Ramrod pipe, iron , entry pipe with skirt, octagon with rings, for 5/16" ramrod Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-1/4" length, about 2-3/4" overall, including the skirt. Wax cast steel. Use our #PIN-3/32" steel dowel pin for mounting the entry pipe on a fullstock or halfstock rifle.       RP-IH-E-5-I . . . $14.99

Ramrod pipe, brass , entry pipe with skirt, octagon with rings, for 3/8" ramrod Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-1/4" length, about 2-3/4" overall, including the skirt. Wax cast brass. Use our #PIN-3/32" steel dowel pin for mounting the entry pipe on a fullstock or halfstock rifle.       RP-IH-E-6-B . . . $18.99

Ramrod pipe, iron , entry pipe with skirt, octagon with rings, for 3/8" ramrod Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-1/4" length, about 2-3/4" overall, including the skirt. Wax cast steel. Use our #PIN-3/32" steel dowel pin for mounting the entry pipe on a fullstock or halfstock rifle.       RP-IH-E-6-I . . . $14.99

Ramrod pipe, brass , pistol entry pipe with skirt, octagon with ringed ends, for 5/16" ramrod Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 7/8" length, about 1-3/4" overall, including the skirt. Wax cast brass. Use our #PIN-3/32" steel dowel pin for mounting the entry pipe on a fullstock or halfstock pistol.       RP-IH-PE-5-B . . . $18.99

Ramrod pipe, steel , pistol entry pipe with skirt, octagon with ringed ends, for 5/16" ramrod Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 7/8" length, about 1-3/4" overall, including the skirt. Wax cast steel. Use our #PIN-3/32" steel dowel pin for mounting the entry pipe on a fullstock or halfstock pistol.       RP-IH-PE-5-I . . . $14.99

Ramrod pipe, brass , pistol entry pipe with skirt, octagon with ringed ends, for 3/8" ramrod Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 7/8" length, about 1-3/4" overall, including the skirt. Wax cast brass or iron (steel). Use our #PIN-3/32" steel dowel pin for mounting the entry pipe on a fullstock or halfstock pistol.       RP-IH-PE-6-B . . . $18.99

Ramrod pipe, steel , pistol entry pipe with skirt, octagon with ringed ends, for 3/8" ramrod Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 7/8" length, about 1-3/4" overall, including the skirt. Wax cast steel. Use our #PIN-3/32" steel dowel pin for mounting the entry pipe on a fullstock or halfstock pistol.       RP-IH-PE-6-I . . . $14.99

H.E. Leman Trade Rifle Ramrod Pipes , round, for 3/8" or 7/16" ramrod, wax cast brass or iron Shown in side view, and top view, these ramrod pipes are round, for either a 3/8", or 7/16" diameter ramrod, in your choice of brass or iron (steel), for fullstock or halfstock. Our entry pipe (where rod enters the wood) has an integral skirt. Overall length is 2-17/64", body is 1-3/64"long with walls 1/32" thick. The lug for pin stands .2" tall.

Fusil or Fowler Ramrod Pipes , deluxe round with ringed ends, polished brass or iron Shown in side view, and top view, these French octagon ramrod pipes are round with raised rings at each end, for your choice of 5/16" or 3/8" ramrod, available in your brass or iron, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, for use on fusils or fowlers, these are ideal for

Fusil or Fowler Ramrod Pipes , octagon, polished brass Shown in side view, and top view, these French octagon ramrod pipes are octagon with rounds at each end, for your choice of 3/8" ramrod, available in your brass only, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, for use on fowler or fusil, these are ideal for use on many of our

Fowler or Fusil Ramrod Pipes, Round , polished brass or iron Shown in side view, and top view, these fusil or fowler ramrod pipes are unadorned, for your choice of 5/16" or 3/8" ramrod, available in your brass or iron, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, for use on fusils or fowlers, these are ideal for use on many of our Pennsy

Ramrod pipe, brass , fits Thompson Center Hawken Rifle, brass, for 3/8" ramrod, drilled for 6-48 mounting screw. This new made ramrod pipe fits the Thompson Center Hawken Rifle. Turned from solid brass to accept a 3/8" diameter ramrod. Cross drilled and counter sunk on the inside for mounting with a 6-48 threaded screw, our #SCREW-6-48-TC-ROD-PIPE.       RP-TCH-H-6-B . . . $9.99

Ramrod pipe, steel , fits Thompson Center Renegade Rifle, steel, for 3/8" ramrod, drilled for 6-48 mounting screw. This new made ramrod pipe fits the Thompson Center Renegade Rifle and other models. Turned from solid steel to accept a 3/8" diameter ramrod. Cross drilled and counter sunk on the inside for mounting with a 6-48 threaded screw, our #SCREW-6-48-TC-ROD-PIPE.       RP-TCH-H-6-I . . . $9.99

Ramrod Tip with Covered Ball Puller Worm , for 5/16" ramrod , brass base and cover, fancy tapered antique style ball puller screw, with sharp tip of tempered steel This brass base is designed for use on a 5/16" ramrod. It is ideal for use on the hidden end of a tapered shotgun ramrod. You will need to turn the end of the rod down to 1/4" then glue and cross drill and pin the tip in place. The base and knurled cap are .300" diameter, slightly under 5/16" to easily enter a 5/16" ramrod pipe and ramrod hole. The       RT-CW-5 . . . $10.99

