Sideplate for a Thompson Center Renegade Rifle and other models that use a steel sideplate. This a replica of the later production sideplate that fits flush with the side panel. 3/4" outside diameter, Counter-bored to accept the factory 1/4" diameter lock bolt head.

Sideplate for a Connecticut Valley Arms Mountain Rifle and other models that use a steel sideplate. Fits into a counter bore in the stock. 0.58" (15mm) outside diameter, Counter-bored to accept the factory lock bolt head.

This brass sideplate is copied directly from the sideplate used on original 1803 and 1814 rifles. The sideplate includes a subtle error. The position of the front hole is not perfectly located, requiring installation of the front screw at a slight angle. Clearing the ramrod hole is essential, and the screw must be located slightly high. You may tou

French sideplate, convex, for a Tulle fine fusil (fusil-fin), or fancy fusil-de-chasse. This sideplate may be inlet slightly, but is most often surface mounted. Ideal for use with our 3/8" deluxe dome head bolts, with 8-32 or 10-32 thread. Wax cast brass. Lock bolt holes are spaced 3" on center, to fit a fusil or fowler size flint lock. Our #SP-Tul

This simple early sideplate has an attractive pointed tail. Long enough for larger flint locks, or shorten the front end for symmetry around the front lock bolt, on rifle size locks. French influenced, this sideplate is very similar to the French Type D fusil sideplate. Wax cast brass. Made in the USA. Overall length 5-1/2", height 1-1/16", thickne

This simple early sideplate has an attractive pointed tail. Long enough for larger flint locks, or shorten the front end for symmetry around the front lock bolt, on rifle size locks. French influenced, this sideplate is very similar to the French Type D fusil sideplate. Wax cast steel. Made in the USA. Overall length 5-1/2", height 1-1/16", thickne

Engraving is cast in. Bolt holes are about perfect for our French Type “C”, Type “D”, Tulle, L & R Trade Lock, Twigg, Early Ketland and similar flintlocks. Shorten the front for smaller locks. Matching triggerguard and buttplate are available. Wax cast in brass. Made in the USA. Overall length 5-7/16", height 1", thickness 0.070". This simple early

Engraving is cast in. Bolt holes are about perfect for our French Type “C”, Type “D”, Tulle, L & R Trade Lock, Twigg, Early Ketland and similar flintlocks. Shorten the front for smaller locks. Matching triggerguard and buttplate are available. Wax cast steel. Made in the USA. Overall length 5-7/16", height 1", thickness 0.070". This simple early si

This French sideplate design is more Germanic or Jaeger shaped, similar to longrifle sideplates. Wax cast brass or steel, this sideplate may be inlet or surface mounted. The round end for the front bolt may be removed for a shorter flint lock. Available in wax cast brass or steel. Made in the USA. Overall length 5-9/16", height 1-1/16", thickness 0

This French sideplate design is more Germanic or Jaeger shaped, similar to longrifle sideplates. Wax cast brass or steel, this sideplate may be inlet or surface mounted. The round end for the front bolt may be removed for a shorter flint lock. Available in wax cast brass or steel. Made in the U.S.A. Overall length 5-9/16", height 1-1/16", thickness

This highly detailed serpent sideplate is designed to fit our North West Trade Gun stock and Tryon flintlock. This sideplate may be surface mounted, or cut into a very shallow inlet. Debur the edges and the three casting gates from the flat back surface before installation. Made for right hand use, only. Overall length 6-1/16", height 1-1/16", thic

French sideplate, flat, for a Tulle fusil-de-chasse, French Marine fusil, or French musket. Use our 1/2” diameter dome head 8-32 bolts. The lock bolt holes are on 3 inch centers, for use with our Tulle fusil lock, fowling gun lock, and similar medium large flint locks. Inlet this sideplate flush with the side panel. This nice sideplate is suitable

French sideplate, flat, for a Tulle fusil-de-chasse, French Marine fusil, or French musket. Use our 1/2" diameter dome head 8-32 or 10-32 lock bolts. The lock bolt holes are on 3 inch centers, for use with our Tulle fusil lock, fowling gun lock, and similar medium large flint locks. Inlet this sideplate flush with the side panel. This nice sideplat

