Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr

Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr

Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr

Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr

Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr

Pre-fitted plug and tang mating surfaces are machined and finished by L&R, for a snap fit. This well made slant faced flint plug and tang is threaded 5/8-18 with .690" thread journal length and .500" thread engagement for strength. The powder chamber is drilled .375" diameter, over one inch deep, to the center of the octagon extension. The tang swe

Breech Plug, flint style, flared tang, 5/8-18 thread, for 13/16" or 7/8" octagon, made in the USA, milled steel. Tang is about 2-1/4" length. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before drilling the tang screw hole.

Breech Plug, flint style, flared tang, 9/16-18 thread, for 13/16" or 7/8" octagon, made in the USA, milled steel. Tang is about 2-1/4" length. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before drilling the tang screw hole.

Breech Plug, flint style, flared tang, 3/4-16 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 2-1/4" length. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before drilling the tang screw hole.

Breech Plug, flint style, flared tang, 5/8-18 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 2-1/4" length. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before drilling the tang screw hole.

Breech Plug, flint style, flared tang, 9/16-18 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 2-1/4" length. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before drilling the tang screw hole.

Breech Plug, flint style, flared tang, 3/4-16 thread, for 1-1/8" octagon, made in the USA, milled steel. Tang is about 2-1/4" length. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before drilling the tang screw hole.

Breech Plug, flint style, flared tang, 7/8-14 thread, for 1-1/8" octagon, made in the USA, milled steel. Tang is about 2-1/4" length. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before drilling the tang screw hole.

This well made slant faced flint plug and tang is threaded 3/4-16 with .625" thread journal engagement for strength. The powder chamber is drilled .375" diameter, over one inch deep, to the center of the octagon extension. The tang sweeps up to the wood, at both rear corners. Ideally suited for use with L&R's #LOCK-LR-900 right flintlock, or #LOCK-

Breech Plug, flint style, straight tang, 5/8-18 thread, for 13/16" or 7/8" octagon, made in the USA, milled steel. Tang is about 3" length. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before drilling the tang screw hole.

This cleverly designed slant faced plug and tang by L&R Lock Co. is threaded 5/8-18 with .650" thread journal length, and .500" thread engagement for strength. The powder chamber is .315" diameter, ending in a large flash channel which is gently angled to the nipple seat. Most important, the plug and tang mating surfaces are machined flat, for a sn

This cleverly designed slant faced plug and tang by L&R Lock Co. is threaded 3/4-16 with .690" thread journal length, and .500" thread engagement for strength. The powder chamber is .375" diameter, ending in a large flash channel which is gently angled to the nipple seat. Most important, the plug and tang mating surfaces are machined flat, for a sn

Breech Plug, flint style, straight tang, 9/16-18 thread, for 3/4" octagon, made in the USA, milled steel. Tang is about 3" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.

Breech Plug, flint style, straight tang, 9/16-18 thread, for 13/16" or 7/8" octagon, made in the USA, milled steel. Tang is about 3" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.

Breech Plug, flint style, straight tang, 3/4-16 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.

Breech Plug, flint style, straight tang, 3/4-16 thread, with .550" journal length, for 15/16" or 1" octagon. Made in the USA, milled steel. Tang is about 3-1/8" length. This special plug with .550" thread length, is pre-cut to the exact length required by our 20 or 24 gauge, and .54, or .58 caliber rifled octagon-to-round barrel. Bend the tang to m

Breech Plug, flint style, straight tang, 5/8-18 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.

Breech Plug, flint style, straight tang, 9/16-18 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.

Breech Plug, flint style, straight tang, 3/4-16 thread, for 1-1/8" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.

Breech Plug, flint style, straight tang, 7/8-14 thread, for 1-1/8" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.