Black powder , SCHUETZEN, 1 pound, made in Germany, FFFF extra fine granulation for priming flintlocks. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands. Black powder , SCHUETZEN, made in Germany, FFFF extra fine granulation for priming flintlocks       SCH-BP-4FG . . . $35.50

Clean Out Screw , 10-32 thread, to repair Thompson Center rifles with exposed screw, you must tap the breech plug for this thread, steel This nice quality No. 10-32 slotted headless screw is made to REPAIR Thompson Center rifles where the exposed 8-32 threaded screw and threaded seat has been badly damage from attempting to remove it. The original thread was 8-32, it must be drilled and tapped 10-32 to accept this screw. . Not all production T/C guns have this style exposed screw, a       SCREW-10-32-TC-COX . . . $2.99

Wood screw, truss head #10 x 1/2" domed, steel Un-plated #10 x 1/2" truss head screw matches our #Bolt-L-10-D. Anchors the tail of N.W. Gun serpents and three screw sideplates.       SCREW-10-D . . . $0.30

Wood screw, flat head #10 x 1", unplated steel Unplated steel #10 x 1" flat head steel wood screw, for buttplates.       SCREW-10X1 . . . $0.30

Wood screw, flat head #10 x 1-1/2", steel Un-plated #10 x 1-1/2" flat head wood screw, for large buttplates.       SCREW-10X1-12 . . . $0.30

Wood screw, oval head #10 x 1", unplated steel Steel #10 x 1" oval head wood screw, unplated steel, for buttplate.       SCREW-10X1V . . . $0.40

Pack of Ten Wood Screws, oval head #1 x 1/4", steel Pack of ten unplated #1 x 1/4" oval head steel wood screw. For small inlays.       SCREW-1X14-O-PACK . . . $2.50

Machine screw, for Invest Arms underrib, 3.5-.6mm thread, unplated, steel This nice quality unplated 3.6-.6mm screw is made for mounting a Invest Arms underrib. The screw has a overall length of .305" with a .181" diameter head, .070" thick. We offer gunsmith quality carbon steel plug taps, bottom taps, tap drills, and clearance drills, for easy installation of this screw, at low cost.       SCREW-3.5-.6MM-IA-RIB . . . $2.99

Machine screw, for Invest Arms ramrod pipe, 3.5-.6mm thread, slotted, unplated, steel This nice quality unplated 3.6-.6mm screw is made for mounting a Invest Arms ramrod pipe to a underrib. The screw has a overall length of .375" with a .19" diameter head, .0.4" thick. We offer gunsmith quality carbon steel plug taps, bottom taps, tap drills, and clearance drills, for easy installation of this screw, at low cost.       SCREW-3.5-.6MM-IA-ROD-PIPE . . . $2.99

Wood screw, flat head #3 x 1/4", steel Unplated #3 x 1/4" flat head steel wood screw, for #IN-Slot-2-I inlay.       SCREW-3X14 . . . $1.59

Pack of 12 Wood Screws , #3 x 1/4", flat head for countersink, slotted, unplated steel Pack of 12 - Wood Screw, #3 x 1/4", slotted, steel, not plated       SCREW-3X14-PACK-12 . . . $18.99

Tumbler screw, 4-40 thread, .370" diameter head for Parker Shogun Fancy tumbler or hammer screw. 4-40 thread, .370" diameter head for Parker Shotguns (not Parker Hale Muskets).       SCREW-4-40-PARKER-TX . . . $2.99

Screw, 6-40 thread, 1.14" long Screw for our narrow 1746 Brown Bess swivel, #SWIVEL-46-N. 6-40 thread, 1.14" overall length. Head is 0.3" diameter.       SCREW-46-N . . . $2.99

Screw, 6-40 thread, 1.5" long Screw for our wide1746 Brown Bess swivel, #SWIVEL-46-W. 6-40 thread, 1.5" overall length. Head is 0.3" diameter.       SCREW-46-W . . . $2.99

Screw, 6-40 thread, .640" long Screw for our narrow swivel, #SWIVEL-4N. 6-40 thread, .640" length.       SCREW-4N . . . $2.99

Wood screw, flat head #4 x 5/8", unplated steel Unplated steel #4 x 5/8" flat head wood screw, for trigger-plate or toe-plate.       SCREW-4X58 . . . $0.20

Machine Screw , #5-40 thread, steel Un-plated #5-40 machine screw. Use three to five on an underrib. Overall length is 0.335"       SCREW-5-40 . . . $0.30

Machine screw, 5-40 thread, flat head for countersink, slotted, unplated steel, 5/16" long Screw, 5-40 thread, flat head for countersink, slotted, unplated steel, 0.305" length       SCREW-5-40-F . . . $0.30

Machine screw, for underrib, 5-40 thread, unplated, steel This nice quality unplated #5-40 flat head screw is made for mounting a rib, or for mounting any Hawken or English triggerguard which lacks a threaded stud, to a triggerplate. Overall length is 0.290" A bit smaller diameter than our #6-40 rib screw, that larger screw can easily be used to replace a worn #5-40 rib screw, when a worn or damaged overs       SCREW-5-40-R . . . $1.49

Tumbler screw, 5-40 thread, .436" diameter head Fancy tumbler or hammer screw. 5-40 thread, .436" diameter head.       SCREW-5-40-TX . . . $2.99

Machine screw, for underrib, 6-40 thread, unplated, steel This nice quality unplated #6-40 flat head screw is made for mounting a rib, or for mounting any Hawken or English triggerguard which lacks a threaded stud, to a triggerplate. Overall length 0.3", thread journal 0.2". A bit larger diameter than our standard #5-40 rib screw, this screw can easily be used to replace a worn #5-40 rib screw, when the       SCREW-6-40-R . . . $1.49

Tumbler screw, 6-40 thread, .436" diameter head Fancy tumbler or hammer screw. 6-40 thread, .436" diameter head.       SCREW-6-40-TX . . . $2.99

Machine screw, for underrib, 6-48 thread, unplated, steel This nice quality unplated No. 6-48 fillister head screw is made for mounting a rib, or rear sight. Overall length is 0.305" This is a popular gunsmithing screw thread size, often used on modern telescope mounts, T/C rifle ribs. We offer gunsmith quality carbon steel plug taps, bottom taps, tap drills, and clearance drills, for easy installation of       SCREW-6-48-R . . . $1.99

Sight base screw , 6-48 thread, for Thompson Center rear sight, steel This nice quality unplated No. 6-48 fillister head screw is made for mounting a Thompson Center rear sight. Overall length is 0.185". This is a popular gunsmithing screw thread size, often used on modern telescope mounts. We offer gunsmith quality carbon steel plug taps, bottom taps, tap drills, and clearance drills, for easy installation of this       SCREW-6-48-SB . . . $2.99

Machine screw, for Thompson Center underrib, 6-48 thread, unplated, steel This nice quality unplated No. 6-48 screw is made for mounting a Thompson Center underrib. The screw has a overall length of .3" with a .186" diameter head, .055" thick. We offer gunsmith quality carbon steel plug taps, bottom taps, tap drills, and clearance drills, for easy installation of this screw, at low cost.       SCREW-6-48-TC-RIB . . . $2.99

has been added to your .

---