This early flint musket sideplate has a domed surface, with two counterbored holes. This sideplate is pre-inlet into our First Model Brown Bess stock, circa 1746. Wax cast brass. Overall length 6-3/8", height 1-3/8", thickness 0.200". Made in the USA, by Track of the Wolf, Inc., in our own molds, copied directly from the original antique musket. Sh

Sideplate for a H.E. Leman Indian Trade Rifle, or other style of plains rifle. This 1/2" diameter sideplate has a small square lug that is should be oriented perpendicular to the barrel. Wax cast brass .080" thick the casting is shaped with draft to aid in inletting. It will require deburring. Use a #BOLT-L-8-R lock bolt, or any 8-32 or 10-32 lock

Sideplate for a H.E. Leman Indian Trade Rifle, or other style of plains rifle. This 1/2" diameter sideplate has a small square lug that is should be oriented perpendicular to the barrel. Wax cast steel .080" thick the casting is shaped with draft to aid in inletting. It will require deburring. Use a #BOLT-L-8-R lock bolt, or any 8-32 or 10-32 lock

We offer this graceful small sideplate in both right and left hand. Upper edges are slightly beveled. Inlet this sideplate half depth. Use our bolts with 3/8" flat or domed heads which are not recessed. Holes are spaced for L&R's Bailes lock, drill pre cast holes for clearance to accept a 8-32 or 10-32 lock bolts. Overall length 4-5/8", height 7/8"

We offer this graceful small sideplate in both right and left hand. Upper edges are slightly beveled. Inlet this sideplate half depth. Use our bolts with 3/8" flat or domed heads which are not recessed. Holes are spaced for L&R's Bailes lock, drill pre cast holes for clearance to accept a 8-32 or 10-32 lock bolts. Overall length 4-5/8", height 7/8"

We offer this graceful small sideplate in both right and left hand. Upper edges are slightly beveled. Inlet this sideplate half depth. Use our bolts with 3/8" flat or domed heads which are not recessed. Holes are spaced for L&R's Bailes lock, drill pre cast holes for clearance to accept a 8-32 or 10-32 lock bolts. Overall length 4-5/8", height 7/8"

We offer this graceful small sideplate in both right and left hand. Upper edges are slightly beveled. Inlet this sideplate half depth. Use our bolts with 3/8" flat or domed heads which are note recessed. Holes are spaced for L&R's Bailes lock. Left hand. Overall length 4-5/8", height 13/16", thickness 0.120".

We offer this graceful small sideplate in both right and left hand. Upper edges are slightly beveled. Inlet this sideplate half depth. Use our bolts with 3/8" flat or domed heads which are note recessed. Holes are spaced for L&R's Bailes lock. Left hand. Overall length 4-5/8", height 13/16", thickness 0.120".

A right hand sideplate, correct for Bedford County and similar full-stock longrifles. Slightly beveled on upper edges, this sideplate is not made to be inlet flush, but only to half depth. Overall length 4-15/16", height 7/8", thickness 0.120". Holes are spaced for the popular L&R Bedford County flint or percussion lock. Download the appropriate .p

A right hand sideplate, correct for Bedford County and similar full-stock longrifles. Slightly beveled on upper edges, this sideplate is not made to be inlet flush, but only to half depth. Overall length 4-15/16", height 7/8", thickness 0.120". Holes are spaced for the popular L&R Bedford County flint or percussion lock. Download the appropriate .p

Suitable for right or left hand use, this sideplate is correct for a longrifle from Bedford, Fulton, Huntingdon, or Somerset County, and the very similar longrifles by Armstrong, Maryland. This precision cut brass sideplate is made to be inlet flush into the side lock panel. The front two holes are spaced to exactly fit the L&R Bedford percussion o

Suitable for right or left hand use, this sideplate is correct for a longrifle from Bedford, Fulton, Huntingdon, or Somerset County, and the very similar longrifles by Armstrong, Maryland. This precision cut steel sideplate is made to be inlet flush into the side lock panel. The front two holes are spaced to exactly fit the L&R Bedford percussion o