Your search for 'rods'
returned
524 results.
|
Gunsmithing Labor: mill and solder ramrod pipe to rib, price each
We mill a flat on each rod pipe, and a matching flat notch in the rib. After "tinning" both flats with solder, we clamp the pipe, heat the joint, and cause the two solder coated surfaces to be joined. We require fitting the underrib and breech plug before performing this operation.
|
|
Grooved Muzzle Cap , brass or nickel silver
Polished brass or nickel silver, your rod rests securely in this muzzle cap. The groove is an extension or your ramrod channel. Overall length is 2". Cut for 3/4", 13/16", 7/8", 15/16", or 1" octagon barrel.
|
|
Nipple Wrench for Muskets , with slotted socket, for square or flat side nipples
Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! This well tempered slotted end wrench works well for he
|
|
Nipple Wrench for Rifles & Shotguns , slotted end for #11 nipple
Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! This well tempered nipple wrench has two sturdy finger
|
|
Nipple Wrench for Rifles , short style, with slotted end
Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! Our most popular wrench, light enough to fit in your po
|
|
Nipple Wrench for Rifles & Pistols , small slotted socket end, for small nipples
Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! Our smallest socket wrench has a .3/8" body tapering do
|
|
patchbox release V spring for American longrifle , tempered steel, USA
This V spring is used in our #PB-RK-FINE-I patchbox release kit. This is the V spring only, the most complex part of our kit. Use it as a replacement, or add your own button, rod, and door latch to create your own patchbox release. Tempered spring steel, it is modelled after and original used by Jacob Dickert and many other famous original longrifl
|
|
Solid Brass Pin Stock
Brass pin stock may be used to secure rod pipes and barrel lugs to the gun stock. We prefer to use 3/32" steel dowel pins for pinning the barrel, and trigger. Brass pins are also useful in knife building.
|
|
Solid Brass Pin Stock , 1/16" diameter, 6" length
Brass pin stock may be used to secure rod pipes and barrel lugs to the gun stock. We prefer to use 3/32" steel dowel pins for pinning the barrel, and trigger. Brass pins are also useful in knife building.
|
|
Solid Brass Pin Stock , 3/32" diameter, 6" length
Brass pin stock may be used to secure rod pipes and barrel lugs to the gun stock. We prefer to use 3/32" steel dowel pins for pinning the barrel, and trigger. Brass pins are also useful in knife building.
|
|
Nipple primer , brass, for percussion guns
This tiny flask dispenses priming powder directly into the nipple, to clear a mis-fire. It must be filled with very finely granulated black powder. This small flask is 3-5/16" long with a 1/2" diameter. If you do not have FFFFg priming powder available, place one-half teaspoon of FFg or FFFg into a saucer. Press the spoon with your thumb, and gentl
|
|
Ramrod for Traditions Prairie Hawken & Woodsman Rifle 9mm (.354") brown Delrin nylon, 27-3/8" maximum length, flared brass tip threaded 8-32 at front, 10-32 thread at rear.
9mm (.354") brown Delrin nylon, 27-3/8" long. Polished brass tips are threaded 10-32 at rear, 8-32 at front. Made in the USA, by Track of the Wolf, Elk River, Minnesota. No ramrod is unbreakable, but with normal use, this rod should last a lifetime. Use a ball starter to engrave the rifling at the muzzle, and wipe the bore after every shot.
|
|
Ramrod for Traditions Mountain Rifle 9mm (.354") brown Delrin nylon, 31-1/2" long. Brass tips are threaded 10-32 at rear, 8-32 at front.
Ramrod for Traditions Mountain Rifle, 9mm (.354") brown Delrin nylon, 31-1/2" long. Brass tips are threaded 10-32 at rear, 8-32 at front. Made in the USA, by Track of the Wolf, Elk River, Minnesota. No ramrod is unbreakable, but with normal use, this rod should last a lifetime.
|
|
Ramrod for Investarms Great Plains, Gemmer Hawken, Lyman Great Plains Rifle & Hunter by Investarms , 3/8" stained hickory, 32-1/2" long, flared brass tip threaded 8-32 at front, 10-32 thread at rear. For Lyman Great Plains Rifle with 32-1/2" ramrod.
Ramrod for Lyman Great Plains Rifle & Lyman Great Plains Hunter , 3/8" stained hickory, 32-1/2" long, flared brass tip threaded 8-32 at front, 10-32 thread at rear. For Lyman Great Plains Rifle with 32-1/2" ramrod. Made in the USA, by Track of the Wolf, Elk River, Minnesota. Certain early Lyman rifles have an extra-deep ramrod hole, to accept our
|