This Remington Rolling Block rifle was built by Davide Pedersoli of Italy. The 30" octagon barrel is chambered for the long lasting and ever popular .45-70 Government round. Stocked in walnut, the rifle has a pressed checkered pistol grip and schnabel forend. The rifle is used with a repaired wrist and refinished stock. The rifle is fitted with a 6x William Malcolm telescope. With an overall weight of 12.05 pounds this rifle is best suited for its intended purpose, as a match rifle. The trigger reach of 14-1/2 inches combines with the weight to make this rifle suitable only for today's larger sized shooter, someone over 6' in height. We have this rifle on display, ready for same day shipment on receipt of your funds and signed copy of your favorite dealer's FFL license.
Our front view shows the Sporting Rifle buttplate, single trigger, and classic appearance of the Remington Number 1 Rolling Block Action, as replicated by Davide Pedersoli. Much stronger than a Trapdoor Springfield, the factory recommends shooting factory ammunition, but we prefer black powder hand loads, for economy, accuracy, compliance with club match rules, and the pleasure of doing it the old way. The walnut stock has been refinished to a medium brown with semi-gloss finish. The right side of the wrist has two repaired cracks extending back from receiver and the upper tang inlet has been glass bedded. We also note a large gap all the way around the wrist where the buttstock meets the receiver. The tang is drilled and tapped for a tang sight. No tang sight is included. The blued buttplate stands slightly proud of the wood, and we note a small chip in the stock at the tip of the comb extension.
Measuring 30" in length the octagon barrel has a bright clean bore that has been well maintained. The left quarter flat of the barrel is marked with the Pedersoli model markings and caliber. The bottom flat is marked Dixie Gun Work / Tennessee in two lines just ahead of the forearm. The telescope is marked Wm Malcolm 6x and has a 3/4" diameter blued steel tube that measures 35" long end-to-end. The ends are threaded for brass dust caps. The Pedersoli rear scope mount is adjustable for both windage and elevation.
The Number 1 action has a grooved face on the hammer spur and breech block spur. This single shot rifle has a strong mainspring, yet a smooth crisp trigger release. It will be enjoyable to shoot. This is a replica of the later style Number 1 action, with rotary extractor, for positive cartridge extraction. The hammer and breech block are blued steel. Color case hardened the action is a blue background with various swirls of gray and purple coloration. Made with near perfect symmetry, only the finger spur of the breech block is offset to the right. Thus, this rifle is equally comfortable for a right or left hand shooter.
The bore is clean and bright, in perfect condition. This rifle will require load development, and fine tuning, for serious target competition. We enjoy casting bullets, hand loading black powder cartridges, and enjoyable afternoons at our local 100, 200, 400, and 600 yard range. If you enjoy shooting, recording results, and creating loads, order this rifle, today. This rifle qualifies for FFL transfer and can be picked up by a Minnesota resident, or it must be shipped to a FFL dealer in another state. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Ready for same day shipment on receipt of your funds, and your Federal Firearms Licensed dealer's signed FFL
copy. We
must deliver to a Minnesota resident, or to a licensed dealer in any other state.
Search for a FFL Transfer
Dealer in your area.
Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities,
then click CHECK OUT. Enter your name, address, and billing information for prompt shipment.
Or, PRINT your order after entering your address, attach your check or money order, and send it by mail.
Shipping cost is displayed after you enter your address.
Our web site displays actual in stock status, up-to-the-minute price, and
shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost
for extra long or heavy parcels are determined after we weigh the parcel.
Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted.
Postage is your only risk.
Rolling Block Rifle,
caliber .45-70 Government, 30" octagon barrel,
checkered walnut, repaired wrist, pistol grip, Malcolm telescope,
used, by Davide Pedersoli & Co.
|
Availability:
|
|
|
Price:
|
$1,349.00
|
Special Restrictions Apply
Not available for export outside the U.S.A.
Must be delivered to a Federal Firearms Licensed dealer.
A signed copy of your dealer's FFL license is required before shipment.
SPG Black Powder Cartridge Reloading Primer,
revised 9th edition, 20 plus new pages
by Mike Venturino & Steve Garbe
|
Availability:
|
|
|
Price:
|
$34.95
|
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
|
Availability:
|
|
|
Price:
|
$4.59
|
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
|
Availability:
|
|
|
Price:
|
$3.99
|
Bore brush, bronze, for .45 caliber, 10-32 thread
|
Availability:
|
|
|
Price:
|
$4.29
|
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
each piece, no minimum order
|
Availability:
|
|
|
Price:
|
$0.70
|
Special Restrictions Apply
Not available for export outside the U.S.A.
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
50 pieces
|
Availability:
|
|
|
Price:
|
$34.00
|
Special Restrictions Apply
Not available for export outside the U.S.A.
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
100 pieces
|
Availability:
|
|
|
Price:
|
$65.00
|
Special Restrictions Apply
Not available for export outside the U.S.A.
