This used .54 caliber Thompson Center Hawken percussion rifle is ready to shoot. This rifle was assembled from a kit with a factory blued barrel. The American black walnut stock has scattered handling marks, and the brass furniture has aged to a mellow patina. The bore is bright and has been well maintained. Weight is 8.9 pounds, and with a trigger reach of 14-1/4 inches, the rifle is perfectly setup for today's taller size shooter. This rifle has the optional sling swivel mounts fitted to the ramrod pipe and buttstock.

The factory blued barrel is .54 caliber, 1" octagon, 28" length. The front sight is Thompson Center's blued steel bead sight. The rear sight is click adjustable for elevation, and screw adjustable for windage. The bore is bright and clean, with crisp rifling grooves. We recommend our .530" round ball, .015" patch, over a charge of 70 grains of black powder. This rifle pre-dates the QLA muzzle and the bore is rifled all the way to the end of the muzzle.

The rifle is stocked in black walnut and trimmed in brass furniture. The stock has a few minor handling marks from field use. Finished from a kit, the top of the wrist is still flat around the tang extending down to the comb. The furniture has acquired a mellow patina from age, with some heavier verdigris on the patchbox. Our top view shows the flatted wrist and the three hole tang of the hooked breech. The hooked breech allows the barrel to easily be removed for cleaning. Simply press out the brass wedge key, using thumb pressure, and remove the ramrod. Then lift the muzzle end, to unhook the breech plug from its tang. Remove the nipple, and insert the breech end into a bucket of hot soapy water, for easy cleaning. Our bottom view shows that the brass triggerguard has developed a dark patina. The wooden ramrod is fitted with a brass loading tip and the rear brass tip has 10-32 threads for loading and cleaning accessories. The beaver tail cheek provides a nice rest for a right hand shooter. The single lock bolt passes through a simple brass washer style sideplate.

The color case hardened percussion lock is factory engraved and color case hardened. The breech is fitted with a 1/4-28 stainless steel nipple for a No. 11 cap. Double lever double set triggers are well adjusted, to fire set or unset. When the rear trigger is set (latched), the front trigger has a hair-trigger release, perhaps 2 or 3 ounces. The adjustment screw between the triggers allows even finer or coarser adjustment, as desired. Or, turn the screw fully inboard, to disable the set trigger feature, when hunting in very cold weather.

This Thompson Center Hawken Rifle was assembled from a kit and is offered with a bright clean bore. It is ready for the range or hunting woods. We invite trades, and we buy T/C guns. If you have a used Thompson Center Seneca, Hawken, Cherokee, Renegade, Patriot Pistol, New Englander, or other muzzle loading side hammer rifle, please consider our service when you are ready to sell. Our customers like these well made American guns, for their reliable service, durable reputation, accuracy, and good value. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.