Ramrod Tip with Covered Ball Puller Worm , for 3/8" ramrod , brass base and cover, fancy tapered antique style ball puller screw, with sharp tip of tempered steel This brass base is designed for use on a 3/8" ramrod. It is ideal for use on the hidden end of a tapered rifle, fowler, or shotgun ramrod. You will need to turn the end of the rod down to 5/16" then glue and cross drill and pin the tip in place. The base and knurled cap are .365" diameter, slightly under 3/8" to easily enter a 3/8" ramrod pipe and       RT-CW-6 . . . $10.99

Ramrod Tip with Covered Ball Puller Worm , for 7/16" ramrod , brass base and cover, fancy tapered antique style ball puller screw with sharp tip of tempered steel This brass base is designed for use on a 7/16" ramrod. It is ideal for use on the hidden end of a tapered large bore rifle or shotgun ramrod. You will need to turn the end of the rod down to 3/8" then glue and cross drill and pin the tip in place. The base and knurled cap are .425" diameter, slightly under 7/16" to easily enter a 7/16" ramrod pipe       RT-CW-7 . . . $10.99

Screws & pins , complete set for U. S. Model 1803 Harper's Ferry Rifle , unplated steel Our complete set of screws & pins for the U. S. Model 1803 Harper's Ferry Rifle are made of unplated steel, with slotted heads. These are becoming scarce. Our set includes: 2 #BOLT-L-1803 lock bolt, 8-32, 3/8" head, for mounting the lock, plus 1 #BOLT-T-8-OL tang bolt, 8-32, countersink oval head, plus 2 #SCREW-10x1V wood screws, #10 x 1", for mo       SCREW-SET-1803 . . . $16.67

Screws & pins , for 1746 Brown Bess , unplated steel Our complete set of screws & pins for the 1746 Willit's Pattern Brown Bess are made of unplated or black oxide finished steel, with slotted heads. These are becoming scarce. Our set includes: 2 #BOLT-BESS-46 lock bolt, 10-32, 17/32" head, for mounting the lock, plus 1 #BOLT-T-10-FL tang bolt, 10-32, countersink flat head, plus 1 #BOLT-T-8-S tang       SCREW-SET-46 . . . $20.56

Screws & pins , complete set for Early Fowler or Fusil , unplated steel Our complete set of screws & pins for the Early Fusil are made of unplated or black oxide finished steel, with slotted heads. These are becoming scarce. Our set includes: 2 #BOLT-L-8-F lock bolt, 8-32, 3/8" head, for mounting the lock, plus 1 #BOLT-T-8-OS tang bolt, 8-32, countersunk oval head, plus 2 #SCREW-10x1 wood screws, #10 x 1", for mounti       SCREW-SET-EF . . . $15.67

Screws & Pins , complete set for Hawken halfstock rifle , unplated steel Our complete set of screws & pins for the Hawken halfstock rifle are made of unplated or black oxide finished steel, with slotted heads. These are becoming scarce. Our set includes: 1 #BOLT-L-8-F lock bolt, 8-32, 3/8" head, for mounting the lock, plus 2 #BOLT-T-8-FL tang bolt, 8-32, countersink flat head, plus 2 #SCREW-10x1 wood screws, #10 x 1",       SCREW-SET-HR . . . $25.59

Screws & pins , complete set for Kentucky pistol , unplated steel Our complete set of screws & pins for the Kentucky pistol are made of unplated or black oxide finished steel, with slotted heads. These are becoming scarce. Our set includes: 2 #BOLT-L-8-F lock bolt, 8-32, 3/8" head, for mounting the lock, plus 1 #BOLT-T-8-OS tang bolt, 8-32, countersing oval head, plus 3 #SCREW-6x5/8 wood screws, #6 x 5/8", for       SCREW-SET-KP . . . $12.87

Screws & pins , complete set for H.E. Leman Indian Trade Rifle , unplated steel Our complete set of screws & pins for the H.E. Leman Indian Trade Rifle are made of unplated or black oxide finished steel, with slotted heads. These are becoming scarce. Our set includes: 1 #BOLT-L-8-TG lock bolt, 8-32, 7/16" head, for mounting the lock, plus 1 #BOLT-T-8-OL tang bolt, 8-32, 3/8" countersink oval head, plus 2 #SCREW-10x1 wood scr       SCREW-SET-LE . . . $14.28

Screws & pins , complete set for Longrifle , unplated steel Our complete set of screws & pins for the Longrifle are made of unplated or black oxide finished steel, with slotted heads. These are becoming scarce. Our set includes: 2 #BOLT-L-8-F lock bolt, 8-32, 3/8" head, for mounting the lock, plus 1 #BOLT-T-8-OS tang bolt, 8-32, countersink oval head, plus 2 #SCREW-10x1 wood screws, #10 x 1", for mounting       SCREW-SET-LR . . . $15.07

Screws & pins , complete set for North West Trade Gun , unplated steel Our complete set of screws & pins for the North West Trade Gun are made of unplated or black oxide finished steel, with slotted heads. These are becoming scarce. Our set includes: 2 #BOLT-L-10-D domed lock bolt, 10-32, for mounting the lock, plus 1 #BOLT-L-10-USL domed lock bolt, 10-32, for use as an inverted tang screw, plus 1 #SCREW-10-D domed       SCREW-SET-NW . . . $15.97

Screws & pins , complete set for Tennessee rifle , unplated steel Our complete set of screws & pins for the Tennessee rifle are made of unplated or black oxide finished steel, with slotted heads. These are becoming scarce. Our set includes: 2 #BOLT-L-8-F lock bolt, 8-32, 3/8" head, for mounting the lock, plus 2 #BOLT-T-8-OS tang bolt, 8-32, countersink oval head, plus 2 #SCREW-10x1 wood screws, #10 x 1", for mo       SCREW-SET-TN . . . $15.36

has been added to your .

---