Stock, H. E. Leman Indian Trade Rifle , pre shaped, 1" octagon, 36" barrel, Leman percussion lock, plain maple Modeled after an early fullstock from H. E. Leman's factory in Lancaster, Pennsylvania, our pre-inlet right hand fullstock is cut for a 1" straight octagon barrel up to 36" length. Pre-inlet for Track's H.E. Leman percussion lock, H.E. Leman single trigger & trigger plate, triggerguard, and breech plug. Right hand, all have a 7/16" ramrod hole dril       STK-LEMAN-I-TR-16-M1 . . . $240.00

Stock, H. E. Leman Indian Trade Rifle , pre shaped, 1" octagon, 36" barrel, Leman percussion lock, semi-fancy maple Modeled after an early fullstock from H. E. Leman's factory in Lancaster, Pennsylvania, our pre-inlet right hand fullstock is cut for a 1" straight octagon barrel up to 36" length. Pre-inlet for Track's H.E. Leman percussion lock, H.E. Leman single trigger & trigger plate, triggerguard, and breech plug. Right hand, all have a 7/16" ramrod hole dril       STK-LEMAN-I-TR-16-M2 . . . $269.00

Stock, H. E. Leman Indian Trade Rifle , pre shaped, 1" octagon, 36" barrel, Leman percussion lock, fancy maple Modeled after an early fullstock from H. E. Leman's factory in Lancaster, Pennsylvania, our pre-inlet right hand fullstock is cut for a 1" straight octagon barrel up to 36" length. Pre-inlet for Track's H.E. Leman percussion lock, H.E. Leman single trigger & trigger plate, triggerguard, and breech plug. Right hand, all have a 7/16" ramrod hole dril       STK-LEMAN-I-TR-16-M3 . . . $329.00

Tap , high carbon steel, 10-36 thread, plug tap, to start a blind or through hole Tap, high carbon steel, 10-36 SPECIAL thread, plug tap with three to five threads chamfered. This special non-standard thread size is often needed to thread tangs for sight screws, to accept Axtell tang sights, exactly as used on the original rifles. Tap Drill: for 10-36 thread, use No. Drill-21 Clearance Drill: for 10-36 thread, use fractional       TAP-10-36-P . . . $19.99

French Trade Pistol , .62 caliber smoothbore, 13-1/2" barrel, L&R flintlock, walnut, brass trim, new, unfired, by T. Frasier Neatly assembled by contemporary builder T. Frazier this pistol is a commercial trade pistol circa the early 1730's with a French Dragoon pistol influence. The 1731 and 1732 era French Dragoon pistols used 15-1/2" barrels, when in 1733 the length was reduced to 12". Weight of the pistol is 3 pounds and it fits comfortably into the average size ma       AAU-821 . . . $2,699.00

French Trade Pistol , .54 caliber smoothbore, 12" barrel, L&R flintlock, walnut, brass trim, new, unfired, by T. Frasier Neatly assembled by contemporary builder T. Frazier this pistol is a commercial trade pistol circa the late 1720' to 1730's with a French Dragoon pistol influence. The 1731 and 1732 era French Dragoon pistols used 15-1/2" barrels, when in 1733 the length was reduced to 12". Weight of the pistol is 3 pounds and it fits comfortably into the average       AAU-882 . . . $2,979.00

Antique Gentleman's Belt Pistol , .52 caliber smoothbore, 5-3/4" Damascus barrel, flintlock, walnut, iron, silver wire inlay This antique flintlock belt pistol has a French influence and is neatly decorated with silver wire inlay for a gentleman. This pistol has a .52 caliber smoothbore Damascus octagon-to-round barrel. The stock shows a visible repair all the way around the grip. Stocked in walnut, and trimmed in iron furniture, this antique pistol has a warm patina. Th       AAV-045 . . . $1,799.00

British Dragoon Pistol , .62 caliber smooth bore, 10-1/2" barrel, Chambers flint lock, walnut, brass trim, new, by Kendall Brady This is a reproduction of a British Dragoon pistol that is finely crafted and offered in new condition. The English dragoon pistol is an ideal accoutrement for Revolutionary War period events. Stocked in correct walnut, trimmed with brass furniture, this pistol features a tapered round .62 caliber smooth bore, 10-1/2" barrel with a clean bright bor       AAV-047 . . . $3,375.00

