Rear sight, Tiny antique style for 13/16", or 7/8" octagon barrel, wax cast steel Patterned from a tiny original antique rear sight, this very low sight is perfect for use on a Kentucky pistol or slender longrifle. Dovetail to a depth of .050". Wax cast with a .500" dovetail, about .535" wide. Height from the bottom of the dovetail to the top of the sight notch is 0.21".       RS-AT-14 . . . $8.99

Rear Sight Blank , wax cast steel Wax cast steel, this sight blank is made in the U.S.A. The dovetail is .360" long, .560" wide. Height from the bottom of the dovetail to the top of the sight notch is 0.50". The base is a full .100" deep. We do NOT recommend cutting the slot .100" deep in your barrel. Cut a .050" slot depth (not over .062" deep), and allow the base to stand above t       RS-B-1 . . . $8.99

Rear sight, primitive buckhorn, for 13/16" or 7/8" octagon barrel, wax cast steel This primitive buckhorn rear sight has a base .375" long, .530" wide. Dovetail 0.050" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.30". Use this primitive buckhorn rear sight on a 13/16 or 7/8" octagon rifle barrel. Wax cast steel. As-cast, not polished, not blued or browned. Remove the casting gate before hand fi       RS-BH-14 . . . $8.99

Rear sight, primitive buckhorn, for 15/16" or 1" octagon barrel, wax cast steel This primitive buckhorn rear sight has a base .435" long, .590" wide. Dovetail 0.050" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.30". The base may be file fitted to smaller slots. Use this primitive buckhorn rear sight on a 15/16 or 1" octagon rifle barrel. Wax cast steel. As-cast, not polished, not blued or bro       RS-BH-16 . . . $8.99

Rear Sight, with aperture ring, for 13/16" or 7/8" barrels wax cast steel This fixed rear sight provides a little help for older eyes. This sight base may easily be shortened to fit a more narrow dovetail. Always file the sight, never file the barrel. This sight is designed for use on a longrifle with a 13/16" or 7/8" octagon barrel, or a swamped or tapered barrel of that size. The dovetail is about .750" long, as cast,       RS-CA-PEEP-14 . . . $8.99

Rear Sight, with aperture ring, for 15/16" or 1" barrels wax cast steel This fixed rear sight provides a little help for older eyes. This sight base may easily be shortened to fit a more narrow dovetail. Always file the sight, never file the barrel. This sight is designed for use on a longrifle with a 15/16" or 1" octagon barrel, or a swamped or tapered barrel of that size. The dovetail is about .750" long, as cast, an       RS-CA-PEEP-16 . . . $8.99

Creedmoor Vernier Tang Sight , for Mid Range competition, with 3" elevation, and windage adjustment This mid-range 3" Creedmoor Vernier tang sight is a bit stronger and simpler than our similar sight with pivoting adjustments. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to scribe a zero mark, since the vane is unmarked. Two 4-.7mm moun       RS-CREED-3-E . . . $87.99

Creedmoor Vernier Tang Sight , for Mid Range competition, with 3" elevation and windage, plus true Vertical alignment This mid-range 3" Creedmoor Vernier tang sight includes two pivoting adjustment screws in the base, to allow perfectly true Vertical alignment, without file fitting the base to your tang. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to sc       RS-CREED-3-WE . . . $105.99

Creedmoor Vernier Tang Sight , for Long Range competition, with 5" elevation, and windage adjustment This long-range 5" Creedmoor Vernier tang sight is a bit stronger and simpler than our similar sight with pivoting adjustments. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to scribe a zero mark, since the vane is unmarked. Two 10-28 moun       RS-CREED-5-E . . . $105.99

Creedmoor Vernier Tang Sight , for Long Range competition, with 5" elevation and windage, plus true Vertical alignment This long-range 5" Creedmoor Vernier tang sight includes two pivoting adjustment screws in the base, to allow perfectly true Vertical alignment, without file fitting the base to your tang. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to s       RS-CREED-5-WE . . . $105.99

Rear sight , classic longrifle style, for 15/16" to 1" barrels wax cast steel This classic longrifle rear sight has a base .380" long, .610" wide. Dovetail 0.050" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.32". The base may be file fitted to smaller slots. Use this classic longrifle rear sight on a 15/16 or 1" octagon rifle barrel. It could be thinned for use on smaller barrels. Wax cast       RS-CT-16 . . . $8.99

Rear sight, Primitive Buckhorn, wax cast steel This medium size full buckhorn sight has a base for a .615" dovetail and is .500" in width for 15/16" or 1" octagon barrel. Height from the bottom of the dovetail to the top of the sight notch is 0.33". Wax cast steet. Deepen the "V" as needed.       RS-DB-H-1 . . . $8.99

Rear sight, Tall Semi-Buckhorn, wax cast steel This tall semi buckhorn rear sight is blank, with no notch cut. File a "V" or square notch to your desired sight picture. The base is .530" dovetail and .700" width for barrels up to 1-1/8". Height from the bottom of the dovetail to the top of the sight notch is 0.32". Wax cast steel.       RS-DB-H-2 . . . $8.99

Vernier 5" Long Range Tang Sight , for 1874 Sharps, or 1885 Winchester rifle, complete with Sharps mounting screws, by Davide Pedersoli Blued steel, over 5" tall, this heavy gauge steel sight is calibrated with an engraved Vernier scale, from 0 to 3 inches elevation, with two windage adjustments. Zero the rifle at the eyepiece. Adjust the calibrated base to compensate for current wind conditions. The eye disk is threaded 5-.5MM to accept Pedersoli manufactured Hadley eye disk #RS-D       RS-DP-1874 . . . $310.00

