page_187.pdf Last updated:4/25/2012 (103.63 KB)
Bridle screw, 6-40 thread
Bridle screw, 6-40 thread
Part Number: LOCK-LR-100-BX
Availability: In Stock
Price: $2.00
Order Quantity:
Fly detent, steel, tempered, with hole for pivot
Fly detent, steel, tempered, with hole for pivot
Part Number: LOCK-LR-100-FL
Availability: In Stock
Price: $3.25
Order Quantity:
Stirrup link, wax cast steel, tempered, integral pins
Stirrup link, wax cast steel, tempered, integral pins
Part Number: LOCK-LR-100-LI
Availability: In Stock
Price: $9.75
Order Quantity:
Sear spring screw, 6-40 thread
Sear spring screw, 6-40 thread
Part Number: LOCK-LR-100-SSX
Availability: In Stock
Price: $2.00
Order Quantity:
Sear screw, .60" length, 6-40 thread
Sear screw, .60" length, 6-40 thread
Part Number: LOCK-LR-100-SX
Availability: In Stock
Price: $2.00
Order Quantity:
Tumbler screw, .400" head diameter, 6-40 thread
Tumbler screw, .400" head diameter, 6-40 thread
Part Number: LOCK-LR-100-TX
Availability: In Stock
Price: $3.75
Order Quantity:
bridle, left, wax cast steel, use 6-40 screws
bridle, left, wax cast steel, use 6-40 screws
Part Number: LOCK-LR-200-BR
Availability: Item is currently sold out.
Price: $18.00
Order Quantity:
  
Mainspring, left, tempered steel, tempered
Mainspring, left, tempered steel, tempered
Part Number: LOCK-LR-200-MS
Availability: In Stock
Price: $27.00
Order Quantity:
sear, left, wax cast steel, tempered, use 6-40 screw
sear, left, wax cast steel, tempered, use 6-40 screw
Part Number: LOCK-LR-200-SE
Availability: In Stock
Price: $18.00
Order Quantity:
sear spring, left, die formed steel, tempered
sear spring, left, die formed steel, tempered
Part Number: LOCK-LR-200-SS
Availability: In Stock
Price: $4.25
Order Quantity:
tumbler, left, wax cast steel, tempered, tapped 6-40
tumbler, left, wax cast steel, tempered, tapped 6-40
Part Number: LOCK-LR-200-TU
Availability: In Stock
Price: $26.00
Order Quantity:
hammer, left, wax cast steel, 1.745" throw
hammer, left, wax cast steel, 1.745" throw
Part Number: LOCK-LR-600-HA
Availability: In Stock
Price: $18.50
Order Quantity:
plate, wax cast steel, 5.17" x 1.06", tapped 6-40
plate, wax cast steel, 5.17" x 1.06", tapped 6-40
Part Number: LOCK-LR-600-PL
Availability: In Stock
Price: $32.00
Order Quantity:
Mainspring Vise,
to safely compress a mainspring
Mainspring Vise, to safely compress a mainspring
Part Number: TOOL-VISE
Availability: In Stock
Price: $15.99
Order Quantity:
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
Mainspring Vise, deluxe English style, for safely compressing a mainspring, made in the U.S.A.
Part Number: TOOL-VISE-DX
Availability: In Stock
Price: $29.99
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards