Ramrod pipe, iron, forward pipe, plain for rib, round, for 3/8" ramrod. The body is 1-1/4" length overall. Turned steel.
Made for a halfstock rifle (with steel underrib extending to muzzle), most rifles use two forward pipes, and a few extra long rifles use three forward pipes.
When mounting to a halfstock rifle, file a flat on the pipe, and a matching flat in the rib. Cut the rib flat deep enough to allow the ramrod to slide smoothly down the inside of the rib, and through the pipe. Tin both flats with solder, cool, clamp in place, and re-heat to "sweat solder" the two flats together. Wipe off excess solder, using steel wool, while molten.
We recommend using our #SOLDER-SB Stay-Brite extra strong solder and flux.
Made for a halfstock rifle (with steel underrib extending to muzzle), most rifles use two forward pipes, and a few extra long rifles use three forward pipes.
When mounting to a halfstock rifle, file a flat on the pipe, and a matching flat in the rib. Cut the rib flat deep enough to allow the ramrod to slide smoothly down the inside of the rib, and through the pipe. Tin both flats with solder, cool, clamp in place, and re-heat to "sweat solder" the two flats together. Wipe off excess solder, using steel wool, while molten.
We recommend using our #SOLDER-SB Stay-Brite extra strong solder and flux.
Adobe Reader required to view the files below.
page_232.pdf
Last updated: 4/25/2012 (154 KB)