The sheep Skinner Blade, is a authentic early skinner. Features a 5-1/4" blade, with a 9-3/4" overall length. Forged from .138" thick carbon cutlery steel, properly tempered to sharpen quickly and hold an edge.
This blade has a 5-1/4" edge, correctly forged from .138" thick carbon cutlery steel, not modern stainless steel.
Not an imported copy, this American knife is made in the U.S.A. by America's oldest cutlery. John Russell's Green River Works began operation around 1832 to 1834, and is mentioned in Complete Black Powder Handbook by Sam Fadala.
We recommend three (3) #RIVET-5 brass rivets. Use our Piloted Counterbore to seat the rivet heads flush with the surface. Order our #DRILL-PCB-5.
This blade has a 5-1/4" edge, correctly forged from .138" thick carbon cutlery steel, not modern stainless steel.
Not an imported copy, this American knife is made in the U.S.A. by America's oldest cutlery. John Russell's Green River Works began operation around 1832 to 1834, and is mentioned in Complete Black Powder Handbook by Sam Fadala.
We recommend three (3) #RIVET-5 brass rivets. Use our Piloted Counterbore to seat the rivet heads flush with the surface. Order our #DRILL-PCB-5.
BOOK-BKA
Basic Knife Assembly,
19 page color pamphlet,
by Ryan & Roger Gale
DRILL-21
drill bit, HSS, Number 21, .1590" diameter, tap drill 10-32 thread
DRILL-PCB-5
Piloted Counter Bore,
5/16" diameter, No. 21 pilot,
for wood, bone, or similar materials,
ideal for use with our cutler's rivets
KP-BONE-S
Bleached bone knife handle scales,
two scales
1/4" x 1-1/4" x 5"
KP-CHERRY-S
Cherry knife handle scales,
two scales
3/8" x 1-1/2" x 5"
KP-MAPLE-S
Curly maple knife handle scales,
two scales
3/8" x 1-1/2" x 5"
KP-WALNUT-S
American black walnut knife handle scales,
two scales
3/8" x 1-1/2" x 5"
RIVET-5
Cutler's Rivet, brass, single,
one male and one female part.
Use our #DRILL-PCB-5 piloted counter bore
to seat the rivet heads flush.
Adobe Reader required to view the files below.
page_076.pdf
Last updated: 4/25/2012 (114 KB)