Your search for 'sights'
returned
613 results.
|
Rear sight , with extra long base, wax cast steel
Wax cast steel, not polished, cut this extra long sight base sight to fit nearly any old dovetail. Cut this sight to fit your rifle, do not enlarge the dovetail slot in your barrel. Made in the U.S.A., the dovetail is about 1.275” length, and the base is .520” wide.
|
|
Rear sight, low long base longrifle style for 13/16" or 7/8" barrels, wax cast steel
Original longrifles were nearly always fitted with "fine" (low) sights, in the mistaken belief that the low sights reduced sighting error. Too low for good target work, use it to restore or replicate an original antique rifle. Wax cast with a 1" dovetail, about .535" wide for use on a 13/16" or 7/8" barrel. Dovetail to a depth of .050", the blade w
|
|
Rear sight, low long base longrifle style for 15/16" or 1" barrels, wax cast steel
Original longrifles were nearly always fitted with "fine" (low) sights, in the mistaken belief that the low sights reduced sighting error. Too low for good target work, use it to restore or replicate an original antique rifle. Wax cast with a 1" dovetail, about .585" wide for use on a 15/16" or 1" barrel. Dovetail to a depth of .050", the blade wil
|
|
Rear sight, large Hawken style, wax cast steel
Wax cast steel, this rear sight has a long base to fit a slot .740" long, .58" wide and .050" deep. Easily shortened, this larger sight looks right on a big plains rifle with a 15/16" or 1" octagon barrel. Made in the U.S.A. This semi-buckhorn sight is one of our favorites.
|
|
Rear sight, semi-buckhorn style for 13/16", or 7/8" octagon barrel, wax cast steel
Wax cast steel, not polished, this traditional style sight is suitable for a long rifle with a 13/16", or 7/8" octagon barrel. This high sight reduces heat mirage, and tilt minimizes glare. Sight has a notch cast in the blade, which can easily be enlarged if necessary. Made in the U. S. A., dovetail to a depth of .050", dovetail is .382" long, and
|
|
Rear sight, semi-buckhorn style for 15/16", or 1" octagon barrel, wax cast steel
Wax cast steel, not polished, this traditional style sight is suitable for a long rifle with a 15/16", or 1" octagon barrel. This high sight reduces heat mirage, and tilt minimizes glare. Sight has a notch cast in the blade, which can easily be enlarged if necessary. Made in the U. S. A., dovetail to a depth of .050", dovetail is .382" long, and .5
|
|
Front Sight Base , machined from solid brass
Almost sculptured, this sight base is machined from solid brass stock, with a 0.375" dovetail about 0.750" wide, and 0.062 deep. Slotted to accept sheet stock .062" thick, order our #SHEET-062-B or #SHEET-062-S and cut your own sight blade. Available in brass, steel, or copper.
|
|
Front Sight Base , machined from solid copper
Almost sculptured, this sight base is machined from solid copper stock, with a 0.375" dovetail about 0.750" wide, and 0.062 deep. Slotted to accept sheet stock .062" thick, order our #SHEET-062-B or #SHEET-062-S and cut your own sight blade. Available in brass, steel, or copper.
|
|
Front Sight Base , machined from solid steel
Almost sculptured, this sight base is machined from solid steel stock, with a 0.375" dovetail about 0.750" wide, and 0.062" deep. Slotted to accept sheet stock .062" thick, order our #SHEET-062-B or #SHEET-062-S and cut your own sight blade. Available in brass, steel, or copper.
|
|
Thompson Center Patridge Front Sight Blank , steel base
A wax cast steel front sight, in the style of the Thompson Center, blade front sight. The dovetail fits a 3/8" slot measuring .375" long, .565" wide, and .093" deep. The as-cast blade is .100" thick, standing .400" above the base. Available in steel only.
|
|
Lyman 66 Receiver Peep Sight , fits Marlin 336, 1894, and 1895
Black aluminum, with two eye disks, easily installed on a Marlin 336, 1894, and 1895 rifles. Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. Large 5/8" diameter knurled disk is drilled .040". Small 1/2" diameter knurled disk is drilled with a .092" aperture for large fie
|
|
Rear sight, primitive buckhorn, for 13/16" or 7/8" octagon barrel, wax cast steel
This primitive buckhorn rear sight has a base .375" long, .53" wide. Dovetail 0.050" deep. The top of the notch will be 0.24" above the plane of the barrel. Use this primitive buckhorn rear sight on a 13/16 or 7/8" octagon rifle barrel. Wax cast steel. As-cast, not polished, not blued or browned. Remove the casting gate before hand fitting. Deepen
|
|
Rear sight, primitive buckhorn, for 15/16" or 1" octagon barrel, wax cast steel
This primitive buckhorn rear sight has a base .437" long, .59" wide. Dovetail 0.050" deep. The top of the notch will be 0.24" above the plane of the barrel. The base may be file fitted to smaller slots. Use this primitive buckhorn rear sight on a 15/16 or 1" octagon rifle barrel. Wax cast steel. As-cast, not polished, not blued or browned. Remove t
|
|
Rear sight , classic longrifle style, for 15/16" to 1" barrels wax cast steel
This classic longrifle rear sight has a base .380" long, .61" wide by 0.060" thick. Dovetail 0.050" deep. The top of the notch will be 0.28" above the plane of the barrel. The base may be file fitted to smaller slots. Use this classic longrifle rear sight on a 15/16 or 1" octagon rifle barrel. It could be thinned for use on smaller barrels. Wax cas
|
|
Rear sight, Tall Semi-Buckhorn, wax cast steel
This tall semi buckhorn rear sight is blank, with no notch cut. File a "V" or square notch to your desired sight picture. The base is .530" dovetail and .700 width" for barrels up to 1-1/8". Wax cast steel.
|
|
Rear sight , 1770 Lancaster style, wax cast steel
Isaac Haines style, ideal for a swamped barrel, this wax cast steel sight has concave bevels on the front three edges, and a flat top. We recommend filing a square notch for use with a blade front sight. The dovetail is about .585" long, with a .535" base about .062" deep.
|
|
Rear sight, Pennsylvania style for 13/16" or 7/8" octagon barrel, wax cast steel
Wax cast steel, not polished, this rear sight has a long base often found on early rifles. This small version is made for a longrifle with a slim 13/16" or 7/8" octagon barrel. The sight has a small notch centered on the blade. Made in the U. S. A., dovetail to a depth of .050" deep. Base is about .685" long, .530" wide as cast. Blade will stand .2
|
|
Rear sight, Pennsylvania style for 15/16" or 1" octagon barrel, wax cast steel
Wax cast steel, not polished, this rear sight has a long base often found on early rifles. This small version is made for a longrifle with a slim 15/16" or 1" octagon barrel. The sight has a small notch indicated in the blade. Made in the U. S. A., dovetail to a depth of .050" deep. Base is about .725" long, .585" wide as cast. Blade will stand .27
|