This fixed rear sight provides a little help for older eyes. This sight base may easily be shortened to fit a more narrow dovetail. Always file the sight, never file the barrel. This sight is designed for use on a longrifle with a 13/16" or 7/8" octagon barrel, or a swamped or tapered barrel of that size. The dovetail is about .750" long, as cast,

This fixed rear sight provides a little help for older eyes. This sight base may easily be shortened to fit a more narrow dovetail. Always file the sight, never file the barrel. This sight is designed for use on a longrifle with a 15/16" or 1" octagon barrel, or a swamped or tapered barrel of that size. The dovetail is about .750" long, as cast, an

Blued, with two eye disks, adapter plate allows easily installation on Lyman Great Plains rifles. Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. The larger 5/8" diameter knurled eye disk is drilled with the smaller .040" aperture for use on bright days. The smaller 1/2"

This blued sight, with two eye disks, is easily installed on Thompson Center, Lyman Deerstalker, Lyman Trade Rifle, and similar Hawken rifles. Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. Small 5/8" diameter knurled disk is drilled .040". Large 1/2" diameter knurled d

Black aluminum, with two eye disks, easily installed on a Winchester 1894 pre-angle eject rifle (94AE). Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. Large 5/8" diameter knurled disk is drilled .040". Small 1/2" diameter knurled disk is drilled with a .092" aperture fo

Black aluminum, with two eye disks, easily installed on a Marlin 336, 1894, and 1895 rifles. Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. Large 5/8" diameter knurled disk is drilled .040". Small 1/2" diameter knurled disk is drilled with a .092" aperture for large fie

Black aluminum, with two eye disks, easily installed on a Winchester 1886 and Browning 1886 replicas. Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. Large 5/8" diameter knurled disk is drilled .040". Small 1/2" diameter knurled disk is drilled with a .092" aperture for

This antique target rifle is marked A. Leonard SR Vt, who we believe to be A. Leonard from Saxon River, Vermont who was active from 1843 to 1860. The firm changed names to A. Leonard & Sons circa 1848, so this rifle could possibly be dated circa 1843 to 1848 based on the die stamped marking on the barrel. This is a very well made percussion target

Aperture disk, large, #2 fits Lyman RS-57-SML or RS-57-GPR sight. Small 1/2" diameter knurled disk is drilled with large .092" aperture for cloudy light conditions. You can easily enlarge this if desired.

Aperture disk, small, #2 fits Lyman RS-57-SML or RS-57-GPR sight. Large 5/8" diameter knurled disk is drilled with small .040" aperture for bright light conditions. You can easily enlarge this if desired.

This mid-range 3" Creedmoor Vernier tang sight is a bit stronger and simpler than our similar sight with pivoting adjustments. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to scribe a zero mark, since the vane is unmarked. Two 4-.7mm moun

This mid-range 3" Creedmoor Vernier tang sight includes two pivoting adjustment screws in the base, to allow perfectly true Vertical alignment, without file fitting the base to your tang. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to sc

This long-range 5" Creedmoor Vernier tang sight is a bit stronger and simpler than our similar sight with pivoting adjustments. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to scribe a zero mark, since the vane is unmarked. Two 10-28 moun

This long-range 5" Creedmoor Vernier tang sight includes two pivoting adjustment screws in the base, to allow perfectly true Vertical alignment, without file fitting the base to your tang. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to s

Blued steel, over 5" tall, this heavy gauge steel sight is calibrated with an engraved Vernier scale, from 0 to 3 inches elevation, with two windage adjustments. Zero the rifle at the eyepiece. Adjust the calibrated base to compensate for current wind conditions. The eye disk is threaded 5-.5MM to accept Pedersoli manufactured Hadley eye disk #RS-D

Blued steel, over 3" tall, this heavy gauge steel sight is calibrated with an engraved Vernier scale, from 0 to 2 inches elevation, with two windage adjustments. Zero the rifle at the eyepiece. Adjust the calibrated base to compensate for current wind conditions. The eye disk is threaded 5-.5MM to accept Pedersoli manufactured Hadley eye disk #RS-D

Blued steel, finished non-glare blue black, this Hadley eye disk is threaded 5-.5MM to fit the Vernier Tang Sight for Davide Pedersoli's 1874 Sharps rifle #RS-DP-1874, or the Soule rear sight #RS-DP-SOULE-4. The rim is knurled for easy insertion. Roll the small knurled wheel to select one of eight apertures. A small spring loaded ball detent locks

Pedersoli's Soule mid range tang sight has three mounting holes in the base, to fit most popular black powder rifles. The front hole is elongated to fit other brands of rifles which may have different hole spacing. The nominal centers are 2.26" apart. It will fit Sharps rifles with a 2.260" hole spacing, and Winchester 2.180" hole spacing. The eye

Pedersoli's Soule long range tang sight has three mounting holes in the base, to fit most popular black powder rifles. The front hole is elongated to fit other brands of rifles which may have different hole spacing. The nominal centers are 2.25" apart. It will fit Sharps rifles with a 2.260" hole spacing, and Winchester 2.180" hole spacing. The eye

William Lyman invented these sights, and founded the Lyman Gunsight Company in 1878. These are wonderfully precise replicas. The Lyman No. 2 sight for Henry lever action rifles. Lyman recommends this sight for the following models:H006 – Big Boy, Big Boy Carbine, Big Boy SilverH009 – All-Weather 30-30H010 – All-Weather 45-70H012 – Big Boy All Weath

William Lyman invented these sights, and founded the Lyman Gunsight Company in 1878. These are wonderfully precise replicas. The Lyman No. 2 sight for Marlin fits Model 1895, 336 and 30. A base adapter protects the serial number. Holes are on .834" centers. Sights include one longer 12-32 tang bolt, two 10-32 mounting screws, detailed instructions

William Lyman invented these sights, and founded the Lyman Gunsight Company in 1878. These are wonderfully precise replicas. This Lyman No. 2 sight is designed to fit a Aldo Uberti & Company manufactured Winchester Model 1873 lever action rifle. This sight has standard Winchester 2.195" bolt centers. Maximum elevation from the base to the center o

William Lyman invented these sights, and founded the Lyman Gunsight Company in 1878. These are wonderfully precise replicas. The Lyman No. 2 sight for Winchester fits their Model 94, 1894, 1866, 1890, 1892, 62, and 62A lever action rifles, Model 1885 high wall and low wall single shot rifles, and Rossi Model 92 and 62 rifles and carbines. This sigh

This halfstock rifle has the appearance of a 1860 or later era longrifle. Stocked in walnut an trimmed in period nickel silver furniture. The furniture includes a crescent buttplate and triggerguard with finger spurs. The stock is fitted with a poured pewter forend cap, single wedge key with escutcheon plates. The breech/wrist has a saw handle desi