Your search for '策妄阿拉布坦'
returned
5,665 results.
|
Taps , high carbon steel, 1/4-20 thread
Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal
|
|
|
Taps , high carbon steel, 1/4-28 thread
Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch. Taper taps have eight to ten threads chamfered to start and cut thread
|
|
Taps , high carbon steel, 1/4-32 thread
This special thread is used almost exclusively for the 1/4-32 White Lightnin' touch hole liners, where fine threads allow a larger inside cavity. It is also used to refresh the threads of older Numrich Arms underhammer rifles, and Hopkins & Allen percussion longrifles. Our special nipples with long shanks for underhammer rifles are also threaded 1/
|
|
|
Taps , high carbon steel, 5/16-18 thread
Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch. Taper taps have eight to ten threads chamfered to start and cut thread
|
|
|
Taps , high carbon steel, 5/16-24 thread
Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch. Taper taps have eight to ten threads chamfered to start and cut thread
|
|
|
Taps , high carbon steel, 5/16-32 thread
Used almost exclusively for the 5/16-32 White Lightnin touch hole liner. Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch
|
|
Tap , high carbon steel, 3/4-16 thread, bottom tap
Tap, high carbon steel, 3/4-16 thread, bottom tap. Tap Drill: for 3/4-16 thread, use fractional Drill-11/16 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a special alloy made to retain an edge at "high spee
|
|
|
Tap , high carbon steel, 3/4-16 thread, plug tap
Tap, high carbon steel, 3/4-16 thread, plug tap. Tap Drill: for 3/4-16 thread, use fractional Drill-11/16 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a special alloy made to retain an edge at "high speed"
|
|
|
Tap , high carbon steel, 3-48 thread, plug tap
Tap, high carbon steel, 3-48 thread, plug tap Tap Drill: for 3-48 thread, use No. Drill-47 Clearance Drill: for 3-48 thread, use No. Drill-37 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a special alloy
|
|
|
Taps , high carbon steel, 3/8-16 thread
Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch. Taper taps have eight to ten threads chamfered to start and cut thread
|
|
|
Taps , high carbon steel, 3/8-24 thread
Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch. Taper taps have eight to ten threads chamfered to start and cut thread
|
|
|
Taps , high carbon steel, 3/8-32 thread
Used almost exclusively for the 3/8-32 White Lightnin touch hole liner. Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch.
|
|
|
Tap , high carbon steel, 3/8-16 thread, bottom tap
Tap, high carbon steel, 3/8-16 thread, bottom tap Tap Drill: for 3/8-16 thread, use fractional Drill-5/16 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a special alloy made to retain an edge at "high speed"
|
|
|
Tap , high carbon steel, 3/8-16 thread, plug tap
Tap, high carbon steel, 3/8-16 thread, plug tap Tap Drill: for 3/8-16 thread, use fractional Drill-5/16 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a special alloy made to retain an edge at "high speed" (
|
|
Tap , high carbon steel, 3/8-16 thread, taper tap
Tap, high carbon steel, 3/8-16 thread, taper tap Tap Drill: for 3/8-16 thread, use fractional Drill-5/16 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a special alloy made to retain an edge at "high speed"
|
|
|
Tap , high carbon steel, 3/8-24 thread, bottom tap
Tap, high carbon steel, 3/8-24 thread, bottom tap Tap Drill: for 3/8-24 thread, use Letter Drill-#Q We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a special alloy made to retain an edge at "high speed" (i.e.
|
|
|
Tap , high carbon steel, 3/8-24 thread, plug tap
Tap, high carbon steel, 3/8-24 thread, plug tap Tap Drill: for 3/8-24 thread, use Letter Drill-#Q We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a special alloy made to retain an edge at "high speed" (i.e. w
|
|
|
Tap , high carbon steel, 3/8-24 thread, taper tap
Tap, high carbon steel, 3/8-24 thread, taper tap Tap Drill: for 3/8-24 thread, use Letter Drill-Q We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a special alloy made to retain an edge at "high speed" (i.e. w
|
|
|
Tap , high carbon steel, 3/8-32 thread, plug tap
Tap , high carbon steel, 3/8-32 thread, plug tap Tap Drill: for 3/8-32 thread use Letter Drill-Q We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a special alloy made to retain an edge at "high speed" (i.e. w
|
|
|
Tap , high carbon steel, 4-40 thread, bottom tap
Tap, high carbon steel, 4-40 thread, bottom tap. Tap Drill: for 4-40 thread, use No. Drill-43 Clearance Drill: for 4-40 thread, use No. Drill-32 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a special all
|
|
|
Tap , high carbon steel, 4-40 thread, plug tap
Tap, high carbon steel, 4-40 thread, plug tap. Tap Drill: for 4-40 thread, use No. Drill-43 Clearance Drill: for 4-40 thread, use No. Drill-32 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a special alloy
|
|
|
Tap , high carbon steel, 4-40 thread, taper tap
Tap, high carbon steel, 4-40 thread, taper tap. Tap Drill: for 4-40 thread, use No. Drill-43 Clearance Drill: for 4-40 thread, use No. Drill-32 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a special allo
|
|
|
Tap , high carbon steel, 5/16-18 thread, bottom tap
Tap, high carbon steel, 5/16-18 thread, bottom tap. Tap Drill: for 5/16-18 thread, use Letter Drill-F Clearance Drill: for 5/16-18 thread, use Letter Drill-Q We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is
|
|
|
Tap , high carbon steel, 5/16-18 thread, plug tap
Tap, high carbon steel, 5/16-18 thread, plug tap. Tap Drill: for 5/16-18 thread, use Letter Drill-F Clearance Drill: for 5/16-18 thread, use Letter Drill-Q We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a
|