Antique Howda Pistol , .62 caliber smoothbore, 7-3/4" barrels, over under, back action locks, nickel silver furniture, raised carved walnut This antique Howda pistol is assembled with over under barrels with Damascus twist barrels. The walnut stock has raised and incised carving on the grip. The stock has a repair beneath the lock panel. The triggerguard and buttcap are nickel silver. The butt has a shell shaped door with storage cavity. The .62 caliber barrels have rough bores with sc       AAV-314 . . . $2,399.00

French Pistol , .50 caliber smoothbore, 7-1/2" tapered round barrel, R.E. Davis flintlock, engraved brass, walnut, new, unfired, by Leonard Day III Neatly hand made by contemporary builder Leonard Day III , this well made French pistol is stocked in dark stained black walnut. The brass furniture is polished bright and has a few hand engraved accents. The R.E. Davis Becky's flintlock and 7-1/2" octagon-to-round barrel are finished to a smooth dark blue. The .50 caliber smoothbore 7-1/2" barrel       AAV-409 . . . $1,999.00

Kentucky Pistol , .54 caliber, 8-1/2" octagon-to-round barrel, flintlock, walnut, brass, used This flint lock pistol features a .54 caliber octagon-to-round barrel with a bright well maintained bore. Stock in walnut and trimmed in brass furniture, this pistol points naturally. Perfect for your next Colonial reenactment, this handy pistol weighs 2.5 pounds. The .54 caliber 8-1/2" octagon-to-round barrel transitions at the midpoint with a si       AAV-577 . . . $2,599.00

1730 era Dragoon Pistol , .62 caliber smoothbore, 10" barrel, Chambers flint lock, walnut, brass trim, used, by Kenneth Lincavage Assembled by contemporary builder Kenneth Lincavage this pistol is a replica of an English Dragoon pistol. The .62 caliber smoothbore barrel is polished bright both inside and out. The walnut stock has been stained dark brown and was finished with a gloss varnish that was then rubbed back to produce the satin sheen now visible on the gun. This pi       AAV-644 . . . $1,989.00

Antique Double Barrel Shotgun , 12 gauge, 32" Damascus barrels, percussion, walnut, iron furniture, made in Belgium This antique double barrel percussion shotgun is stocked in checkered walnut with damascus 12 gauge barrels.  The barrels have Belgian proof marks, but otherwise this shotgun is unsigned. The furniture is iron with a brass cap box and nickel silver escutcheon plates around the wedge key. The stock has some sanding marks, and a gloss finish has been       AAV-692 . . . $999.00

Antique Remington Model 1894 Shotgun , 12 gauge, 2-5/8" chambers, 30" Damascus barrels, checkered walnut, tight action, scattered patina, used, by Remington Arms Co. This antique Remington Model 1894 hammerless shotgun is stocked in checkered walnut, and has Damascus steel barrels. The barrels have mostly bright bores, with scattered light pitting. This shotgun shows many handing marks and has a few raised rough areas on the exterior barrel finish where is appears it was stored against something that was damp f       AAV-767 . . . $399.00

Barrel, 20 gauge , 30" octagon-to-round, smooth bored, crowned, threaded for 3/4-16 plug Tapered octagon-to-round 20 gauge smoothbore barrel, exclusively from Track® Our 20 gauge barrel is our most popular octagon-to-round barrel, offered in 30" lengths. Our 20 gauge 30" barrel exactly fits Track's own pre-inlet stocks: Track's English Fowling Gun stock Track's North West Trade Gun stock Our 20 gauge barrel also fits certain oth       BBL-20-30 . . . $229.00

Barrel, 20 gauge , 36" octagon-to-round, smooth bored, crowned, threaded for 3/4-16 plug Tapered octagon-to-round 20 gauge smoothbore barrel, exclusively from Track® Our 20 gauge barrel is our most popular octagon-to-round barrel, offered in a 36" or 42" length. Both sizes are identical, except for length, and other lengths may be ordered up to 42" at small extra cost. Our 20 gauge 36" barrel exactly fits Track's own pre-inlet stocks:       BBL-20-36 . . . $249.00

Barrel, 20 gauge , 42" octagon-to-round, smooth bored, crowned, threaded for 3/4-16 plug Tapered octagon-to-round 20 gauge smoothbore barrel is made in the U.S.A., exclusively for Track® by Colerain Barrel Company. Our 20 gauge barrel is our most popular octagon-to-round barrel, offered in 36" or 42" lengths. Both sizes are identical, except for length, other lengths may be ordered up to 42" at small extra cost. Track's best 20 gauge 4       BBL-20-42 . . . $259.00

