If you are inletting parts into walnut, dark colored or stained wood, you may prefer this light gold pigment in a grease base that won't dry out. Use sparingly. Our 1/2 ounce jar should serve you for years.

Pure linseed oil, specially refined to dry in just 2 to 6 hours to a tough, hard, easy-to-touch-up finish. So simple to use. Apply stain (if desired) and follow with finger-dunks of Lin-Speed. Smooth out with the heel of your hand and set aside to dry. First coat will "freeze" sanding whiskers for easy removal with 3/0 steel wool, ending time consu

Mark Lee - Slow Rust Blue #3, 4 fluid ounce bottle. Give your rifle the classic beauty and durability of a rust blue finish, for use with steel or twist barrels.

Mark Lee - Express Blue #1, 4 fluid ounce bottle for use on steel. Noted gunmaker and author John Bivins is quoted "Gunmakers, both centerfire and muzzleloader alike, have long needed a bluing solution which could be used with a minimum of amount of equipment, time, mess and hazard, which would produce a lustrous "true" blue. Traditional slow-rust

Mark Lee - Express Brown #2, 4 fluid ounce bottle for use on steel and Damascus barrels. This is a hot browning solution that quickly produces a durable fine traditional brown finish.

Solder & Flux, Stay-Brite brand, higher strength, low 430 degree melting point. Includes 1/2 ounce of solder, and flux. StayBright solder is a lead free alloy of tin and silver. Use our Birchwood Casey's Blue Pen, #BC-PSP to mask off solder free borders.

Solder ferrous and non-ferrous metals, flows at 430 F, provides strength without the distortion of high temperature brazing. No mess, no waste syringe. Works with heat of a torch or soldering iron. Flux is blended-in. No additinal flux required. Low melting point, flows smoothly at 430 F, remelts at 650 F.

Tix brand Anti-Flux, 1/2 ounce bottle.

Tix flux is non-corrosive, works with soft solder with melting temperatures under 450°. Be sure to order flux and anti-flux, each sold separately.

The hardest soft solder. Melts at 275° F (100° below lead solder) has a very high bond strength. No cadmium or bismuth, never tarnishes. Tix flux is non-corrosive, works with soft solder with melting temperatures under 450°. Be sure to order flux and anti-flux, each sold separately.

This formula was documented by Zischang, the famous early gunsmith. Commonly used by early gunsmiths, it is reproduced by Track.. It is the best cold rust method of producing a very rich dark brown color on iron or steel. No heat is used, no mercury compounds. Safe for soldered ribs and shotgun barrels. Use degreaser before application. The brown f

Includes 1 bottle of Track's own Aquafortis stock stain and 1 bottle of barrel browning solution. 2 oz. each.

Solid brass bar stock, ideal for making knife hilts, pommels, guards, spacers, inlays, buttplates, or any other project that needs a heavier hunk of brass.

Solid brass bar stock, ideal for making knife hilts, pommels, guards, spacers, inlays, buttplates, or any other project that needs a heavier hunk of brass.

Solid brass bar stock, ideal for making knife hilts, pommels, guards, spacers, inlays, buttplates, or any other project that needs a heavier hunk of brass.

The Paring Knife Blade is easily assembled. Features a 3" blade, with a 7" overall length. Forged from .050" thick carbon cutlery steel by America's oldest cutlery, Russell Green River. Properly tempered to sharpen quickly and hold an edge. Looking for a matching sheath? The sheaths listed below will fit this blade nicely.

The sheep Skinner Blade, is a authentic early skinner. Features a 5-1/4" blade, with a 9-3/4" overall length. Forged from .138" thick carbon cutlery steel, properly tempered to sharpen quickly and hold an edge. This blade has a 5-1/4" edge, correctly forged from .138" thick carbon cutlery steel, not modern stainless steel. Not an imported copy, thi

Brass pin stock may be used to secure rod pipes and barrel lugs to the gun stock. We prefer to use 3/32" steel dowel pins for pinning the barrel, and trigger. Brass pins are also useful in knife building.

Solid brass cutler pins for attaching knife handles, hinges or any other pin application. Pins are 2" long by 1/8" diameter. Pack of 10.

Solid brass cutler pins for attaching knife handles, hinges or any other pin application. Pins are 2" long by 1/8" diameter. Pack of 3.

Brass pin stock may be used to secure rod pipes and barrel lugs to the gun stock. We prefer to use 3/32" steel dowel pins for pinning the barrel, and trigger. Brass pins are also useful in knife building.

Solid brass rod in a variety of diameters for making tips, jags, thimbles, adaptors, starters, and turning for knives. Sold in 8 to 9" random lengths.

Solid brass rod in a variety of diameters for making tips, jags, thimbles, adaptors, starters, and turning for knives. Sold in 8 to 9" random lengths.

Solid brass rod in a variety of diameters for making tips, jags, thimbles, adaptors, starters, and turning for knives. Sold in 6" lengths.

Solid brass rod in a variety of diameters for making tips, jags, thimbles, adaptors, starters, and turning for knives. Sold in 8 to 9" random lengths.