C.V.A. Plainsman Rifle,
.50 caliber, 26" barrel,
beech, percussion, used






This C.V.A. percussion rifle is offered as a very utilitarian hunting rifle. The beech stained as walnut stock is trimmed in blued furniture with a black hard rubber buttplate. Trigger reach is 13-3/4", and this rifle weighs only 6 pounds..
The barrel is 26" length, blued steel, .50 caliber, with 1 turn in 48" twist rifling. This compromise twist will shoot either balls or bullets. Try the Hornady Great Plains bullets, and similar .50 caliber Maxi and Minie bullets. A brass blade front sight and adjustable rear sight are fitted. The drum and nipple is fitted to accept a No. 11 6-1mm metric nipple.
Used, this short rifle has a clean bright bore. The color hardened percussion lock shows no obvious wear. The factory stock varnish has a few small handling marks, from normal use. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
The barrel is 26" length, blued steel, .50 caliber, with 1 turn in 48" twist rifling. This compromise twist will shoot either balls or bullets. Try the Hornady Great Plains bullets, and similar .50 caliber Maxi and Minie bullets. A brass blade front sight and adjustable rear sight are fitted. The drum and nipple is fitted to accept a No. 11 6-1mm metric nipple.
Used, this short rifle has a clean bright bore. The color hardened percussion lock shows no obvious wear. The factory stock varnish has a few small handling marks, from normal use. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

C.V.A. Plainsman Rifle,
.50 caliber, 26" barrel,
beech, percussion, used
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Bore brush, bronze, for .50 caliber, 10-32 thread
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
Nipple, 6-1mm metric thread, for CVA rifles and shotguns, Traditions, Jukar, and other Spanish mfg. guns, #11 CCI cap, stainless steel
- Cone length: 0.440"
- Thread journal length: 0.195"
- Overall length: 0.635"
- Diameter of base: 0.307"
Flush Nipple,
6-1mm thread for Spanish rifles,
stainless steel, 1/4" square shank for nipple wrench, with tubing,
fits CVA, Jukar, Traditions, Ardessa, Dikar
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Jag, jagged cleaning tip, brass, .50 caliber, 7/16" rod, 10-32 thread
Powder measure, brass, adjustable 0 to 120 grains, with spout
Nipple Wrench for Rifles & Shotguns,
slotted end for #11 nipple
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Ramrod,
7/16" hickory, 48" long, brass tip, 10-32 thread
Made in the U.S.A.
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
CVA-S
Nipple, 6-1mm metric thread, for CVA rifles and shotguns, Traditions, Jukar, and other Spanish mfg. guns, #11 CCI cap, stainless steel
Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
FLUSH-CVA
Flush Nipple,
6-1mm thread for Spanish rifles,
stainless steel, 1/4" square shank for nipple wrench, with tubing,
fits CVA, Jukar, Traditions, Ardessa, Dikar
OX-CLEAN-58C
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber