S. Hawken left hand, percussion lock, by L&R
Part Number: LOCK-LR-200
Availability: In Stock
Price: $120.00
Order Quantity:
Sam Hawken and other makers used these locks on Plains rifles, Ohio rifles and late longrifles, during the later percussion era of 1845 to 1885. Thomas Gibbons of St. Louis made and signed many locks.

Note the square inside corner at the front of the lock plate, and the normal narrow percussion hammer, both late features.

Fitted with a fly detent for use with set triggers. A swivel link with integral pins hooks into the cut-away tumbler arm, to allow simple disassembly. Beware: the link must not be installed backwards, or the link and mainspring will be broken on first use. The small diameter pin hooks into cut-away tumbler arm, and “S” orientation allows essential mainspring clearance. Don’t break it! Plate is finished bright inside and out. Cut the plate for the drum or patent breech. Fit a thin card pattern to the breech, trace it to the lock plate, file to fit. It is easier than it sounds. The hammer has a 1.625” throw, for use with octagon barrels from 13/16” to 1-1/8” at the breech. This left hand S. Hawken cap lock exactly matches our right hand lock, for use on double rifles.

This lock exactly matches our right hand Sam Hawkenpercussion lock.

This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
Adobe Reader required to view the files below.
Get Adobe Reader
page_183.pdf Last updated:4/25/2012 (96.22 KB)
Bridle screw, 6-40 thread
Bridle screw, 6-40 thread
Part Number: LOCK-LR-100-BX
Availability: In Stock
Price: $2.00
Order Quantity:
Fly detent, steel, tempered, with hole for pivot
Fly detent, steel, tempered, with hole for pivot
Part Number: LOCK-LR-100-FL
Availability: In Stock
Price: $3.25
Order Quantity:
Stirrup link, wax cast steel, tempered, integral pins
Stirrup link, wax cast steel, tempered, integral pins
Part Number: LOCK-LR-100-LI
Availability: In Stock
Price: $9.75
Order Quantity:
Sear spring screw, 6-40 thread
Sear spring screw, 6-40 thread
Part Number: LOCK-LR-100-SSX
Availability: In Stock
Price: $2.00
Order Quantity:
Sear screw, .60" length, 6-40 thread
Sear screw, .60" length, 6-40 thread
Part Number: LOCK-LR-100-SX
Availability: In Stock
Price: $2.00
Order Quantity:
Tumbler screw, .400" head diameter, 6-40 thread
Tumbler screw, .400" head diameter, 6-40 thread
Part Number: LOCK-LR-100-TX
Availability: In Stock
Price: $3.75
Order Quantity:
bridle, left, wax cast steel, use 6-40 screws
bridle, left, wax cast steel, use 6-40 screws
Part Number: LOCK-LR-200-BR
Availability: Item is currently sold out.
Price: $18.00
Order Quantity:
  
hammer, left, wax cast steel, 1.745" throw
hammer, left, wax cast steel, 1.745" throw
Part Number: LOCK-LR-200-HA
Availability: In Stock
Price: $18.50
Order Quantity:
Mainspring, left, tempered steel, tempered
Mainspring, left, tempered steel, tempered
Part Number: LOCK-LR-200-MS
Availability: In Stock
Price: $27.00
Order Quantity:
lock plate, 4.8 x 1.0", drilled & tapped, left hand
lock plate, 4.8 x 1.0", drilled & tapped, left hand
Part Number: LOCK-LR-200-PL
Availability: In Stock
Price: $32.00
Order Quantity:
sear, left, wax cast steel, tempered, use 6-40 screw
sear, left, wax cast steel, tempered, use 6-40 screw
Part Number: LOCK-LR-200-SE
Availability: In Stock
Price: $18.00
Order Quantity:
sear spring, left, die formed steel, tempered
sear spring, left, die formed steel, tempered
Part Number: LOCK-LR-200-SS
Availability: In Stock
Price: $4.25
Order Quantity:
tumbler, left, wax cast steel, tempered, tapped 6-40
tumbler, left, wax cast steel, tempered, tapped 6-40
Part Number: LOCK-LR-200-TU
Availability: In Stock
Price: $26.00
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Mainspring Vise,
to safely compress a mainspring
Mainspring Vise, to safely compress a mainspring
Part Number: TOOL-VISE
Availability: In Stock
Price: $15.99
Order Quantity:
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
Mainspring Vise, deluxe English style, for safely compressing a mainspring, made in the U.S.A.
Part Number: TOOL-VISE-DX
Availability: In Stock
Price: $29.99
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards