S. Hawken right hand, percussion lock, by L&R

Home > Gun Parts > Locks > Locks

S. Hawken right hand, percussion lock, by L&R

Part Number:	LOCK-LR-100
Availability:
Price:	$160.00
Order Quantity:

Sam Hawken and other makers used these locks on Plains rifles, Ohio rifles and late longrifles, during the later percussion era of 1845 to 1885. Thomas Gibbons of St. Louis made and signed many locks. Note the square inside corner at the front of the lock plate, and the normal narrow percussion hammer, both late features.

Fitted with a fly detent for use with set triggers. A swivel link with integral pins hooks into the cut-away tumbler arm, to allow simple disassembly. Beware: the link must not be installed backwards, or the link and mainspring will be broken on first use. The small diameter pin hooks into cut-away tumbler arm, and “S” orientation allows essential mainspring clearance. Don’t break it! Plate is finished bright inside and out. Cut the plate for the drum or patent breech. Fit a thin card pattern to the breech, trace it to the lock plate, file to fit. It is easier than it sounds. The hammer has a 1.625” throw, for use with octagon barrels from 13/16” to 1-1/8” at the breech. This right hand S. Hawken cap lock exactly matches our left hand lock LOCK-LR-200, for use on double rifles.

This lock exactly matches our left hand Sam Hawkenpercussion lock.

This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.

Adobe Reader required to view the files below.

page_183.pdf Last updated:4/25/2012 (96 KB)

page_190.pdf Last updated:4/25/2012 (100 KB)

page_213.pdf Last updated:4/25/2012 (70 KB)

Bridle, wax cast steel, tempered, use 6-40 screws

Part Number:	LOCK-LR-100-BR
Availability:
Price:	$24.00
Order Quantity:

Bridle screw, 6-40 thread

Part Number:	LOCK-LR-100-BX
Availability:
Price:	$3.29
Order Quantity:

Fly detent, steel, tempered, with hole for pivot

Part Number:	LOCK-LR-100-FL
Availability:
Price:	$5.00
Order Quantity:

Hammer, right, wax cast steel, 1.75" throw

Part Number:	LOCK-LR-100-HA
Availability:
Price:	$25.50
Order Quantity:

Stirrup link, wax cast steel, tempered, integral pins

Part Number:	LOCK-LR-100-LI
Availability:
Price:	$13.50
Order Quantity:

Mainspring, wax cast steel, tempered

Part Number:	LOCK-LR-100-MS
Availability:
Price:	$29.99
Order Quantity:

Lock plate, 4.8 x 1.0", drilled & tapped

Part Number:	LOCK-LR-100-PL
Availability:
Price:	$45.00
Order Quantity:

Sear, wax cast steel, tempered, use 6-40 screw

Part Number:	LOCK-LR-100-SE
Availability:
Price:	$24.00
Order Quantity:

Sear spring, die formed steel, tempered

Part Number:	LOCK-LR-100-SS
Availability:
Price:	$6.00
Order Quantity:

Sear spring screw, 6-40 thread

Part Number:	LOCK-LR-100-SSX
Availability:
Price:	$3.29
Order Quantity:

Sear screw, .59" length, 6-40 thread

Part Number:	LOCK-LR-100-SX
Availability:
Price:	$3.29
Order Quantity:

Tumbler, wax cast steel, tempered, cut for fly, tapped 6-40

Part Number:	LOCK-LR-100-TU
Availability:
Price:	$34.50
Order Quantity:

Tumbler screw, .400" head diameter, 6-40 thread

Part Number:	LOCK-LR-100-TX
Availability:
Price:	$5.25
Order Quantity:

Mainspring Vise, to safely compress a mainspring

Part Number:	TOOL-VISE
Availability:
Price:	$19.99
Order Quantity:

Mainspring Vise, deluxe English style, for safely compressing a mainspring, made in the U.S.A.

Part Number:	TOOL-VISE-DX
Availability:
Price:	$35.99
Order Quantity:

Top of Page Home > Gun Parts > Locks > Locks