The polished and blued barrels are 27" long, not including the breech plugs. The 12 gauge bores are cylinder bore on the right, which measures .725" at the muzzle, and a light modified choke on the left, which measures .710" at the muzzle. Both bores are mirror bright. The front sight is a standard brass bead in the center rib. On barrels with integral chokes your options for loading are wool wads, or traditional cards and wads. For loading traditional card wads through a choke, the card manufacturer recommends using a 12 gauge over powder card pushed through the choke sideways, so only two sides of the card are flattened. A smaller 14 gauge fiber wad is used. The thin over shot card can easily pass through a choke without any difficulty.
The straight grip is checkered, and the walnut stock is fitted with a blued steel buttplate. This wide buttplate is nearly flat, making it comfortable with full loads. The stock has only a few minor handling marks. The buttstock is fitted with a sling swivel stud, and the rear ramrod pipe has an integral stud. No sling is included. The long tang is color case hardened, and factory engraved to match the locks. The trigger plate is engraved and color case hardened, while the triggerguard with long grip rail is blued. The forend has a single key that retains the barrel. The key allows for quick disassembly for cleaning. Simply withdraw the ramrod, press out the key with firm thumb pressure, and lift the muzzle end, to dismount the barrels for easy cleaning. The ramrod is fitted with a brass shotgun style loading tip on one end and a brass tip with 10-32 threads for loading and cleaning accessories on the opposite end. No cheekpiece is carved, making this shotgun equally handy for right or left hand shooters.
The factory nipples have been replaced with hardened steel 1/4-28 nipples for musket caps. When cleaning at the end of the day remove the nipples, using our #NW-100 nipple wrench, and immerse the breech end in a bucket of hot soapy water. Place a wet cleaning patch on our #Ramrod-7-10-B cleaning rod, fitted with our #Jag-12-10 cleaning jag tip. Push the air out, and draw the water in, as you pump the ramrod the full length of each barrel, a few times. Change the water, and the patch. When the patch comes out clean, you are ready to wipe the bores dry, using a patch wetted with water displacing oil.
The Pedersoli shotgun locks are case colored and engraved with a floral pattern. Both locks are perfect inside, with strong springs, secure half-cock notches, and full cock notches that release smoothly with normal trigger finger pressure. Davide Pedersoli double shotguns use standard 1/4-28 nipples. Apply a tiny amount of Birchwood Casey's Choke Tube Lube, or any good anti-seize grease, to the nipple threads before installation. Hardened steel nipples for musket caps are fitted.
A great double barrel shotgun offered in excellent used condition. The bore are bright, clean, and ready to shoot on your next upland bird hunt. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.
Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.
Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.