The second production of U.S. Model 1803 rifles used this buttplate, 4-1/4” high, 1-5/8” wide, with a wider bell shaped bottom. 15,703 rifles were made, from 1814 until 1819 using this buttplate. Wax cast of yellow brass, molded from an original. Notched at the side for the patchbox lid, to locate the patchbox, which is a bit longer than the patchb

These fine rifles were hand made to a standard pattern. Three variations are known. The later 1814 variation is more common, and is discussed in the plans. We offer all the castings for all three versions, molded directly from original rifle parts. Using our parts you can restore your fine original rifle, or make a correct replica using our shaped

Our most costly swamped rifle barrel, made in the USA, by L.C. & Liston Rice, Rice Muzzle Loading Rifle Barrels cost a bit more than other barrels, due to the extra attention given to the bore and surfaces. All bores are reamed, rifled, and "ball burnished" to a mirror finish, with a more uniform bore diameter than can be achieved with reaming alon

Our most costly swamped rifle barrel, made in the USA, by L.C. & Liston Rice, Rice Muzzle Loading Rifle Barrels cost a bit more than other barrels, due to the extra attention given to the bore and surfaces. All bores are reamed, rifled, and "ball burnished" to a mirror finish, with a more uniform bore diameter than can be achieved with reaming alon

Create a new barrel assembly for your Thompson Center Hawken rifle, or similar imported Hawken rifle by Investarm, Italy. Our hook will match the tang on your Cabela's, Lyman, or Investarm rifle, with very little hand fitting required. It will not fit replica rifles made in Spain. Tapped for a standard 1/4-28 nipple, order #RST-S Thompson Center d

This English style tang is wax cast of malleable 8620 steel. It may be straightened, or bent cold. Made in 3/4-16 with a .550" thread journal. The overall length of the tang is just over 1-13/16". The groove at the top of the tang resembles those found on British Officer's fusils, and some pre-Revolutionary War era fowling guns. Build your own fli

Our 1770 era 38" swamped barrel is named after Isaac Haines, in honor of this rifle maker from Lancaster County, Pennsylvania. Not well known, recent research indicates that Isaac Haines may have been the most influential artisan in this region. We offer Colerain 38" swamped barrels in three different profiles. The price includes the breech plug, i

Clean your .54 caliber firearm with Track's Cleaning Kit! Clean guns improve accuracy. This terrific set includes everything you need to keep your firearm clean and in fine working order. All accessories in this set feature 10-32 threads. Items include: Cleaning Patches: Bag of 100 pure cotton flannel patches, 2-1/2" in diameter. #Ox-Clean-58-C Bor

Create a new barrel assembly for your Thompson Center Hawken rifle, or similar imported Hawken rifle by Investarm, Italy. Our hook will match the tang on your Cabela's, Lyman, or Investarm rifle, with very little hand fitting required. It will not fit replica rifles made in Spain. Tapped for a standard 1/4-28 nipple, order #RST-S Thompson Center d

Our fowling gun fullstock is an example of our best workmanship, precision pre-inlet and shaped on Allen’s Patent 5 axis pantograph. Inlet for our round faced L&R Queen Anne right hand flint lock, wide fowler buttplate, curled trigger and plate, and any of several triggerguards. The forend is square ahead of the lock panels, to allow easy drilling

Our fowling gun fullstock is an example of our best workmanship, precision pre-inlet and shaped on Allen’s Patent 5 axis pantograph. Inlet for our round faced L&R Queen Anne right hand flint lock, wide fowler buttplate, curled trigger and plate, and any of several triggerguards. The forend is square ahead of the lock panels, to allow easy drilling

Our fowling gun fullstock is an example of our best workmanship, precision pre-inlet and shaped on Allen’s Patent 5 axis pantograph. Inlet for our round faced L&R Queen Anne right hand flint lock, wide fowler buttplate, curled trigger and plate, and any of several triggerguards. The forend is square ahead of the lock panels, to allow easy drilling