Barrel, 24 gauge , 42" octagon-to-round, smooth bored, crowned, threaded for 3/4-16 plug Tapered octagon-to-round 24 gauge smoothbore barrel, exclusively from Track® Our 24 gauge barrel has the identical outside dimensions as our most popular 20 gauge octagon-to-round barrel. Offered in 42" length. Other lengths may be ordered up to 42" at small extra cost. Track's best 24 gauge 42" barrel exactly fits Track's pre-inlet stocks: Track'       BBL-24-42 . . . $259.00

Barrel, .32 caliber , 13/16" octagon, 42", 1-48" twist, 5.5 lb, crowned, 5/8-18 thread for breech plug, made in the U.S.A. Made with pride in the U.S.A. to meet the demands of today's shooters. Our 42" straight octagon barrel blank is cut rifled with six lands and square grooves with a caliber appropriate 1 in 48" twist for a patched round ball. The muzzle is crowned. The breech is threaded 0.500" deep with a 5/8-18 thread for a breech plug. As with any barrel the octa       BBL-32-A-42 . . . $215.00

Barrel, .36 caliber , 13/16" octagon, 36", 1-48" twist, 4.5 lb, crowned, 5/8-18 thread for breech plug, made in the U.S.A. Made with pride in the U.S.A. to meet the demands of today's shooters. Our .36 caliber 36" straight octagon barrel blank is cut rifled with six lands and square grooves with a caliber appropriate 1 in 48" twist for a patched round ball. The muzzle is crowned. The breech is threaded 0.500" deep with a 5/8-18 thread for your breech plug. As with any       BBL-36-A-36 . . . $200.00

Barrel, .36 caliber , 13/16" octagon, 42", 1-48" twist, 5.2 lb, crowned, 5/8-18 thread for breech plug, made in the U.S.A. Made with pride in the U.S.A. to meet the demands of today's shooters. Our 42" straight octagon barrel blank is cut rifled with six lands and square grooves with a caliber appropriate 1 in 48" twist for a patched round ball. The muzzle is crowned. The breech is threaded 0.500" deep with a 5/8-18 thread for a breech plug. As with any barrel the octa       BBL-36-A-42 . . . $215.00

Barrel, .40 caliber , 13/16" octagon, 36", 1-48" twist, 4.2 lb, crowned, 5/8-18 thread for breech plug, made in the U.S.A. Made with pride in the U.S.A. to meet the demands of today's shooters. Our .40 caliber 36" straight octagon barrel blank is cut rifled with six lands and square grooves with a caliber appropriate 1 in 48" twist for a patched round ball. The muzzle is crowned. The breech is threaded 0.500" deep with a 5/8-18 thread for your breech plug. As with any       BBL-40-A-36 . . . $200.00

Barrel, .40 caliber , 13/16" octagon, 42", 1-48" twist, 4.9 lb, crowned, 5/8-18 thread for breech plug, made in the U.S.A. Made with pride in the U.S.A. to meet the demands of today's shooters. Our 42" straight octagon barrel blank is cut rifled with six lands and square grooves with a caliber appropriate 1 in 48" twist for a patched round ball. The muzzle is crowned. The breech is threaded 0.500" deep with a 5/8-18 thread for a breech plug. As with any barrel the octa       BBL-40-A-42 . . . $215.00

Barrel, .40 caliber , 7/8" octagon, 36", 1-48" twist, 4.5 lb, crowned, 5/8-18 thread for breech plug, made in the U.S.A. Made with pride in the U.S.A. to meet the demands of today's shooters. Our .40 caliber 36" straight octagon barrel blank is cut rifled with six lands and square grooves with a caliber appropriate 1 in 48" twist for a patched round ball. The muzzle is crowned. The breech is threaded 0.500" deep with a 5/8-18 thread for your breech plug. As with any       BBL-40-B-36 . . . $200.00

Barrel, .40 caliber , 7/8" octagon, 42", 1-48" twist, 5.9 lb, crowned, 5/8-18 thread for breech plug, made in the U.S.A. Made with pride in the U.S.A. to meet the demands of today's shooters. Our 42" straight octagon barrel blank is cut rifled with six lands and square grooves with a caliber appropriate 1 in 48" twist for a patched round ball. The muzzle is crowned. The breech is threaded 0.500" deep with a 5/8-18 thread for a breech plug. As with any barrel the octa       BBL-40-B-42 . . . $215.00

has been added to your .

---