Sideplate for our Pennsylvania Rifles , brass This wax cast sideplate was used by gunsmiths in several regions of Pennsylvania during the 1790-1820 era. Long enough for early large locks. You may shorten it enough for smaller locks. Available in brass only. Overall length 5-1/16", height 15/16", thickness 0.120".       SP-PENN-B . . . $22.50

Sideplate for early Hawken or Plains Rifle , brass Sideplate for an early Hawken rifle, Plains rifle, trade rifle, or pistol. Counter-bored for our 3/8" bolt head, the teat points down. Remove the teat for use on English sporting rifles. Cut from solid brass, made in the U.S.A. Overall length 3/4", height 1/2", thickness 0.120". Counterbored to neatly accept our #BOLT-L-8-F lock bolt, or any 8-32 o       SP-PH-LB-B . . . $3.99

Sideplate for early Hawken or Plains Rifle , steel Sideplate for an early Hawken rifle, Plains rifle, trade rifle, or pistol. Counter-bored for our 3/8" bolt head, the teat points down. Remove the teat for use on English sporting rifles. Cut from solid steel, made in the U.S.A. Overall length 3/4", height 1/2", thickness 0.120". Counterbored to neatly accept our #BOLT-L-8-F lock bolt, or any 8-32 o       SP-PH-LB-I . . . $3.99

Sideplate for an American Longrifle or Kentucky Pistol , wax cast brass An Lebanon or Lancaster County longrifle style sideplate for a small rifle or Kentucky pistol. This sideplate is sized to be used with a small Siler flintlock, but will also fit the L&R John Bailes lock. Wax cast brass, the lock bolt holes are precast, drill for clearance to accept a 8-32 or 10-32 lock bolt. Overall length 4-1/8", height 7/8", thic       SP-PIST-2-B . . . $21.59

Sideplate for an American Longrifle or Kentucky Pistol , wax cast steel An Lebanon or Lancaster County longrifle style sideplate for a small rifle or Kentucky pistol. This sideplate is sized to be used with a small Siler flintlock, but will also fit the L&R John Bailes lock. Wax cast steel, the lock bolt holes are precast, drill for clearance to accept a 8-32 or 10-32 lock bolt. Overall length 4-1/8", height 7/8", thic       SP-PIST-2-I . . . $17.59

Sideplate for an American Longrifle or Kentucky Pistol , wax cast nickel silver An Lebanon or Lancaster County longrifle style sideplate for a small rifle or Kentucky pistol. This sideplate is sized to be used with a small Siler flintlock, but will also fit the L&R John Bailes lock. Wax cast steel, the lock bolt holes are precast, drill for clearance to accept a 8-32 or 10-32 lock bolt. Overall length 4-1/8", height 7/8", thic       SP-PIST-2-S . . . $21.59 Closeout

Sideplate , sand cast brass, made in the U.S.A. Sideplate, sand cast brass, made in the U.S.A. Overall length 2", height 7/8", thickness 0.080".       SP-PLAINS-B . . . $0.99 Closeout

Sideplate , sand cast nickel silver, made in the U.S.A. Sideplate, sand cast nickel silver, made in the U.S.A. Overall length 2", height 7/8", thickness 0.080".       SP-PLAINS-S . . . $0.99 Closeout

Flint Priming Valve , dispenses 3 grain weight, 10-1mm thread fits large flasks, brass A screw in priming valve for a Colt size flask with 10-1mm threads. The valve is used by removing the flask valve spring, locking the flask open and threading the priming valve into the spout hole. Use FFFFg black powder, for priming only. Best quality, made in the USA, this tiny valve dispenses three grains weight of priming powder, each time the       SP-PV-3 . . . $11.99

Sideplate for Herman Rupp Lehigh Valley Longrifle, wax cast brass This Lehigh Valley sideplate has a arrow head pointed tail with molding and cast in grooves. Patterned from a sideplate on a Herman Rupp longrifle, it would be ideal for other makers of the Allentown-Bethlehem region. Lock bolt are as cast for 8-32 lock bolts with 3/8" diameter heads, enlarge the clearance hole with a 13/64" drill bit to accept 10-       SP-RUPP-2-B . . . $21.59