Our fowling gun fullstock is an example of our best workmanship, precision pre-inlet and shaped on Allen’s Patent 5 axis pantograph. Inlet for our round faced L&R Queen Anne right hand flint lock, wide fowler buttplate, curled trigger and plate, and any of several triggerguards. The forend is square ahead of the lock panels, to allow easy drilling

Our most costly swamped rifle barrel, made in the USA, by L.C. & Liston Rice, Rice Muzzle Loading Rifle Barrels cost a bit more than other barrels, due to the extra attention given to the bore and surfaces. All bores are reamed, rifled, and "ball burnished" to a mirror finish, with a more uniform bore diameter than can be achieved with reaming alon

Precision machine inlet on a 5 axis pantograph. Our “B" profile stock is pre-inlet for a "B" profile barrel in .40, .45, or .50 caliber. Our “C" profile stock is pre-inlet for a "C" profile barrel in .50, or .54 caliber. Shaped from the lock panels back, the forend is square ahead of the lock panels. A rectangular block from the same blank is inclu

Precision machine inlet on a 5 axis pantograph. Our “C" profile stock is pre-inlet for a "C" profile barrel in .50, or .54 caliber. Shaped from the lock panels back, the forend is square ahead of the lock panels. A rectangular block from the same blank is included, for making a sliding wooden patchbox, accessories, or for testing stains and finishe

Precision machine inlet on a 5 axis pantograph. Our “C" profile stock is pre-inlet for a "C" profile barrel in .50, or .54 caliber. Shaped from the lock panels back, the forend is square ahead of the lock panels. A rectangular block from the same blank is included, for making a sliding wooden patchbox, accessories, or for testing stains and finishe

Precision machine inlet on a 5 axis pantograph. Our “C" profile stock is pre-inlet for a "C" profile barrel in .50, or .54 caliber. Shaped from the lock panels back, the forend is square ahead of the lock panels. A rectangular block from the same blank is included, for making a sliding wooden patchbox, accessories, or for testing stains and finishe

Precision machine inlet on a 5 axis pantograph. Our "C" profile stock is inlet for a heavy weight barrel in .50, or .54 caliber. All are cut for Siler’s large lock, our small Bivins’ buttplate, triggerguard, ramrod rod pipes, and triggerplate for single trigger. We offer a complete set of wax castings in iron or brass, to fit this rifle. Right hand

Precision machine inlet on a 5 axis pantograph. Our "C" profile stock is inlet for a heavy weight barrel in .50, or .54 caliber. All are cut for Siler’s large lock, our small Bivins’ buttplate, triggerguard, ramrod rod pipes, and triggerplate for single trigger. We offer a complete set of wax castings in iron or brass, to fit this rifle. Right hand

Precision machine inlet on a 5 axis pantograph. Our “B” profile stock is pre-inlet for a standard weight barrel in .40, .45, or .50 caliber. Our "C" profile stock is inlet for a heavy weight barrel in .50, or .54 caliber. All are cut for Siler’s large lock, our small Bivins’ buttplate, triggerguard, ramrod rod pipes, and triggerplate for single tri

Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 15/16" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to

Investarms drop-in barrel, .45 caliber with 1-48" twist for a patched round ball. 15/16" octagon by 32" length. Percussion ignition for Investarms produced Lyman Great Plains rifles and Investarms Gemmer Hawken and Plains rifles. The barrel, plug, adjustable rear sight, blade front sight, rib, rod pipes, and underlug are blued. Fully assembled, thi

Investarms drop-in barrel, .45 caliber with 1-48" twist for a patched round ball. 15/16" octagon by 32" length. Flintlock ignition for Investarms produced Lyman Great Plains rifles and Investarms Gemmer Hawken and Plains rifles. The barrel, plug, adjustable rear sight, blade front sight, rib, rod pipes, and underlug are blued. Fully assembled, this

Investarms drop-in barrel, .50 caliber with 1-60" twist for a patched round ball. 15/16" octagon by 32" length. Percussion ignition for Investarms produced Lyman Great Plains rifles and Investarms Gemmer Hawken and Plains rifles. The barrel, plug, adjustable rear sight, blade front sight, rib, rod pipes, and underlug are blued. Fully assembled, thi