Carbon Steel Bowie Blade Blank , 6" blade, primitive finish, made in the U.S.A. High carbon steel, with a primitaive lightly textured finish with bright ground edges, wide tang drilled for three rivets. Made in the U.S.A. this blade is similar in design to the Solingen, German blade that is no longer manufactured. Blade is 6", with 10-1/4" overall length. Ground 0.15" thick, high carbon cutlery steel.       BLADE-5963-6-AP . . . $31.99

Small Texas Bowie Carbon Steel Knife Blade Blank , 5" blade, ground finish, made in the U.S.A. 1075 high carbon steel, with a bright ground finish and 10-24 threaded tang. Made in the U.S.A. Blade is 5", with 9-3/4" overall length. Ground 0.15" thich high carbon cutlery steel.       BLADE-6053-A . . . $33.99

Riflemen's Carbon Steel Knife Blade Blank , 7-7/8" blade, ground finish, made in the U.S. A. High carbon steel, ground finish, with annealed 10-24 threaded tang, made in the U.S.A. Select one of our sand cast brass guards, file it to fit, and install a crown end deer antler handle from your trophy collection. Blade is 7-7/8", with 12-1/8" overall length. Ground 0.15" thick, high carbon cutlery steel.       BLADE-6056-A . . . $44.99

Medium Texas Bowie Carbon Steel Knife Blade Blank , 6" blade, ground finish, made in the U.S.A. 1075 high carbon steel, with a bright ground finish and 10-24 threaded tang. Made in the U.S.A. Blade is 6", with 10-1/8" overall length. Ground 0.15" thich high carbon cutlery steel.       BLADE-6063-A . . . $30.99

Large Texas Bowie Carbon Steel Knife Blade Blank , 7" blade, ground finish, made in the U.S.A. 1075 high carbon steel, bright ground finish, with annealed 10-32 threaded tang. Made in the U.S.A. Blade is 7", with 12-5/8" overall length. Ground 0.15" thick, high carbon cutlery steel.       BLADE-6073-A . . . $39.99

Large Full Tang Carbon Steel Bowie Blade Blank , 10" blade, ground finish, made in the U.S.A. 1075 high carbon steel, with a bright ground finish. The full tang is drilled for three rivets with 0.17" diameter holes. Our largest blade. Made in the U.S.A. Blade is 10", with 15-1/2" overall length. Ground 0.18" thick, high carbon cutlery steel.       BLADE-6076-A . . . $52.99

Beartooth Paring Stainless Steel Knife Blank , 4" blade, by Russell Green River, U.S.A. The Beartooth Paring Knife Blade is easily assembled. Features a 4" blade, with a 8" overall length. Forged from .064" thick stainless cutlery steel by America's oldest cutlery, Russell Green River. Properly tempered to sharpen quickly and hold an edge. Blade is 4", with a 8" overall length. Forged from .064" thick stainless cutlery steel. We recom       BLADE-BEAR-04 . . . $18.99

Boning Forged Carbon Steel Blade Blank , 6" blade, by Russell Green River, U.S.A. The Boning blade is great for use in the kitchen. Features a 6" blade, with a 10-1/2" overall length. Forged from .112" thick carbon cutlery steel by America's oldest cutlery, Russell Green River. Properly tempered to sharpen quickly and hold an edge. Blade is 6", with 10-1/2" overall length. Forged from .112" thick carbon cutlery steel We recomme       BLADE-BON-06 . . . $21.50

Buffalo Skinner Forged Carbon Steel Blade , 5" curved edge, made in the U.S.A. , by Russell ~ Green River Not imported, this American made blade is proudly marked Made in the U.S.A. The Buffalo Skinner Blade, is a authentic early skinner. Features a 5" blade, with a 8-3/4" overall length. Forged from .138" thick carbon cutlery steel, properly tempered to sharpen quickly and hold an edge. This blade has a 5" edge, with 8-3/4" overall length. Correctly       BLADE-BUF-05 . . . $20.99

Butcher Forged Carbon Steel Blade Blank , 6" blade, by Russell Green River, U.S.A. The Butcher blade is great for use in the kitchen. Features a 6" blade, with a 10-1/2" overall length. Forged from .094" thick carbon cutlery steel by America's oldest cutlery, Russell Green River. Properly tempered to sharpen quickly and hold an edge. We recommend three (3) #RIVET-5 brass rivets. Use our Piloted Counterbore to seat the rivet heads       BLADE-BUT-06 . . . $21.50

Butcher Forged Carbon Steel Blade , 8" blade, by Russell Green River, U.S.A. The Butcher blade is great for use in the kitchen. Features a 8" blade, with a 12-1/2" overall length. Holes in handle are 0.160" diameter. Forged from .094" thick carbon cutlery steel by America's oldest cutlery, Russell Green River. Properly tempered to sharpen quickly and hold an edge. Same day shipment, when you click ADD TO CART and complete       BLADE-BUT-08 . . . $22.50

Camp Forged Carbon Steel Knife Blade , 5" blade, proudly Made in the U.S.A. , by Russell ~ Green River, U.S.A. The Camp Knife Blade is easily assembled. Features a 5" blade, with a 9" overall length. Forged from .112" thick carbon cutlery steel by America's oldest cutlery, Russell Green River. Properly tempered to sharpen quickly and hold an edge. Not imported, this blade is made in the USA. We recommend instaling the scale handles using three (3) #RIVET-5.       BLADE-CAM-05 . . . $20.99

Scottish Dirk Blade , 17" overall, with 11-3/4" blade, hand forged in India This variation of our Scottish dirk blade is forged from carbon steel, polished, and buffed to a bright sheen. Tang is threaded 10-24. It features a deep groove along its back edge, and a false edge at the point. Entirely hand made, like the original dirk blades, this replica blade is imported from India. This Dirk blade is 11-3/4" edge, with 17" o       BLADE-DIRK-S . . . $31.99