Vernier 3" Mid-Range Tang Sight , for 1874 Sharps, or 1885 Winchester rifle, complete with Sharps mounting screws, by Davide Pedersoli Blued steel, over 3" tall, this heavy gauge steel sight is calibrated with an engraved Vernier scale, from 0 to 2 inches elevation, with two windage adjustments. Zero the rifle at the eyepiece. Adjust the calibrated base to compensate for current wind conditions. The eye disk is threaded 5-.5MM to accept Pedersoli manufactured Hadley eye disk #RS-D       RS-DP-1874-MID . . . $305.00

Ghost Ring Tang Sight with two aperture posts, and mounting hardware, by Davide Pedersoli & Co., Italy A ghost ring tang sight by Davide Pedersoli & Co. is designed to fit many Pedersoli rifles; some Hawken models, Kodiak Express, Howdah pistol, and double barrel shotgun. Using on the Howdah pistol or double barrel shotgun will require elevating the front sight. The sight includes two posts with 0.157" diameter aperture. The sight has both windage a       RS-DP-GRS . . . $99.00 Closeout

Hadley Eye Disk , for Pedersoli 1874 Sharps Vernier Sights Blued steel, finished non-glare blue black, this Hadley eye disk is threaded 5-.5MM to fit the Vernier Tang Sight for Davide Pedersoli's 1874 Sharps rifle #RS-DP-1874, or the Soule rear sight #RS-DP-SOULE-4. The rim is knurled for easy insertion. Roll the small knurled wheel to select one of eight apertures. A small spring loaded ball detent locks       RS-DP-HADLEY . . . $119.00

Soule Rear sight, Vernier 3" Tang Sight, for Pedersoli 1874 Sharps & 1885 Highwall rifles Pedersoli's Soule mid range tang sight has three mounting holes in the base, to fit most popular black powder rifles. The front hole is elongated to fit other brands of rifles which may have different hole spacing. The nominal centers are 2.26" apart. It will fit Sharps rifles with a 2.260" hole spacing, and Winchester 2.180" hole spacing. The eye       RS-DP-SOULE-3 . . . $340.00

Soule Rear sight, Vernier 4" Tang Sight, for Pedersoli 1874 Sharps & 1885 Highwall rifles Pedersoli's Soule long range tang sight has three mounting holes in the base, to fit most popular black powder rifles. The front hole is elongated to fit other brands of rifles which may have different hole spacing. The nominal centers are 2.25" apart. It will fit Sharps rifles with a 2.260" hole spacing, and Winchester 2.180" hole spacing. The eye       RS-DP-SOULE-4 . . . $359.00

Rear sight , 1770 Lancaster style, wax cast steel Isaac Haines style, ideal for a swamped barrel, this wax cast steel sight has concave bevels on the front three edges, and a flat top. We recommend filing a square notch for use with a blade front sight. The dovetail is about .585" long, with a .535" base about .062" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.29       RS-DRU-1 . . . $8.99

Rear sight , Longrifle style, with skirt over dovetail, wax cast steel This rear sight has a concealed dovetail under a front and rear skirt. It will hide a rough looking slot on a 13/16” or 7/8” octagon barrel. The dovetail is about .385” as cast, it will clean up to a standard .375” dovetail. The base is .550” wide. Height from the bottom of the dovetail to the top of the sight notch is 0.39".       RS-DRU-CT . . . $8.99

Rear sight , with extra long base, wax cast steel Wax cast steel, not polished, cut this extra long sight base sight to fit nearly any old dovetail. Cut this sight to fit your rifle, do not enlarge the dovetail slot in your barrel. Made in the U.S.A., the dovetail is about 1.250” length, and the base is .510” wide. Height from the bottom of the dovetail to the top of the sight notch is 0.33".       RS-DRU-LCT . . . $8.99

Rear sight, Pennsylvania style for 13/16" or 7/8" octagon barrel, wax cast steel Wax cast steel, not polished, this rear sight has a long base often found on early rifles. This small version is made for a longrifle with a slim 13/16" or 7/8" octagon barrel. The sight has a small notch centered on the blade. Made in the U. S. A., dovetail to a depth of .050" deep. Base is about .675" long, .530" wide as cast. Height from the bot       RS-FG-14 . . . $8.99

Rear sight, Tall Pennsylvania style for 13/16" or 7/8" octagon barrels, wax cast steel This small version is made for a longrifle with a slim 13/16" or 7/8" octagon barrel. Wax cast steel, this sight has a long base similar to our other Pennsylvania sight #RS-FG-14. However this sight height from the bottom of the dovetail to the top of the sight notch is 0.43", to allow sight-in with a tall front sight, and to reduce mirage and heat       RS-FG-14-T . . . $8.99

Rear sight, Pennsylvania style for 15/16" or 1" octagon barrel, wax cast steel Wax cast steel, not polished, this rear sight has a long base often found on early rifles. This small version is made for a longrifle with a slim 15/16" or 1" octagon barrel. The sight has a small notch indicated in the blade. Made in the U. S. A., dovetail to a depth of .050" deep. Base is about .715" long, .575" wide as cast. Height from the bott       RS-FG-16 . . . $8.99

has been added to your .

---