Your search for 'rods'
returned
536 results.
|
Nipple Wrench for Rifles , short style, with slotted end
Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! Our most popular wrench, light enough to fit in your po
|
|
Nipple Wrench for Rifles & Pistols , small slotted socket end, for small nipples
Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! Our smallest socket wrench has a .3/8" body tapering do
|
|
patchbox release V spring for American longrifle , tempered steel, USA
This V spring is used in our #PB-RK-FINE-I patchbox release kit. This is the V spring only, the most complex part of our kit. Use it as a replacement, or add your own button, rod, and door latch to create your own patchbox release. Tempered spring steel, it is modelled after and original used by Jacob Dickert and many other famous original longrifl
|
|
Solid Brass Pin Stock
Brass pin stock may be used to secure rod pipes and barrel lugs to the gun stock. We prefer to use 3/32" steel dowel pins for pinning the barrel, and trigger. Brass pins are also useful in knife building.
|
|
Solid Brass Pin Stock , 1/16" diameter, 6" length
Brass pin stock may be used to secure rod pipes and barrel lugs to the gun stock. We prefer to use 3/32" steel dowel pins for pinning the barrel, and trigger. Brass pins are also useful in knife building.
|
|
Solid Brass Pin Stock , 3/32" diameter, 6" length
Brass pin stock may be used to secure rod pipes and barrel lugs to the gun stock. We prefer to use 3/32" steel dowel pins for pinning the barrel, and trigger. Brass pins are also useful in knife building.
|
|
Nipple primer , brass, for percussion guns
This tiny flask dispenses priming powder directly into the nipple, to clear a mis-fire. It must be filled with very finely granulated black powder. This small flask is 3-5/16" long with a 1/2" diameter. If you do not have FFFFg priming powder available, place one-half teaspoon of FFg or FFFg into a saucer. Press the spoon with your thumb, and gentl
|
|
Ramrod for Traditions Prairie Hawken & Woodsman Rifle 9mm (.354") brown Delrin nylon, 27-3/8" maximum length, flared brass tip threaded 8-32 at front, 10-32 thread at rear.
9mm (.354") brown Delrin nylon, 27-3/8" long. Polished brass tips are threaded 10-32 at rear, 8-32 at front. Made in the USA, by Track of the Wolf, Elk River, Minnesota. No ramrod is unbreakable, but with normal use, this rod should last a lifetime. Use a ball starter to engrave the rifling at the muzzle, and wipe the bore after every shot.
|
|
Ramrod for Traditions Mountain Rifle 9mm (.354") brown Delrin nylon, 31-1/2" long. Brass tips are threaded 10-32 at rear, 8-32 at front.
Ramrod for Traditions Mountain Rifle, 9mm (.354") brown Delrin nylon, 31-1/2" long. Brass tips are threaded 10-32 at rear, 8-32 at front. Made in the USA, by Track of the Wolf, Elk River, Minnesota. No ramrod is unbreakable, but with normal use, this rod should last a lifetime.
|
|
Ramrod for Investarms Great Plains, Gemmer Hawken, Lyman Great Plains Rifle & Hunter by Investarms , 3/8" stained hickory, 32-1/2" long, flared brass tip threaded 8-32 at front, 10-32 thread at rear. For Lyman Great Plains Rifle with 32-1/2" ramrod.
Ramrod for Lyman Great Plains Rifle & Lyman Great Plains Hunter , 3/8" stained hickory, 32-1/2" long, flared brass tip threaded 8-32 at front, 10-32 thread at rear. For Lyman Great Plains Rifle with 32-1/2" ramrod. Made in the USA, by Track of the Wolf, Elk River, Minnesota. Certain early Lyman rifles have an extra-deep ramrod hole, to accept our
|
|
|
Ramrod, 33" for older Lyman Great Plains Rifle by Investarms or Green Mountain barrel , with tips threaded both 10-32 and 8-32. 3/8" brown Delrin nylon
Ramrod for early Lyman Great Plains Rifles & Green Mountain barrels , 3/8" Delrin nylon,, 33" long, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod. Certain early Lyman rifles have an extra-deep ramrod hole, to accept this 33" ramrod.
|
|
|
Ramrod, 33" for older Lyman Great Plains Rifle by Investarms or Green Mountain barrel , with tips threaded both 10-32 and 8-32.
