Charles Moore Pistol , .36 caliber, 11" barrel, percussion, walnut, iron trim, set trigger, with factory box, by Davide Pedersoli Inspired by original pieces built by Charles Moore of London, this reproduction percussion English dueling pistol was produced by Davide Pedersoli of Italy. Offered in excellent condition the pistol includes the factory carton. This pistol is fitted with a single set trigger for target shooting. The single set trigger on these pistols is excellen       AAV-652 . . . $849.00

Enfield Musketoon , .58 caliber, 24" barrel, percussion, walnut, brass, used by Davide Pedersoli & Co. This Enfield Musketoon, with 24" barrel, is dated 1861 on the lock plate. Made for the caliber .577 hollow base Minie bullet that allowed quick reloading, achieved fine accuracy, and much longer range than the round ball muskets of an earlier generation. The rear sight is calibrated and marked in 100 yard increments, up to 600 yards. Enfield musket       AAV-656 . . .

Late Virginia Longrifle , .40 caliber, 42" Colerain barrel, Chambers' late Ketland flintlock, walnut, iron, new, unfired, by T. Gray This fine rifle by contemporary maker T. Gray has a early 19th century appearance. This rifle features very neatly fitted furniture and sleek shaping. The rifle appears to be inspired by examples by John Jacob Sheets who worked in Virginia in the 19th century. The black walnut stock is trimmed in blued iron furniture. The lock is a Jim Chambers'       AAV-660 . . . $3,579.00

Hawken Rifle , .54 caliber, 36" Douglas XX barrel, walnut, iron, percussion, fine quality, used, signed by Robert S. Hannahs If you are a muzzle loading expert, you recognize this handsomely finished Hawken rifle as the work of the famous custom gun maker, Robert Hannahs, The House of Hawken, Kenosha, Wisconsin . Made in 1972, it is used with only a few scattered handling marks on the stock. Made for a 6'0" or taller shooter, this rifle has a full 14-3/8" trigger reach.       AAV-665 . . .

Canoe Gun , 20 gauge, 24" octagon-to-round barrel, Chambers' English flintlock, maple, iron, used This short barreled canoe guns is stocked in maple with a round faced flintlock. Made without a rear sight, this gun qualifies for NMLRA trade gun match events, shooting patched round balls at paper targets, and shot charges at clay birds. It will be a powerful short range hunting gun, very handy when hunting from a boat or in thick brush. Trigger       AAV-691 . . .

Virginia Longrifle , .50 caliber, Getz 42" swamped octagon barrel, maple, engraved brass furniture, sliding wooden patchbox, L&R flintlock, used, signed by .T. Briggs This James River influenced Virginia longrifle shows a blend of English and Germanic influences. The large wide buttplate is typical of those found on many English fowlers, while the cheek piece is of Germanic influence. The large round faced lock is typical of many Southern rifles, and is designed for fast, reliable ignition. Stocked in curly mapl       AAV-693 . . . $2,699.00

Model 1862 Pocket Navy Revolver , .36 caliber, 5-1/2" octagonal barrel, silver plated brass triggerguard and backstrap, used, with some marks, by Colt - Second Generation This replica 1862 Colt Pocket Navy Model revolver is .36 caliber, with a five shot cylinder, and 5-1/2" octagon barrel. The cylinder and barrel are finished to a dark blue. The frame, hammer, and loading lever are color case hardened. The triggerguard and backstrap are silver plated. The walnut grips are stained to a reddish brown. This revolver ha       AAV-705 . . .

Colt Model 1849 Pocket Model Percussion Revolver , .31 caliber, 4" barrel, blued, silver plated triggerguard, unfired with box, by Colt - Signature Series This replica 1849 Colt Pocket Model revolver is .31 caliber, with the high polished blue, color case hardening, and silver plated triggerguard and backstrap. The revolver appears to unfired with the factory carton. The plating on this example is in excellent condition, as they often speckle when stored in the box. The frame is color case hardened       AAV-706 . . .

Thompson Center Hawken , .50 caliber, 28" barrel with QLA muzzle, percussion, walnut stock, brass trim, used, by Thompson Center Arms This used .50 caliber Thompson Center Hawken percussion rifle is ready to shoot. This factory assembled rifle is stocked in American black walnut, with brass furniture, and 28" barrel with QLA muzzle. The bore is bright and has been well maintained. The stock has a few scattered handling marks, and the brass has been blackened to reduce glare when       AAV-712 . . . $550.00

Virginia Longrifle , .54 caliber, 44" swamped Colerain barrel, flintlock, curly maple, brass trim, new, by Thom Frazier Created by Minnesota gun maker Thom Frazier , this rifle is signed on the top flat of the barrel, and is a nice example of this popular gun maker's work. This rifle is as-new, unfired. Regular use will give the bright finish on the lock and brass furniture a mellow patina. This Shenandoah County, Virginia style rifle is stocked in curly maple and       AAV-720 . . .

