U. S. Model 1873 Officer's Rifle,
caliber .45-70 Government, 26" barrel,
walnut, iron, beach's front sight, tang sight,
used, by Harrington & Richardson
This American made replica trapdoor Springfield Officer's Rifle was manufactured during the 1973 centennial of the original 1873 rifle, designed by the famous Erskine S. Allin, master of the Springfield Armoury. Apparently Springfield Armoury disliked making special hand finished guns for officers, but they were ordered to provide this service. Several were sold, despite the high cost for the period. Originals are very rare and valuable. This handsome replica is offered in used condition. The factory front sight has been replaced with beach's front sight. The breech end of the barrel has been drilled and tapped with two holes for a rear sight. This rifle qualifies for FFL transfer and can be picked up by a Minnesota resident, or it must be shipped to a FFL dealer in another state.
This rifle includes:
The 26" barrel is chambered for the .45-70 Government cartridge. The barrel is finished to a dark blue and has a few small marks. The top of the barrel was drilled and tapped with two holes for a sight and filler screws were installed. The blue around the holes has a silvery gray halo. No rear sight has been fitted to the barrel, instead the rifle makes use of a special wrist mounted tang sight. The bore is bright and has been well maintained. The front sight is a beach's style that flips between a blade and a globe sight. This fine rifle includes a checkered wrist and forend, and engraved triggerguard. A engraved pewter nosecap protects the end grain of the stock. A civilian style wooden ramrod or cleaning rod, passes through the forend cap. The stock is marked with a period style inspector's mark located behind the checkered wrist.
Notice the brilliant color case hardening pattern on the lock and trapdoor action. Another special feature of this Officer's rifle is the long range tang sight, said to be the design of the famous marksman, Freeman R. Bull, born 1833. He was employed by Springfield Armoury, and he began his shooting career in 1867. Easily adjusted, this style tang sight with rounded top is shown in The 45-70 Springfield, Book II, 1865 - 1893, by Albert J. Frasca, Ph.D. Simple to operate, this tang sight features both sliding elevation and sliding windage, locked securely by turning the knurled eye disk. The two lock bolts are neatly fitted with slots aligned to individual sideplates. The wrist is checkered to provide a secure grip.
Mr. Bull organized the state team that won state and national matches. In 1889 his team traveled to England to win the International Match, and $1,000.00 prize. Imagine the value of a $1,000.00 prize, back in the year 1889. Mr. Bull worked at Springfield Armoury for 51 years. While many shooters on his team used Remington rolling block rifles, and others used 1874 Sharps rifles, Bull used his trapdoor Springfield to defend the honor of the United States in the famous International matches against the English and the Irish, at Creedmoor Range on Long Island, New York, and Wimbledon Range in England. Sadly, political intrigue and bad judgment ended such competition. The Creedmoor Range became a U. S. Army Insane Asylum, after the Army decided that marksmanship would not be important, because of machine guns.
We stock .45-70 dies, cases, and reloading equipment to fire this nice rifle. We enjoy casting bullets, hand loading black powder cartridges, and enjoyable afternoons at our local 100, 200, and 400 yard range. We strongly prefer black powder handloads for use with this sporting rifle and have had good success firing similar models. We recommend cast lead alloy bullets, sized to fit the grooves, with SPG lubricant, over our thin card wad. You can easily assemble your own cartridges using our inexpensive reloading tools and molds.
This is a used example of a Harrington & Richardson Trapdoor Officer's Model. This handsome replica is offered in used condition. This rifle qualifies for FFL transfer and can be picked up by a Minnesota resident, or it must be shipped to a FFL dealer in another state. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
This rifle includes:
- An antique 1873 Trapdoor Springfield Rifle sight with screws in excellent condition with a high amount of antique blue finish.
- A Davide Pedersoli Beach's Front Sight with blued steel base and brass globe.
The 26" barrel is chambered for the .45-70 Government cartridge. The barrel is finished to a dark blue and has a few small marks. The top of the barrel was drilled and tapped with two holes for a sight and filler screws were installed. The blue around the holes has a silvery gray halo. No rear sight has been fitted to the barrel, instead the rifle makes use of a special wrist mounted tang sight. The bore is bright and has been well maintained. The front sight is a beach's style that flips between a blade and a globe sight. This fine rifle includes a checkered wrist and forend, and engraved triggerguard. A engraved pewter nosecap protects the end grain of the stock. A civilian style wooden ramrod or cleaning rod, passes through the forend cap. The stock is marked with a period style inspector's mark located behind the checkered wrist.
