This replica .31 caliber Remington Pocket Model Revolver has a blued steel frame, 3-1/2" octagon barrel, and walnut grips. The side flats of the barrel bear the maker's name, and Black Powder Only, .31 Cal.. The octagon barrel is fitted with a brass blade front sight. The notch in the center of the frame serves as the rear sight. This revolver has a few small handling marks typical of normal use. Pocket Model revolvers were favored by gamblers, off-duty law officers, postmasters, and gentlemen of means and high position.

The factory recommends .322" round balls, and each chamber will hold 9 grains of FFFg powder. Cover each ball with a small amount of bullet lubricant grease. Despite your best efforts, this revolver will need to be cleaned after 10 or 15 shots. Lower the loading lever, remove the cylinder pin, and cylinder. Wipe the face of the cylinder, and wipe the cylinder pin. If you continue to load and fire a badly fouled revolver, the effort needed to cock and fire the gun will become greater, causing the small internal hand, spring, and cylinder latch to become worn and slightly damaged. Continued use will cause the cylinder and latch to become out-of-time. Simple cleaning and maintenance will prevent problems.

Lightly used in well maintained condition this small caliber revolver is easy to handle. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.