The Golden Age of the American Schuetzenfest, a History and Study of the Marksman's Art by Randolph Schreiter Wright From the 1890's until the U.S. entry into World War I, the target shooting game known as Schuetzen was in its Golden Age. Rifle shooing contests were held at Schuezten parks across the U.S. in cities large and small. With deep European roots, Schuetzen has origins that reach back more than half a millennium. Immerse yourself in the history of the S       BOOK-GA-AS . . . $48.99

Gunsmithing Tips & Projects , a collection of the best ideas, second edition from Rifle Magazine A collection of the best gunsmithing articles from twenty years of Rifle magazine. This soft cover second edition has been expanded to 547 pages, filled with articles on modern and antique gunsmithing projects, suggestions for finishing wood and metal, improving accuracy, decorating stocks, selecting and improving tools for the serious gunsmithing       BOOK-GTP . . . $39.95

Early Tennessee , pre shaped, pre-inlet stock, 15/16" octagon, 42" barrel, L&R Durs Egg lock Our early Tennessee fullstock is late flint era, early for the area of the Southern Mountains. Pre-inlet for any 15/16” octagon 42” barrel, drilled full depth for a 3/8” ramrod. Cut for an L&R Durs Egg flint or percussion lock, our #TR-DST-4 or #TR-DST-6 double set triggers, our #TG-TN-2-I triggerguard, and our Tennessee lollipop tang plug. Trigger

Stock, Early Tennessee , pre-inlet L&R Durs Egg lock, 15/16" octagon, 42" barrel, plain maple Our early Tennessee fullstock is late flint era, early for the area of the Southern Mountains. Pre-inlet for any 15/16” octagon 42” barrel, drilled full depth for a 3/8” ramrod. Cut for an L&R Durs Egg flint or percussion lock, our #TR-DST-4 or #TR-DST-6 double set triggers, our #TG-TN-2-I triggerguard, and our Tennessee lollipop tang plug. Trigger       STK-ETI-15-M1 . . . $240.00

Stock, Early Tennessee , pre-inlet L&R Durs Egg lock, 15/16" octagon, 42" barrel, semi-fancy maple Our early Tennessee fullstock is late flint era, early for the area of the Southern Mountains. Pre-inlet for any 15/16” octagon 42” barrel, drilled full depth for a 3/8” ramrod. Cut for an L&R Durs Egg flint or percussion lock, our #TR-DST-4 or #TR-DST-6 double set triggers, our #TG-TN-2-I triggerguard, and our Tennessee lollipop tang plug. Trigger       STK-ETI-15-M2 . . . $269.00

Stock, Early Tennessee , pre-inlet L&R Durs Egg lock, 15/16" octagon, 42" barrel, fancy maple Our early Tennessee fullstock is late flint era, early for the area of the Southern Mountains. Pre-inlet for any 15/16” octagon 42” barrel, drilled full depth for a 3/8” ramrod. Cut for an L&R Durs Egg flint or percussion lock, our #TR-DST-4 or #TR-DST-6 double set triggers, our #TG-TN-2-I triggerguard, and our Tennessee lollipop tang plug. Trigger       STK-ETI-15-M3 . . . $329.00

Stock, Early Tennessee , pre-inlet L&R Durs Egg lock, 15/16" octagon, 42" barrel, extra fancy maple Our early Tennessee fullstock is late flint era, early for the area of the Southern Mountains. Pre-inlet for any 15/16” octagon 42” barrel, drilled full depth for a 3/8” ramrod. Cut for an L&R Durs Egg flint or percussion lock, our #TR-DST-4 or #TR-DST-6 double set triggers, our #TG-TN-2-I triggerguard, and our Tennessee lollipop tang plug. Trigger       STK-ETI-15-M4 . . . $399.00

John Vincent & Son, pre shaped stock, pre-inlet, 13/16", or 7/8" octagon barrel, Goulcher lock Shaped and pre-inlet for a 13/16", or 7/8" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ram

Stock, John Vincent & Son, pre-inlet, 13/16" octagon barrel, Goulcher lock, plain maple Shaped and pre-inlet for a 13/16" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole       STK-JVI-13-M1 . . . $210.00

Stock, John Vincent & Son, pre-inlet, 13/16" octagon barrel, Goulcher lock, fancy maple Shaped and pre-inlet for a 13/16" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole       STK-JVI-13-M3 . . . $270.00

Stock, John Vincent & Son, pre-inlet, 13/16" octagon barrel, Goulcher lock, extra fancy maple Shaped and pre-inlet for a 13/16" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole       STK-JVI-13-M4 . . . $350.00

Stock, John Vincent & Son, pre-inlet, 7/8" octagon barrel, Goulcher lock, plain maple Shaped and pre-inlet for a 7/8" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole is       STK-JVI-14-M1 . . . $210.00

Stock, John Vincent & Son, pre-inlet 7/8" octagon barrel, Goulcher lock, fancy maple Shaped and pre-inlet for a 7/8" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole is       STK-JVI-14-M3 . . . $270.00

Stock, John Vincent & Son, pre-inlet, 7/8" octagon barrel, Goulcher lock, extra fancy maple Shaped and pre-inlet for a 7/8" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole is       STK-JVI-14-M4 . . . $350.00

H. E. Leman Trade Rifle , pre shaped stock, non-inlet 15/16", or 1" octagon, 42" barrel Fullstock rifles were made for the early westbound trade, by Henry Eicholtz Leman at his factory in Lancaster, Pennsylvania. Leman often used plain maple, and painted the stripes. Choose your parts, order our full size plans for the Leman rifle, and build your own. The Leman fullstock trade rifle is an easy first scratch-building project. Butt end

has been added to your .

---