Jaeger Ramrod Pipes,
bulbous, for 3/8" rod,
wax cast brass or iron
Shown in side view, and top view, these ramrod pipes are round with bulbous rings, for 3/8" ramrod, in your choice of brass or iron (steel), for fullstock or halfstock.
Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-1/2" length, about 3-1/4" overall, including the skirt. Your choice of wax cast brass or steel. Use our #PIN-3/32" steel dowel pin for mounting the entry pipe on a fullstock rifle.
Our forward pipe, with lug for pin, is 1-1/2" overall length. Made for a fullstock rifle (with wood extending to muzzle), most rifles use two forward pipes. A few extra long rifles use three forward pipes. Use one, or sometimes two #PIN-3/32 steel dowel pins, to retain a brass or iron pipe.
Fullstock rifles, with wood to the muzzle, require one entry pipe, and two forward pipes with pin lugs. Order three mounting pins. Extra long fullstock rifles may use three forward pipes.
Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-1/2" length, about 3-1/4" overall, including the skirt. Your choice of wax cast brass or steel. Use our #PIN-3/32" steel dowel pin for mounting the entry pipe on a fullstock rifle.
Our forward pipe, with lug for pin, is 1-1/2" overall length. Made for a fullstock rifle (with wood extending to muzzle), most rifles use two forward pipes. A few extra long rifles use three forward pipes. Use one, or sometimes two #PIN-3/32 steel dowel pins, to retain a brass or iron pipe.
Fullstock rifles, with wood to the muzzle, require one entry pipe, and two forward pipes with pin lugs. Order three mounting pins. Extra long fullstock rifles may use three forward pipes.
DRILL-3/32
drill bit, HSS, 3/32", .0938" diameter, drill for 3/32" pins
PIN-3-32
Steel Dowel Pin, 3/32" diameter, 1-1/4", hardened, for lug, pipe, guard, or trigger pivot pin
RP-JAEG-E-6-B
Ramrod pipe, brass, entry pipe with skirt, bulbous, for 3/8" ramrod (about .355" ID).
RP-JAEG-E-6-I
Ramrod pipe, steel, entry pipe with skirt, bulbous, for 3/8" ramrod
RP-JAEG-F-6-B
Ramrod pipe, brass, forward with pin lug, bulbous, for 3/8" ramrod
RP-JAEG-F-6-I
Ramrod pipe, steel, forward with pin lug, bulbous, for 3/8" ramrod
