Wax cast steel, not polished, cut this extra long sight base sight to fit nearly any old dovetail. Cut this sight to fit your rifle, do not enlarge the dovetail slot in your barrel. Made in the U.S.A., the dovetail is about 1.250” length, and the base is .510” wide. Height from the bottom of the dovetail to the top of the sight notch is 0.33".

Original longrifles were nearly always fitted with "fine" (low) sights, in the mistaken belief that the low sights reduced sighting error. Too low for good target work, use it to restore or replicate an original antique rifle. Wax cast with a 1" dovetail, about .535" wide for use on a 13/16" or 7/8" barrel. Dovetail to a depth of .050". Height from

Original longrifles were nearly always fitted with "fine" (low) sights, in the mistaken belief that the low sights reduced sighting error. Too low for good target work, use it to restore or replicate an original antique rifle. Wax cast with a 1" dovetail, about .575" wide for use on a 15/16" or 1" barrel. Dovetail to a depth of .050". Height from t

Wax cast steel, not polished, this traditional style sight is suitable for a long rifle with a 13/16", or 7/8" octagon barrel. This high sight reduces heat mirage, and tilt minimizes glare. Sight has a notch cast in the blade, which can easily be enlarged if necessary. Made in the U. S. A., dovetail to a depth of .050", dovetail is .380" long, and

Wax cast steel, not polished, this traditional style sight is suitable for a long rifle with a 15/16", or 1" octagon barrel. This high sight reduces heat mirage, and tilt minimizes glare. Sight has a notch cast in the blade, which can easily be enlarged if necessary. Made in the U. S. A., dovetail to a depth of .050", dovetail is .375" long, and .5

The California style front sight, made for target shooting, it gives a square post sight picture. The base has a .375" dovetail, about .750" wide. The base is 0.120" thick to be fitted into a .062 to 0.093' deep dovetail (do not dovetail full depth). The .065" thick blade is .365" tall. Shorten the blade to sight-in, as needed. Same day shipment, w

The California style front sight, made for target shooting, it gives a square post sight picture. The base has a .375" dovetail, about .750" wide. The base is 0.120" thick to be fitted into a .062 to 0.093' deep dovetail (do not dovetail full depth). The .065" thick blade is .365" tall. Shorten the blade to sight-in, as needed. Same day shipment, w

This front sight has a polished nickel silver blade with brass base. The rounded silver blade is .270" tall by 0.062" wide. The machined brass dovetail base is .355" long, .750" wide, and .093" deep for fitting to CVA brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail s

This front sight has a polished nickel silver blade with copper base. The rounded silver blade is .270" tall by 0.062" wide. The machined copper dovetail base is .355" long, .750" wide, and .093" deep for fitting to CVA brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail

This front sight has a polished nickel silver blade with brass base. The rounded silver blade is .390" tall by 0.062" wide. The machined brass dovetail base is .355" long, .750" wide, and .093" deep for fitting to CVA brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail s

This front sight has a polished nickel silver blade with copper base. The rounded silver blade is .390" tall by 0.062" wide. The machined copper dovetail base is .355" long, .750" wide, and .093" deep for fitting to CVA brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail

This front sight has a polished nickel silver blade with brass base. The rounded silver blade is .270" tall by 0.062" wide. The machined brass dovetail base is .375" long, .750" wide, and .070" deep for fitting to Davide Pedersoli rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dov

This front sight has a polished nickel silver blade with copper base. The rounded silver blade is .270" tall by 0.062" wide. The machined copper dovetail base is .375" long, .750" wide, and .070" deep for fitting to Davide Pedersoli rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the d

This front sight has a polished nickel silver blade with brass base. The rounded silver blade is .390" tall by 0.062" wide. The machined brass dovetail base is .375" long, .750" wide, and .070" deep for fitting to Davide Pedersoli rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dov

This front sight has a polished nickel silver blade with copper base. The rounded silver blade is .390" tall by 0.062" wide. The machined copper dovetail base is .375" long, .750" wide, and .070" deep for fitting to Davide Pedersoli rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the d

This blade front sight has a pointed oval base with concave inner surface. File the extra high blade to the perfect sight picture. Solder it to your round barrel, typically 1-1/2" to 2-1/2" or more behind the muzzle. Sight blade is .080" wide and stands .345" above the plane of the barrel. Base is 0.86" long by 0.41" wide. Cast brass.

This blade front sight has a pointed oval base with concave inner surface. File the extra high blade to the perfect sight picture. Solder it to your round barrel, typically 1-1/2" to 2-1/2" or more behind the muzzle. Sight blade is .080" wide and stands .345" above the plane of the barrel. Base is 0.86" long by 0.41" wide. Cast steel.

Wax cast, not polished, this small sight has a tall blade, made to be shortened during sight-in. It is an ideal casting for a H.E. Leman Indian Trade Rifle front sight or other styles of rifles, or pistols. Base is .375" long, .520" wide, .062" deep. The blade is .300" tall, .062" at the base tapering to .040". Cast brass.

Wax cast, not polished, this small sight has a tall blade, made to be shortened during sight-in. It is an ideal casting for a H.E. Leman Indian Trade Rifle front sight or other styles of rifles, or pistols. Base is .375" long, .520" wide, .062" deep. The blade is .300" tall, .062" at the base tapering to .040". Cast steel.

This front sight has a polished silver blade with brass base. The rounded silver blade is .275" tall by 0.062" wide. The machined brass dovetail base is .354" long, .750" wide, and .062" deep for fitting to Lyman brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail slight

This front sight has a polished silver blade with copper base. The rounded silver blade is .275" tall by 0.062" wide. The machined brass dovetail base is .354" long, .750" wide, and .062" deep for fitting to Lyman brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail sligh

This front sight has a polished silver blade with brass base. The rounded silver blade is .390" tall by 0.062" wide. The machined brass dovetail base is .354" long, .750" wide, and .062" deep for fitting to Lyman brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail slight

This front sight has a polished silver blade with copper base. The rounded silver blade is .390" tall by 0.062" wide. The machined brass dovetail base is .354" long, .750" wide, and .062" deep for fitting to Lyman brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail sligh

A wax cast steel front sight for the Invest Arms produced Lyman Great Plains & Gemmer Hawken Rifle. This blade front sight is identical to the factory fitted sight on the Lyman rifles. The dovetail fits a metric slot measuring .345" long, .650" wide, and .062" deep. The as cast blade is .120" thick, standing .325" above the base. Available in blued

Called a "turtle" because it seems to have four legs extended from the oval blade. We also offer a similar sight with longer legs called "spider" sights. This sight is approximately 1/2" long by 3/8" wide. The tiny blade measures .045" wide by .210" tall. Wax cast brass.