Brown Bess Swivel , narrow for 1746 First Model triggerguard, wax cast steel includes 6-40 screw Molded directly from an original 1746 Willits marked Brown Bess musket. This swivel is drilled and tapped for a 6-40 screw. You will need to deburr the casting gate and polish. The inside mount is approximately 3/4" wide to fit the front bow of your triggerguard. Swivel is about 2" wide at the at the widest point. Wax cast steel, made in the U.S.A.       SWIVEL-46-N . . . $13.99

Brown Bess Swivel , wide for 1746 First Model forearm, wax cast steel includes 6-40 screw Our wide 1746 Willits Brown Bess front swivel is drilled, tapped and includes a 6-40 screw. Wide enough for early rifles, fowlers, and muskets, it may be bent and reformed to fit nearly any forend, including wide forends. Remove the casting gate, polish, and hang this swivel from an underlug securely attached to the barrel. Swivel is about 1-5/64"       SWIVEL-46-W . . . $13.99

Swivel , narrow for triggerguard, includes 6-40 screw, wax cast steel The narrow swivel mounts to the thick lug at the front of your trigger bow. Uses 6-40 screw, included with the swivel. Order #SCREW-4N, if you need a replacement screw. Swivel is 5/16" wide inside dimension at the mounts. Swivel will accept a sling up to 1-1/4" wide.       SWIVEL-4-N . . . $12.99

Swivel wide for forend, includes 6-40 screw, wax cast steel The wide swivel mounts on the forend of the fullstock and should be positioned to rest against a ramrod pipe body. The screw should be installed through a underlug dovetailed into the bottom flat of the barrel such as a #UL-DH-1, sold separately. Uses a 6-40 screw, included with the swivel. Order #SCREW-UL-6-40, if you need a replacement. Swivel is       SWIVEL-5-W . . . $12.99

Fancy Button Sling Stud, 7/8" head diameter The button sling stud has a fancy rosette design and crossed screw slots cast into the head. Remove the casting gate (sprue) at the tip, grinding or filing away the extra metal to complete the thread at the tip. Install this button stud, typically two or three inches behind the triggerguard's rear finial. Select a sling such as our #SLING-JAEG-L or       SWIVEL-6-B . . . $13.99

Plain Button Sling Stud, 3/4" diameter head, screw driver slot for installation The plain button sling stud is appropriate for Germanic rifles and fowling guns. The 3/4" diameter head has a screw driver slot for installation. Overall length is 1-1/8". Tapered screw thread as found on many antiques. We recommend drilling a pilot hole with a #DRILL-14 (.182") drill bit.       SWIVEL-7-B . . . $4.99

Swivel Post Stud, 7/16" ball head drilled for narrow swivel The 7/16" diameter head of the post sling stud has been thinned to 5/16" width and cross drilled to mount our narrow swivel, #SWIVEL-4-N. Tapered screw thread as found on many antiques. We recommend drilling a pilot hole with a #DRILL-14 (.182") drill bit when installing this in the stock.       SWIVEL-POST . . . $7.50

Swivel , early U shaped for forend, includes 6-40 mounting screw, wax cast steel The "U" shaped swivel mounts on the forend of the fullstock and should ideally rest against a ramrod pipe to prevent blocking the ramrod channel. The screw should be installed through a underlug dovetailed into the bottom flat of the barrel such as a #UL-DH-1, sold separately. Uses a 6-40 screw, included with the swivel. Swivel is over 15/16" wide       SWIVEL-UL . . . $12.99

Tacks, antiqued plated brass, 1/4" diameter cone shaped, per 100 Tacks, antiqued plated brass, 1/4" diameter cone shaped, per 100. The shank is approximately 7/16" long.       TACK-CS-4-A . . . $6.99

Tacks, polished plated brass, 1/4" diameter cone shaped, per 100 Tacks, polished plated brass, 1/4" diameter high domed, per 100. The shank is approximately 7/16" long.       TACK-CS-4-B . . . $6.99

Tacks, antiqued plated brass, 1/4" diameter high domed, per 100 Tacks, antiqued plated brass, 1/4" diameter high domed, per 100. The steel shank is approximately 1/2" long.       TACK-HD-4-A . . . $6.99

Tacks, polished plated brass, 1/4" diameter high domed, per 100 Tacks, polished plated brass, 1/4" diameter high domed, per 100. The steel shank is approximately 1/2" long.       TACK-HD-4-B . . . $6.99

Tacks, antiqued plated brass, 3/8" diameter high domed, per 100 Tacks, antiqued plated brass, 3/8" diameter high domed, per 100. The steel shank is approximately 3/8" long.       TACK-HD-6-A . . . $8.59

Tacks, polished plated brass, 3/8" diameter high domed, per 100 Tacks, polished plated brass, 3/8" diameter high domed, per 100. The steel shank is approximately 3/8" long.       TACK-HD-6-B . . . $8.59

Tacks, antiqued plated brass, 1/2" diameter high domed, per 100 Tacks, antiqued plated brass, 1/2" diameter high domed, per 100. The steel shank is approximately 7/16" long.       TACK-HD-8-A . . . $8.99

Tacks, polished plated brass, 1/2" diameter high domed, per 100 Tacks, polished plated brass, 1/2" diameter high domed, per 100. The steel shank is approximately 7/16" long.       TACK-HD-8-B . . . $8.99

Tacks, antiqued plated brass, 5/16" diameter low domed, per 100 Tacks, antiqued plated brass, 5/16" diameter low domed, per 100. The steel shank is approximately 1/2" long.       TACK-LD-5-A . . . $6.99

Tacks, polished plated brass, 5/16" diameter low domed, per 100 Tacks, polished plated brass, 5/16" diameter low domed, per 100. The steel shank is approximately 1/2" long.       TACK-LD-5-B . . . $6.99

Tacks, antiqued plated brass, 7/16" diameter low domed, per 100 Tacks, antiqued plated brass, 7/16" diameter low domed, per 100. The steel shank is approximately 1/2" long.       TACK-LD-7-A . . . $8.99

Tacks, polished plated brass, 7/16" diameter low domed, per 100 Tacks, polished plated brass, 7/16" diameter low domed, per 100. The steel shank is approximately 1/2" long.       TACK-LD-7-B . . . $8.99

Thompson Center tang only , for 15/16" barrel, percussion or flint used with some marks Made by Thompson Center, this tang fits their 15/16" octagon barrel, percussion or flint. Blued steel. Used with some marks, the photo is representative of the design. This is the tang only. Plugs are sold separately. Click ADD TO CART, to order this tang, for same day shipment.       TANG-TC-15-USED . . . $39.99 Closeout

Thompson Center tang only , for 1" barrel, percussion or flint used with some marks Made by Thompson Center, this tang fits their 1" octagon barrel, percussion or flint. Blued steel. Used with some marks, the photo is representative of the design. This is the tang only. Plugs are sold separately. Click ADD TO CART, to order this tang, for same day shipment.       TANG-TC-16-USED . . . $49.99 Closeout

Thompson Center tang only , for New Englander Shogun or Rifle, used with some marks Made by Thompson Center, this tang fits their New Englander Shotgun or Rifle with tapered round barrel. Blued steel. Used with some marks, the photo is representative of the design. This is the tang only. Click ADD TO CART, to order this tang, for same day shipment.       TANG-TC-NE-USED . . . $29.99 Closeout

Taps , high carbon steel, 3-48 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 4-40 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

has been added to your .

---