Notice the brilliant color case hardening pattern on the lock and trapdoor action. Another special feature of this Officer's rifle is the long range tang sight, said to be the design of the famous marksman, Freeman R. Bull, born 1833. He was employed by Springfield Armoury, and he began his shooting career in 1867. Easily adjusted, this style tang sight with rounded top is shown in The 45-70 Springfield, Book II, 1865 - 1893, by Albert J. Frasca, Ph.D. Simple to operate, this tang sight features both sliding elevation and sliding windage, locked securely by turning the knurled eye disk. The two lock bolts are neatly fitted with slots aligned to individual sideplates. The wrist is checkered to provide a secure grip.
Mr. Bull organized the state team that won state and national matches. In 1889 his team traveled to England to win the International Match, and $1,000.00 prize. Imagine the value of a $1,000.00 prize, back in the year 1889. Mr. Bull worked at Springfield Armoury for 51 years. While many shooters on his team used Remington rolling block rifles, and others used 1874 Sharps rifles, Bull used his trapdoor Springfield to defend the honor of the United States in the famous International matches against the English and the Irish, at Creedmoor Range on Long Island, New York, and Wimbledon Range in England. Sadly, political intrigue and bad judgment ended such competition. The Creedmoor Range became a U. S. Army Insane Asylum, after the Army decided that marksmanship would not be important, because of machine guns.
We stock .45-70 dies, cases, and reloading equipment to fire this nice rifle. We enjoy casting bullets, hand loading black powder cartridges, and enjoyable afternoons at our local 100, 200, and 400 yard range. We strongly prefer black powder handloads for use with this sporting rifle and have had good success firing similar models. We recommend cast lead alloy bullets, sized to fit the grooves, with SPG lubricant, over our thin card wad. You can easily assemble your own cartridges using our inexpensive reloading tools and molds.
This is a used example of a Harrington & Richardson Trapdoor Officer's Model. This handsome replica is offered in used condition. This rifle qualifies for FFL transfer and can be picked up by a Minnesota resident, or it must be shipped to a FFL dealer in another state. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Ready for same day shipment on receipt of your funds, and your Federal Firearms Licensed dealer's signed FFL copy. We must deliver to a Minnesota resident, or to a licensed dealer in any other state.
Search for a FFL Transfer Dealer in your area.
U. S. Model 1873 Officer's Rifle,
caliber .45-70 Government, 26" barrel,
walnut, iron, beach's front sight, tang sight,
used, by Harrington & Richardson
Related Products Shown Below
SPG Black Powder Cartridge Reloading Primer,
revised 9th edition, 20 plus new pages
by Mike Venturino & Steve Garbe
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Bore brush, bronze, for .45 caliber, 10-32 thread
Neck Expander Plug,
.457" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug,
.458" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug,
.459" diameter,
to fit our
Lee 7/8-14 die
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
LEE Classic Cast Reloader Press,
for pistol or rifle cartridges
LEE Loading Dies,
caliber .45-70 Gov't,
including shell holder
LEE Neck Expander Die,
7/8-14 thread,
for our neck expander plugs
or powder compression plugs,
each sold separately
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
SPG Bullet Lubricant,
one 1-1/4 ounce stick, for Black or Smokeless Powder
Bullet Mold,
.457" diameter, 405 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Lyman Three Die Set,
for .45-70 Government
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Shell holder #17,
by Lyman,
fits .40-65 & .45-70 to .45-120
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
.45 caliber rifle Wool Wad,
bag of 100 dry felt wads
BOOK-SPG
SPG Black Powder Cartridge Reloading Primer,
revised 9th edition, 20 plus new pages
by Mike Venturino & Steve Garbe
CASE-45-70-PACK-050
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
50 pieces
LEE-90268
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
LEE-90374
Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity
LEE-DIE-45-EX
LEE Neck Expander Die,
7/8-14 thread,
for our neck expander plugs
or powder compression plugs,
each sold separately
LEE-HANDLE
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
LYMAN-457-193
Bullet Mold,
.457" diameter, 405 grain bullet mold,
single cavity steel mold blocks,
by Lyman
LYMAN-H-L
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
OX-CLEAN-45C
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber