Your search for 'bore'
returned
583 results.
|
1861 Enfield Musketoon , .58 caliber, 23" barrel, percussion, walnut, brass, bright finished barrel, used, by Euroarms
Manufactured by Euroarms of Italy, this Enfield Musketoon, with 23" barrel is marked London Armoury Co. on the lock plate. Made for the caliber .577 hollow base Minie bullet that allowed quick reloading, achieved fine accuracy, and much longer range than the round ball muskets of an earlier generation. The musketoon is trimmed in brass with brass b
|
|
Bullet Mold , .457" diameter, 535 grain bullet mold, single cavity steel mold blocks, by Lyman
Lyman, .457" diameter, 535 grain bullet mold, single cavity, steel blocks only. These precision mold blocks are made in the U.S.A. and tend to cost a bit more than other brands. They are nice quality. Special steel alloy mold blocks hold heat, for even casting temperature. Steel blocks almost never wear out, if properly stored. Blocks are made in o
|
|
American Fowling Gun , 20 gauge, 42" octagon-to-round barrel, late Ketland flintlock, maple, patina finished iron, used, by Steve Losey
A very utilitarian fowler with a 20 gauge, 42" octagon-to-round barrel, maple stock, Jim Chambers late Ketland flintlock, and English influenced iron furniture. The breech is signed by contemporary builder Mr. Steve Losey. Weighing in at 6.7 pounds, this fowler has a trigger reach of 13-1/2" making it well suited for today's average size shooter. T
|
|
Virginia Longrifle , .54 caliber, 42" swamped barrel, Chambers' round face flint lock, maple, brass trim, new, unfired, by Thom Frazier
Stocked in maple, stained to an amber brown, this brass trimmed flint longrifle blends the English and Germanic features common to the Virginia school. The .54 caliber 42" swamped octagon barrel gives the rifle excellent balance without being overly muzzle heavy. Built by Minnesota gun maker Thom Frazier , this rifle is signed on the top flat of t
|
|
Mortimer Rifle , .54 caliber, 35-1/2" octagon-to-round barrel, flintlock, checkered walnut, iron trim, used, by Davide Pedersoli
This Mortimer .54 caliber flint lock rifle is stocked in European walnut, and is a replica of the famous rifles originally made by Mortimer, of London, circa 1820. The 35-1/2" octagon-to-round barrel is highly polished and finished to a high gloss chocolate brown. A special patent hooked breech and tang allow the barrel to lift out easily for clean
|
|
Ox-Yoke® Wonder Lube 1000 Plus, 4 ounce jar
When using Wonder Lube 1000 Plus as a patch or black powder bullet lubricant, it may not be necessary to clean between shots. The bore will become “seasoned" as you use this lube. This lube does not mix with petroleum. It is wise to wipe any oil from the bore, before shooting. Not for cold weather use, it becomes solid at low temperature. You MUST
|
|
Ox-Yoke® Wonder Lube 1000 Plus, 5 ounce tube
When using Wonder Lube 1000 Plus as a patch or black powder bullet lubricant, it may not be necessary to clean between shots. The bore will become “seasoned” as you use this lube. This lube does not mix with petroleum. It is wise to wipe any oil from the bore, before shooting. Not for cold weather use, it becomes solid at low temperature. You MUST
|
|
Ox-Yoke® Wonder Lube 1000 Plus, 8 ounce jar
When using Wonder Lube 1000 Plus as a patch or black powder bullet lubricant, it may not be necessary to clean between shots. The bore will become "seasoned" as you use this lube. This lube does not mix with petroleum. It is wise to wipe any oil from the bore, before shooting. Not for cold weather use, it becomes solid at low temperature. You MUST
|
|
Ox-Yoke® Wonder Lube 1000 Plus, 8 ounce bottle
When using Wonder Lube 1000 Plus as a patch or black powder bullet lubricant, it may not be necessary to clean between shots. The bore will become "seasoned" as you use this lube. This lube does not mix with petroleum. It is wise to wipe any oil from the bore, before shooting. Not for cold weather use, it becomes solid at low temperature. You MUST
|
|
Short Starter, patch & ball starter, 5/16" brass rod for .32 to .38 caliber.
Known as a Short Starter or ball starter, use the small stud to bump the patch and ball into the muzzle, to engrave the rifling. Use the longer rod to start the ball, then use your ramrod. Use short strokes of your ramrod to seat the ball on the powder charge. Avoid grasping the ramrod high above the muzzle, which may flex the rod to the breaking p
|
|
Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber.
Known as a Short Starter or ball starter, use the small stud to bump the lubricated patch and ball into the muzzle, to engrave the rifling. Use the longer rod to start the ball, then use your ramrod. Use short strokes of your ramrod to seat the ball on the powder charge. Avoid grasping the ramrod high above the muzzle, which may flex the rod to the
|
|
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Known as a Short Starter or ball starter, use the small stud to bump the patch and ball into the muzzle, to engrave the rifling. Use the longer rod to start the ball, then use your ramrod. Use short strokes of your ramrod to seat the ball on the powder charge. Avoid grasping the ramrod high above the muzzle, which may flex the rod to the breaking p
|
|
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Known as a Short Starter or ball starter, use the small stud to bump the patch and ball into the muzzle, to engrave the rifling. Use the longer rod to start the ball, then use your ramrod. Use short strokes of your ramrod to seat the ball on the powder charge. Avoid grasping the ramrod high above the muzzle, which may flex the rod to the breaking p
|
|
Ramrod Worm , 5-.8mm metric female thread to fit Davide Pedersoli Second Model Brown Bess military ramrod, for cleaning muskets, removing patches, cards, wads,
Our steel ramrod worm has two tines. The female thread is made to fit the Davide Pedersoli Brown Bess Second Model Musket ramrod with metric threads. The female thread is a 5-.8 mm metric thread, which is nearly identical to our standard 10-32 thread. Used primarily to pull patches, wads, and cards, this worm is ideal for use on guns with .50 calib
|
|
Ramrod Worm , 10-32 female thread, for cleaning muskets, removing patches, cards, wads, steel, fits military ramrod
Our steel ramrod worm has two tines. The female thread is made to fit the Model 1863 Remington "Zouave" Rifle, Springfield Rifled Musket, Italian made Harper's Ferry 1803 Rifle, Mississippi Rifle, and most other steel ramrods on imported military replica muskets. Used primarily to pull patches, wads, and cards, this worm is ideal for use on guns wi
|