T/C New Englander Rifle,
.50 caliber, 26" barrel,
percussion, walnut, iron trim,
used, by Thompson Center Arms






This .50 caliber Thompson Center New Englander Rifle has a 26" tapered round barrel to reduce muzzle weight. The bore is rifled with a 1 in 48" twist for a patched round ball, or T/C Maxi ball. The bore is bright, clean, and ready to shoot. We recommend our .490" round ball, .015" lubricated patch over a charge of 70 grains of GOEX FFg black powder. Or the modest twist can be used with a conical Thompson Center Maxi-ball. This rifle is fitted with the factory v-rear sight that is adjustable for both windage and elevation, and a T/C bead front sight is dovetailed directly behind the muzzle. We note the top back of both sights have been painted white for better visibility.
The American black walnut stock is factory finished. The stock has only a few minor handling marks from normal field use. The buttplate is blued steel, to match the triggerguard. The triggerguard has a wide bow to allow easy access to the single trigger with a gloved hand. The single lock bolt has a blued steel washer style side plate. The factory black synthetic ramrod has blued steel tips with 10-32 threads. The buttstock is fitted with a sling swivel stud, and an additional stud is fitted to the rear ramrod pipe. No sling is included with this rifle.
The hooked breech allows the barrel to be easily dismounted for cleaning without risk of wetting the stock with water containing black powder residue. To dismount the barrel, put the lock on half cock, withdraw the ramrod, drift the key past the underlug, and the barrel can be lifted from the barrel channel for ease of cleaning. Remove the nipple and place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by an oily patch. Dry and oil the exterior then reassemble the rifle.
Our lock view shows the color case hardened percussion lock, factory engraved by Thompson Center. The lock plate has vibrant colors. The breech is fitted with a 1/4-28 threaded stainless steel nipple. This lock works smoothly, with a strong mainspring, and fly detent. The single trigger provides a smooth release of the lock.
This New Englander has a bright bore and is ready to shoot. It was a trusty hunting companion for many years by its previous owner, and it is ready for another chapter of new hunting adventures in the deep woods! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique
Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.
Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.
Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.
- Cone length: 0.440"
- Thread journal length: 0.195"
- Overall length: 0.635"
- Diameter of base: 0.307"
- Cone length: 0.440"
- Thread journal length: 0.195"
- Overall length: 0.635"
- Diameter of base: 0.307"
- Cone length 0.440"
- Overall length: 0.635"
- Thread journal length: 0.195"
- Diameter of base: 0.307"