Ramrod for certain Lyman Great Plains Rifles & Green Mountain barrels , 3/8" stained hickory, 33" length, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made in the USA, by Track of the Wolf, Elk River, Minnesota.. Certain early Lyman rifles have an extra-deep ramrod hole, to accept this 33" ramrod. Most Lyman Great Plains Rifles
|
|
Ramrod for Mortimer 12 gauge shotgun by Davide Pedersoli , 3/8" tapered hickory, 34-7/8" lock, Brass tips, with tempered steel ball puller hidden under the end cap. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod
Ramrod, 34-7/8" hickory, stained brown, tapered, with brass tips, for 12 ga Davide Pedersoli & Co. Mortimer shotgun. The front end is fitted with a correct tulip shaped flared brass tip for pushing wads and cards. The rear end is fitted with a hardened and tempered sharp steel wad worm, concealed under a brass tip. The rear 13-1/4" are tapered to
|
|
Ramrod for a Hatfield longrifle in .45, .50, or larger caliber , 9mm (.354") stained hickory, 38-3/4" long. with brass tips threaded 10-32 at front and rear. Made in the USA by Track of the Wolf, Elk River, Minnesota. We turn the brass tips and assemble the ramrod.
Ramrod for Hatfield longrifle in .45, .50, or larger caliber , 9mm (.354") stained hickory, 38-3/4" long. with brass tips threaded 10-32 at front and rear. Made by Track of the Wolf, in Elk River, Minnesota. We turn the brass tips and assemble the ramrod. Order a cleaning jag, such #JS-45-6-10 or #JS-50-6-10 or other caliber. Not for Davide Pede
|
|
Underrib , milled steel, 24" blank for U. S. Model 1803 Harper's Ferry Rifle
This extra deep underrib is made for the U. S. Model 1803 Harper's Ferry Rifle . This milled steel 24" underrib requires trimming to length and final polishing, to remove mill marks, before installation and finishing. It may be used on the U.S. Model 1803 Harper's Ferry Rifle with 33" barrel, or the U.S. Model 1814 Harper's Ferry Rifle with 36" bar
|
|
Under Rib , drawn steel, 4-3/4", for 15/16" octagon barrel
This drawn steel 4-3/4" underrib smooth and ready for installation, final polishing, and finishing. It will fit a 12" or shorter barrel, assuming a 7-1/4" forend length (4-3/4" + forend length = barrel length). Sometimes soldered to the bottom flat of your 15/16" octagon barrel, we recommend using our Stay-Brite brand solder, to tin the mating sur
|
|
Under Rib , milled steel, 24", for 13/16" octagon barrel
This milled steel 24" underrib requires final polishing, to remove mill marks, before installation and finishing. It will fit a 40" or shorter barrel, assuming a 16" forend length (24" + forend length = barrel length). Sometimes soldered to the bottom flat of your 13/16" octagon barrel, we recommend using our Stay-Brite brand solder, to tin the mat
|
|
|
Under Rib , milled steel, 24", for _7/8"_ octagon barrel
This milled steel 24" underrib requires final polishing, to remove mill marks, before installation and finishing. It will fit a 40" or shorter barrel, assuming a 16" forend length (24" + forend length = barrel length). Sometimes soldered to the bottom flat of your 7/8" octagon barrel, we recommend using our Stay-Brite brand solder, to tin the matin
|
|
|
Under Rib , milled steel, 24", for 15/16" octagon barrel
This milled steel 24" underrib requires final polishing, to remove mill marks, before installation and finishing. It will fit a 40" or shorter barrel, assuming a 16" forend length (24" + forend length = barrel length). Sometimes soldered to the bottom flat of your 15/16" octagon barrel, we recommend using our Stay-Brite brand solder, to tin the mat
|
|
|
Under Rib , milled steel, 24", for __1" _ octagon barrel
This milled steel 24" underrib requires final polishing, to remove mill marks, before installation and finishing. It will fit a 40" or shorter barrel, assuming a 16" forend length (24" + forend length = barrel length). Sometimes soldered to the bottom flat of your 1" octagon barrel, we recommend using our Stay-Brite brand solder, to tin the mating
|