The Pawnee Stainless Steel Knife Blank 4-7/8" blade, made in Norway These rugged blades are made from stainless steel. Blades are ground, polished, and shipped sharp. Be careful! The hardened tang has a .16" diameter hole at the end. These blades are very sharp, and tend to stay that way. We enjoy using these economical imported blades in our shipping department, where they cut fiberglas tape, plastic bands, cardbo       BLADE-N5 . . . $29.99

Paring Forged Carbon Steel Blade , 3" blade, by Russell Green River, U.S.A. The Paring Knife Blade is easily assembled. Features a 3" blade, with a 7" overall length. Forged from .050" thick carbon cutlery steel by America's oldest cutlery, Russell Green River. Properly tempered to sharpen quickly and hold an edge. Looking for a matching sheath? The sheaths listed below will fit this blade nicely.       BLADE-PAR-03 . . . $12.49

Pacific Paring Forged Carbon Steel Knife Blade , 3-1/2" blade, by Russell ~ Green River, U.S.A. The Pacific Paring Knife Blade is easily assembled. This is a popular choice to use to make a patch knife. Features a 3-1/2" blade, with a 6-1/2" overall length. Forged from .075" thick carbon cutlery steel by America's oldest cutlery, Russell Green River. We recommend two (2) #RIVET-5 brass rivets. Use our Piloted Counterbore to seat the rivet hea       BLADE-PAT-03 . . . $15.99

Platte Carbon Steel Knife Blade Blank 3-3/4" blade, made in the U.S.A. The Platte River blank is an ideal patch knife and hunting blade, for the muzzle loading hunter. Make a sheath for it on your possibles bag strap, and it will become a shooting companion. High carbon cutlery steel, polished. Blade is 3-3/4", overall length 7-3/4", 0.11" thick, high carbon cutlery steel.       BLADE-PLATTE . . . $36.99

Classic Green River Knife Blade , 5" edge, forged carbon steel, made in the U.S.A. , by Russell - Green River, U.S.A. , America's Oldest Cutlery Yes, our Russell - Green River blades are made in the U.S.A., they are not the cheap imports found elsewhere. The Classic Green River Knife blade honors the maker's good name. It features a 5" cutting edge, 9" overall length. Forged from thick .086" carbon cutlery steel, it is properly tempered to sharpen quickly and hold an edge. Made by America'       BLADE-RGR-05 . . . $18.95

Ripper Forged Carbon Steel Knife Blade , 4" blade, by Russell ~ Green River, U.S.A. The Ripper Knife Blade is a popular small knife blade. Features a 4" blade, with a 8-1/2" overall length. Forged from .072" thick carbon cutlery steel by America's oldest cutlery, Russell Green River. Properly tempered to sharpen quickly and hold an edge. Looking for a matching sheath? The sheaths listed below will fit this blade nicely.       BLADE-RIP-04 . . . $14.89

Santa Fe Forged Carbon Steel Knife Blade Blank 3-1/2" blade, from Solingen, Germany Our Santa Fe blade is a revival of the classic skinner style blade. The full size grip and curved edge simplifies skinning without damage to the meat, skin, or valuable fur. Forged cutlery steel, polished bright. Blade is 3-1/2", overall length 8-1/4". Forged 0.120" thick, high carbon cutlery steel.       BLADE-SANTA-FE . . . $23.99

Flat Saw Blades , size 1, .012" thick, .025" width, 51 teeth per inch, pk of 12 Hardened and tempered steel flat saw blades; uniform in size, shape and sharpness to assure fast, easy cutting. Ideal for cutting rods and tubing. Saw silver, brass, copper, and steel. Length 5-1/4", sold in packs of a dozen. Made in Germany       BLADE-SF-1 . . . $4.99

Flat Saw Blades , size 12, .024" thick, .065" width, 20 teeth per inch, pk of 12 Hardened and tempered steel flat saw blades; uniform in size, shape and sharpness to assure fast, easy cutting. Ideal for cutting rods and tubing. Saw silver, brass, copper, and steel. Length 5-1/4", sold in packs of a dozen. Made in Germany       BLADE-SF-12 . . . $12.99

Flat Saw Blades , size 6, .017" thick, .037" width, 33 teeth per inch, pk of 12 Hardened and tempered steel flat saw blades; uniform in size, shape and sharpness to assure fast, easy cutting. Ideal for cutting rods and tubing. Saw silver, brass, copper, and steel. Length 5-1/4", sold in packs of a dozen. Made in Germany       BLADE-SF-6 . . . $6.99

Sheath Forged Carbon Steel Knife Blade , 4-1/2" blade, by Russell ~ Green River, U.S.A. The Sheath Knife Blade is a popular mid-sized knife blade. Features a 4-1/2" blade, with a 8-1/2" overall length. Forged from .088" thick carbon cutlery steel by America's oldest cutlery, Russell Green River. Properly tempered to sharpen quickly and hold an edge. We recommend two (2) #RIVET-5 brass rivets. Use our Piloted Counterbore to seat the ri       BLADE-SHE-04 . . . $19.99

Sheep Skinner Forged Carbon Steel Blade , 5-1/4" edge, made in the U.S.A. , by Russell ~ Green River The sheep Skinner Blade, is a authentic early skinner. Features a 5-1/4" blade, with a 9-3/4" overall length. Forged from .138" thick carbon cutlery steel, properly tempered to sharpen quickly and hold an edge. This blade has a 5-1/4" edge, correctly forged from .138" thick carbon cutlery steel, not modern stainless steel. Not an imported copy, thi       BLADE-SHEEP-05 . . . $18.99

has been added to your .

---