Breech Plug with integral nipple, for Thompson Center Scout carbine, rifle, or pistol, to fit No. 11 CCI cap. The vent holes are designed to "index" and align exactly with the vent holes in your T/C Scout frame. Made in the USA, of 416 alloy Martensitic (hardenable) stainless steel. TC part number 7231 This breech plug will fit the Thompson Center

Breech Plug with integral nipple, for early production Thompson Center Scout carbine, rifle, or pistol, to fit No. 11 CCI cap. This is the earlier production style and has a much shorter length and does not have the integral vent holes found on the later examples. We do not have a serial number cut-off for the design change. Made in the USA, of 416

Made of stainless steel, with a 1/4" square lug for a nipple wrench. "O" ring, and a large hole for better flushing action. Nipple end turned for 3/16" tubing, included.

Nipple: 1/4-28 thread ~Hot Shot® for Thompson Center Hawken & other popular guns~ No. 11 CCI cap, stainless steel Use the Specifications Tab above the image and look under Brand of Manufacturer to see recommended models this nipple fits. Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"

Nipple: 1/4-28 thread ~short factory replica for Thompson Center rifles~ No. 11 CCI cap, stainless steel Use the Specifications Tab above the image and look under Brand of Manufacturer to see recommended models this nipple fits. Cone length: 0.300" Thread journal length: 0.200" Overall length: 0.500" Diameter of base: 0.307"

Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! This well tempered nipple wrench has two sturdy fingers

Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! Our most popular wrench, light enough to fit in your po

Nipple: 12-28 thread~Thompson Center Seneca & Cherokee rifles, and Patriot pistol~ No. 11 CCI cap, stainless steel. Use nipple wrench #NW-170 Use the Specifications Tab above the image and look under Brand of Manufacturer to see recommended models this nipple fits. Cone length: 0.300" Thread journal length: 0.200" Overall length: 0.500" Diameter of

Nipple: 1/4-28 thread ~Standard Rifle~ musket cap, hardened steel. Requires #NW-100 musket nipple wrench. Use the Specifications Tab above the image and look under Brand of Manufacturer to see recommended models this nipple fits. Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"

Nipple: 1/4-28 thread ~Standard Rifle~ musket cap, stainless steel. Requires #NW-100 musket nipple wrench. Use the Specifications Tab above the image and look under Brand of Manufacturer to see recommended models this nipple fits. Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"

Nipple: 1/4-28 thread ~Standard Rifle~ No.11 CCI cap, hardened steel, square shank, ideal for restoration Use the Specifications Tab above the image and look under Brand of Manufacturer to see recommended models this nipple fits. Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"

Nipple: 1/4-28 thread ~Standard Rifle~ No. 11 CCI cap, stainless steel Use the Specifications Tab above the image and look under Brand of Manufacturer to see recommended models this nipple fits. Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"

Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! Our smallest socket wrench has a .3/8" body tapering do

Create a new barrel assembly for your Thompson Center Hawken rifle, or similar imported Hawken rifle by Investarm, Italy. Our hook will match the tang on your Cabela's, Lyman, or Investarm rifle, with very little hand fitting required. It will not fit replica rifles made in Spain. Tapped for a standard 1/4-28 nipple, order #RST-S Thompson Center do

Create a new barrel assembly for your Thompson Center Hawken rifle, or similar imported Hawken rifle by Investarm, Italy. Our hook will match the tang on your Cabela's, Lyman, or Investarm rifle, with very little hand fitting required. It will not fit replica rifles made in Spain. Tapped for a standard 1/4-28 nipple, order #RST-S Thompson Center do

Investarms drop-in barrel, .45 caliber with 1-48" twist for a patched round ball. 15/16" octagon by 28" length. Percussion ignition for Investarms produced Hawken, also sold as Bridger Hawken, Cabela's Hawken, will also fit the Lyman Trade rifles. The barrel, plug, adjustable rear sight, bead front sight, rib, and underlug are blued. Ramrod pipes a

Investarm drop-in barrel, .50 caliber with 1-48" twist for a patched round ball. 15/16" octagon by 28" length. Percussion ignition for Investarm produced Hawken, also sold as Bridger Hawken, Cabela's Hawken, and Lyman Trade rifles. The barrel, plug, adjustable rear sight, bead front sight, rib, and underlug are blued. Ramrod pipes are brass. Fully

Investarm drop-in barrel, .54 caliber with 1-48" twist for a patched round ball. 15/16" octagon, 28" length. Percussion ignition for Investarm produced Hawken, also sold as Bridger Hawken, Cabela's Hawken, and Lyman Trade rifle. The barrel, plug, adjustable rear sight, bead front sight, rib, and underlug are blued. Ramrod pipes are brass. Fully ass

Thompson Center barrel assembly for T/C New Englander rifle, 50 caliber with 1 in 48" rate of twist, 26" barrel. Percussion hooked breech, stainless steel nipple, underlug, rib, ramrod pipes, patridge front sight, early style adjustable rear sight. Factory wooden ramrod with blued steel tips. In excellent used condition with a bright bore.

This clever cap dispenser was designed in the late percussion era. Patterned after one shown in The Muzzle Loading Caplock Rifle, by Ned Roberts, this replica is about 3-1/2" long. A slotted arm rotates, to allow the hinged lid to open wide, for easy refill. When filled, gravity draws caps to the lower end, but keeps them dry and protected, out of

The inside mounted frizzen screw on a Thompson Center flintlock requires a longer frizzen screw with a nut to mount a flash guard. Installation of a iron or brass flash guard, protects the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enactments, where flint shooters may stand and fire volley

A hammer for a percussion lock by Thompson Center, for their Hawken, Renegade, New Englander, White Mountain Carbine, and Pennsylvania Hunter models. The photo is representative! This used hammer is in very good condition. Right hand, the hammer is factory engraved, and color case hardened. This is the late style hammer, with a curled finger spur,

Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 1/4-28, made in the USA, stainless steel, slotted for easy removal. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly above the pan to frizzen joi

Our 29" Creedmoor Rifle Loading and Cleaning Rod is made in the U.S.A. from 5/16" diameter 416 stainless steel. Ideal for heavy duty cleaning, this is our strongest rod for pulling a stuck ball. This cleaning rod includes a brass rod guide-muzzle protector and wood handle. This sturdy cleaning rod is suitable for .32 caliber and the brass guide cen

This left Hawken halfstock rifle is stocked in walnut and trimmed in iron furniture. The walnut stock is finished dark and the iron furniture is fire blued. Assembled around a .54 caliber tapered octagon barrel, this plains rifle will be ideal for large game hunting, or silhouette match use. Trigger reach is 14", to fit a 6" or taller shooter. This