Sideplate for Herman Rupp Lehigh Valley Longrifle, wax cast steel This Lehigh Valley sideplate has a arrow head pointed tail with molding and cast in grooves. Patterned from a sideplate on a Herman Rupp longrifle, it would be ideal for other makers of the Allentown-Bethlehem region. Lock bolt are as cast for 8-32 lock bolts with 3/8" diameter heads, enlarge the clearance hole with a 13/64" drill bit to accept 10-       SP-RUPP-2-I . . . $17.59

Sideplate for your Classic Longrifles , brass Similar to the Lancaster sideplates with a pointed tail, this sideplate is typical of those by Herman Rupp and other makers of the Allentown-Bethlehem region. For L&R Dickert or Siler's large lock. Easily shortened to fit popular smaller locks. Cut sheet brass, made in the U.S.A.. Overall length 4-11/16", height 1-1/16", thickness 0.080".       SP-RUPP-B . . . $10.99

Sideplate for your C lassic Longrifles , nickel silver Similar to the Lancaster sideplates with a pointed tail, this sideplate is typical of those by Herman Rupp and other makers of the Allentown-Bethlehem region. For L&R Dickert or Siler's large lock. Easily shortened to fit popular smaller locks. Cut sheet nickel silver (aka German silver), made in the U.S.A.. Overall length 4-11/16", height 1-1/16",       SP-RUPP-S . . . $11.99

Spout for Pocket Flask , 8-.75mm thread, brass, throws 25 grains       SPS-025 . . . $4.69

New part number is: SPS-025       SPS-25 . . . $0.00

11 Piece Powder Flask Spout Set , brass, 10-1mm thread to fit most common flasks A 11 piece set of brass flask spouts for measuring Black Powder or Pyrodex by volume. These spouts have 10-1mm threads and fit most commonly encountered powder flasks from Spain or Italy. Sizes include: 15, 20, 25, 30, 35, 40, 50, 60, 75, 90, and 100 grain volume. Each spout will fit the flasks listed below.       SP-SET . . . $53.99

Flint Priming Valve , dispenses 3 grain weight, 8-.75mm thread for pocket flasks, brass A screw in priming valve for a pocket size flask, fits our #FLASK-POCKET and #FLASK-UNUM. The valve is used by removing the flask valve spring, locking the flask open and threading the priming valve into the spout hole. Use FFFFg black powder, for priming only. Best quality, made in the USA, this tiny valve dispenses three grains volume of priming       SPS-PV-3 . . . $11.99

Sideplate, sand cast brass , made in the U.S.A. Sideplate, sand cast brass, made in the U.S.A. Overall length 5-1/2", height 1", thickness 0.125".       SP-SPW-10-B . . . $4.99 Closeout

Sideplate, sand cast nickel , made in the U.S.A. Sideplate, sand cast nickel, made in the U.S.A. Overall length 5-1/2", height 1", thickness 0.125".       SP-SPW-10-S . . . $5.59 Closeout

Sideplate, sand cast brass , made in the U.S.A. Sideplate, sand cast brass, made in the U.S.A. Overall length 5-7/16", height 1-1/16", thickness 0.125".       SP-SPW-11-B . . . $4.99 Closeout

Sideplate, sand cast nickel , made in the U.S.A. Sideplate, sand cast nickel, made in the U.S.A. Overall length 5-7/16", height 1-1/16", thickness 0.125".       SP-SPW-11-S . . . $5.59 Closeout

Sideplate, sand cast nickel , made in the U.S.A. Sideplate, sand cast nickel, made in the U.S.A. Overall length 5-3/8", height 1-1/16", thickness 0.125".       SP-SPW-12-S . . . $5.59 Closeout

Sideplate for your Popular Longrifles , sand cast nickel silver Copied from an original Dauphin County rifle. Right hand only. Overall length 5-5/16", height 1", thickness 0.125".       SP-SPW-13-S . . . $5.59

Sideplate for your Popular Longrifles , new wax cast brass Copied from an original Dauphin County rifle. Right hand only. Now wax cast brass. Overall length 5-1/4", height 1", thickness 0.120".       SP-SPW-2-B . . . $21.59

Sideplate for your Popular Longrifles , new wax cast steel Copied from an original Dauphin County rifle. Right hand only. Now wax cast steel. Overall length 5-1/4", height 1", thickness 0.120".       SP-SPW-2-I . . . $17.59

has been added to your .

---