This correct replica Colt Model 1860 Army revolver has a blue finished tapered round barrel, color case hardened frame, steel back-strap, brass triggerguard, reddish brown walnut grips, and color case hardened loading lever. Manufactured by Armi San Marco and marked below the loading lever. The revolver has marks on the cylinder from the latch, and the wedge has many marks from being drifted in and out to disassemble the revolver.

The frame and hammer are color case hardened. The cylinder and barrel are finished to a dark blue. The barrel is fitted with a brass front sight and the rear sight is a notch in the hammer to maximize the sight radius. The loading lever is color case hardened. The barrel is marked beneath the loading lever A.S.M. BLACK POWDER ONLY CAL.44 MADE IN ITALY. The brass triggerguard has aged to a mellow patina from long storage.

The factory recommends .451" round balls, and each chamber will hold 35 grains of FFFg powder. We recommend .454" balls, and 21 grains of GOEX FFFg powder, for best accuracy and best compression. Cover each ball with a small amount of our #LUBE-SPG bullet lubricant grease. Despite your best efforts, this revolver will need to be cleaned after 12 or 18 shots. Remove the wedge, barrel, and cylinder. Wipe the face of the cylinder, and wipe the cylinder pin. If you continue to load and fire a badly fouled revolver, the effort needed to cock and fire the gun will become greater, causing the small internal hand, spring, and cylinder latch to become worn and slightly damaged. Continued abuse will cause the cylinder and latch to become out-of-time. Simple cleaning and maintenance will prevent problems.

A used 1860 Colt revolver by Armi San Marco of Italy. This pistol will be a joy to shoot at the range. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.