Pedersoli's Soule mid range tang sight has three mounting holes in the base, to fit most popular black powder rifles. The front hole is elongated to fit other brands of rifles which may have different hole spacing. The nominal centers are 2.26" apart. It will fit Sharps rifles with a 2.260" hole spacing, and Winchester 2.180" hole spacing. The eye

Pedersoli's Soule long range tang sight has three mounting holes in the base, to fit most popular black powder rifles. The front hole is elongated to fit other brands of rifles which may have different hole spacing. The nominal centers are 2.25" apart. It will fit Sharps rifles with a 2.260" hole spacing, and Winchester 2.180" hole spacing. The eye

Screw for Sharps Tang Sight, #10-32 thread, blued steel to mount Davide Pedersoli mid or long range 1874 Sharps tang sight to the Lyman 1878 Sharps rifle. These screws have a .270" diameter head for fit Italian manufactured tang sight base. Overall length of .375", and threaded shaft of .265". Two of these screws are required! to mount a tang sight

Blued steel, finished non-glare blue black, this Hadley eye disk is threaded 5-.5MM to fit the Vernier Tang Sight for Davide Pedersoli's 1874 Sharps rifle #RS-DP-1874, or the Soule rear sight #RS-DP-SOULE-4. The rim is knurled for easy insertion. Roll the small knurled wheel to select one of eight apertures. A small spring loaded ball detent locks

One (1) screw for Sharps Tang Sight, #10-28 thread, bright steel to mount Sharps tang sight. These screws have a .312" diameter head for fit American manufactured tang sight bases, such as Axtell, or MVA. Overall length of .375", and threaded shaft of .26". Two of these screws are required! to mount a tang sight on an a Sharps rifle. This odd #10-2

Screw for Sharps Tang Sight, #10-28 thread, bright steel to mount Sharps tang sight. These screws have a .270" diameter head for fit Italian manufactured tang sight base. Overall length of .37", and threaded shaft of .26". Two of these screws are required! to mount a tang sight on an a Sharps rifle. This odd #10-28 minimum diameter thread size fits

This blued steel globe front sight is slotted to accept the classic Sharps sight inserts. Rotate the upper retaining spring to insert one of eighteen sight inserts, from the complete set, included with the sight. Manufactured in Italy, by Davide Pedersoli. The sight now has a hidden set screw in the center of the dovetail base that is accessed by a

Made in Italy, by Davide Pedersoli, the dovetail base is slightly larger than a 3/8" standard dovetail for a snug fit. It will not fit the larger 7/16" slots on Shiloh, C. Sharps, or antique Sharps rifle dovetails. The .375" dovetail base is .080" deep, .650" wide, with a direction mark on the underside to ease installation. The center of the sight

This replica of Beach's front sight copies the post Civil War front sight found on many fine single shot and lever action rifles. The blued steel base has a .379" dovetail, .082" deep, .670" wide. The brass leaf cams over a spring, forward to show an open sight post, back to show a globe with pin head bead. Imported from Italy. The blade sight will

This front sight has a polished nickel silver blade with brass base. The rounded silver blade is .270" tall by 0.062" wide. The machined brass dovetail base is .375" long, .750" wide, and .070" deep for fitting to Davide Pedersoli rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dov

This front sight has a polished nickel silver blade with copper base. The rounded silver blade is .270" tall by 0.062" wide. The machined copper dovetail base is .375" long, .750" wide, and .070" deep for fitting to Davide Pedersoli rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the d

This front sight has a polished nickel silver blade with brass base. The rounded silver blade is .390" tall by 0.062" wide. The machined brass dovetail base is .375" long, .750" wide, and .070" deep for fitting to Davide Pedersoli rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dov

This front sight has a polished nickel silver blade with copper base. The rounded silver blade is .390" tall by 0.062" wide. The machined copper dovetail base is .375" long, .750" wide, and .070" deep for fitting to Davide Pedersoli rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the d

Machined from solid steel, this Swiss style globe front sight has an integral dovetail base measuring .360" long, .082" deep, and .780" wide, for use on barrels up to 1-1/8" octagon. The tapered steel post, ending in a bead, is screwed into this globe sight from below. The center of this sight bead stands about .404" above the bottom of the dovetai

Blued steel, over 5" tall, this heavy gauge steel sight is calibrated with an engraved Vernier scale, from 0 to 3 inches elevation, with two windage adjustments. Zero the rifle at the eyepiece. Adjust the calibrated base to compensate for current wind conditions. The eye disk is threaded 5-.5MM to accept Pedersoli manufactured Hadley eye disk #RS-D

Blued steel, over 3" tall, this heavy gauge steel sight is calibrated with an engraved Vernier scale, from 0 to 2 inches elevation, with two windage adjustments. Zero the rifle at the eyepiece. Adjust the calibrated base to compensate for current wind conditions. The eye disk is threaded 5-.5MM to accept Pedersoli manufactured Hadley eye disk #RS-D

This blued steel globe front sight has a wind gauge knob to allow windage adjustment. It is slotted to accept classic Sharps front sight inserts, included. It will also accept the inserts by C. Sharps, Shiloh, MVA, Smith Enterprise, and other standard thin Sharps globe sight inserts. Rotate the upper retaining spring to insert one of the twelve sig

We offer the set of twelve inserts separately, for use on C. Sharps, Shiloh, Montana Vintage Arms, Riflesmith, Pedersoli and other famous brand front sights. The inserts are 0.012" thick, and 0.6" wide.

We offer the set of eighteen inserts separately, for use on C. Sharps, Shiloh, Montana Vintage Arms, Riflesmith, Pedersoli and other famous brand front sights. The inserts are 0.012" thick and 0.6" wide.

This long-range 5" Creedmoor Vernier tang sight is a bit stronger and simpler than our similar sight with pivoting adjustments. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to scribe a zero mark, since the vane is unmarked. Two 10-28 moun

This long-range 5" Creedmoor Vernier tang sight includes two pivoting adjustment screws in the base, to allow perfectly true Vertical alignment, without file fitting the base to your tang. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to s

Blued, with two eye disks, adapter plate allows easily installation on Lyman Great Plains rifles. Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. The larger 5/8" diameter knurled eye disk is drilled with the smaller .040" aperture for use on bright days. The smaller 1/2"

This Mortimer .54 caliber flint lock rifle is stocked in European walnut, and is a replica of the famous rifles originally made by Mortimer, of London, circa 1820. The 35-1/2" octagon-to-round barrel is highly polished and finished to a high gloss chocolate brown. A special patent hooked breech and tang allow the barrel to lift out easily for clean

This classic North West Trade Gun has been stocked in maple and very neatly fitted and finished. The traditional styled trade gun hardware in a mixture of brass and iron furniture. This 20 gauge, .62 caliber, smooth bore flint fowling gun is fully qualified for use in the NMLRA North West Trade Gun match, using patched round balls at paper targets,