Neck Expander Plug,
.457" diameter,
to fit our
Lee 7/8-14 die
|
Availability:
|
|
|
Price:
|
$3.99
|
Neck Expander Plug,
.458" diameter,
to fit our
Lee 7/8-14 die
|
Availability:
|
|
|
Price:
|
$3.99
|
Neck Expander Plug,
.459" diameter,
to fit our
Lee 7/8-14 die
|
Availability:
|
|
|
Price:
|
$3.99
|
Neck Expander Plug,
.460" diameter,
to fit our
Lee 7/8-14 die
|
Availability:
|
|
|
Price:
|
$3.99
|
Neck Expander Plug,
.461" diameter,
to fit our
Lee 7/8-14 die
|
Availability:
|
|
|
Price:
|
$3.99
|
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
|
Availability:
|
|
|
Price:
|
$4.59
|
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
|
Availability:
|
|
|
Price:
|
$45.99
|
Lee Bullet Mold .45-70 caliber, .457" diameter, 340 grain, flat nose, solid base BPCR mold, double cavity
|
Availability:
|
|
|
Price:
|
$36.99
|
Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity
|
Availability:
|
|
|
Price:
|
$36.99
|
Lee Bullet Mold .45-70 caliber, .457" diameter, 450 grain, flat nose, solid base BPCR mold, double cavity
|
Availability:
|
|
|
Price:
|
$36.99
|
Lee Bullet Mold .45-70 caliber, .457" diameter, 500 grain, flat nose, solid base BPCR mold, double cavity
|
Availability:
|
|
|
Price:
|
$36.99
|
LEE Classic Cast Reloader Press,
for pistol or rifle cartridges
|
Availability:
|
|
|
Price:
|
$210.99
|
Lee Liquid Alox, 4 oz. bottle
|
Availability:
|
|
|
Price:
|
$7.99
|
Special Restrictions Apply
Not available for export outside the U.S.A.
Only ground shipping to a physical street address in the continental 48 states. Can not be shipped to a P.O. Box.
LEE Loading Dies,
caliber .45-70 Gov't,
including shell holder
|
Availability:
|
|
|
Price:
|
$46.99
|
LEE Neck Expander Die,
7/8-14 thread,
for our neck expander plugs
or powder compression plugs,
each sold separately
|
Availability:
|
|
|
Price:
|
$15.29
|
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
|
Availability:
|
|
|
Price:
|
$23.59
|
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
|
Availability:
|
|
|
Price:
|
$4.99
|
SPG Bullet Lubricant,
one 1-1/4 ounce stick, for Black or Smokeless Powder
|
Availability:
|
|
|
Price:
|
$5.95
|
Bullet Mold,
.457" diameter, 330 grain hollow point mold,
single cavity steel mold blocks,
by Lyman
|
Availability:
|
|
|
Price:
|
$102.99
|
Bullet Mold,
.457" diameter, 385 grain bullet mold,
single cavity steel mold blocks,
by Lyman
|
Availability:
|
|
|
Price:
|
$102.99
|
Bullet Mold,
.457" diameter, 500 grain bullet mold,
single cavity steel mold blocks,
by Lyman
|
Availability:
|
|
|
Price:
|
$102.99
|
Bullet Mold,
.457" diameter, 535 grain bullet mold,
single cavity steel mold blocks,
by Lyman
|
Availability:
|
|
|
Price:
|
$102.99
|
Bullet Mold,
.457" diameter, 292 grain bullet mold,
single cavity steel mold blocks,
by Lyman
|
Availability:
|
|
|
Price:
|
$102.99
|
Bullet Mold,
.457" diameter, 405 grain bullet mold,
single cavity steel mold blocks,
by Lyman
|
Availability:
|
|
|
Price:
|
$102.99
|
Bullet Mold,
.457" diameter, 400 grain bullet mold,
single cavity steel mold blocks,
by Lyman
|
Availability:
|
|
|
Price:
|
$102.99
|
Bullet Mold,
.457" diameter, 500 grain bullet mold,
Schmittzer pointed bullet,
single cavity steel mold blocks,
by Lyman
|
Availability:
|
|
|
Price:
|
$102.99
|
Case Lube,
2 oz. bottle, by Lyman
|
Availability:
|
|
|
Price:
|
$7.99
|
Case Lube Pad,
by Lyman
|
Availability:
|
|
|
Price:
|
$9.99
|
Lyman Three Die Set,
for .45-70 Government
|
Availability:
|
|
|
Price:
|
$69.99
|
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
|
Availability:
|
|
|
Price:
|
$55.25
|
.457" Sizing & Lube die,
by Lyman
|
Availability:
|
|
|
Price:
|
$40.19
|
.458" Sizing & Lube die,
by Lyman
|
Availability:
|
|
|
Price:
|
$40.19
|
.459" Sizing & Lube die,
by Lyman
|
Availability:
|
|
|
Price:
|
$40.19
|
Shell holder #17,
by Lyman,
fits .40-65 & .45-70 to .45-120
|
Availability:
|
|
|
Price:
|
$10.19
|
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
|
Availability:
|
|
|
Price:
|
$4.49
|