1877 New Model Sharps
No. 1 Creedmoor Long Range Rifle
,
.45-90 Sharps, 34" Rigby flat barrel,
checkered walnut, fitted with 9A long range tang sight,
used, by Axtell Rifle Co.
Part Number: AAS-418
Availability: In Stock
Price: $4,999.00
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Must be delivered to a Minnesota resident, or a Federal Firearms Licensed dealer in any other state.
A signed copy of your dealer's FFL license is required before shipment.
This Sharps New Model 1877 No. 1 Creedmoor Long Range Rifle is best quality. It was manufactured by the now retired Axtell Rifle Company, Sheridan, Montana. It is a very close copy of the original Creedmoor rifle and was sometimes called the English Model Sharps. This Model 1877 rifle weighs 10.4 pounds and has a 14" trigger reach.

The 34" barrel is tapered round, with fancy Rigby flats polished and rust blued. Chambered in caliber .45-90 Sharps and rifled with a twist of 1 turn in 20 inches, the bore is mirror bright. The front sight is the Axtell - Riflesmith's No. 16 copy of the original Sharps wind gauge front sight, with spirit level and single aperture insert fitted in the sight. The tang is fitted with the base for the Axtell - Riflesmith No. 9 copy of the long range Sharps Vernier tang sight, the No. 9 staff is missing on this rifle. The buttstock has the Axtell - Riflesmith No. 9A copy of the long range Sharps Vernier tang sight mounted to the heel of the buttstock. The graduated Vernier scale has nearly three (3) inches elevation, to allow shooting at 1,000 yards and more. Each elevation mark is .050", divided into five increments of .010" using the Vernier feature. Thus, each Vernier mark is about one (1) minute of angle (1" at 100 yards), a very convenient feature for the serious match shooter. NOTE: Although the 9A staff will fit into the No. 9 base. The notch on the staff of the 9A sight will not lock into the base for the 9 sight at the correct angle, due to the notch position on the bottom of the staff.

Stocked in a very nicely figured piece of walnut with a checkered pistol grip, forearm, and finished to a satin sheen. Metal to wood fit is excellent and this rifle has been well maintained with only a few small handling marks. The buttplate is a hard rubber with the Axtell crest marking. Our top view shows the tapered comb of the 1877 Sharps buttstock with the tang sight mounted at the heel. The bone and charcoal color case hardened action, and rust blued barrel. Notice that the Rigby flat on the round barrel, where it joins the action, an English style detail. The rounded toe of this 1877 buttstock tapers to the pistol grip. The pistol grip is inlaid with an ebony wedge inlay. Architectural details include the semi-circular flat on the walnut forend, in front of the action. The rounded forend cap is ebony, another common English feature.

Beautifully color case hardened, using the bone and charcoal process, in subtle shades of blues, purples, gray, with faint yellow undertones, this slender back action lock is very attractive and retains all of its spectacular color. The 1877 Sharps lock is smooth and crisp, with a reliable half-cock safety notch positioned just above the firing pin. Made for Creedmoor Match competition, no set trigger is allowed. The single trigger is well tuned to allow a smooth release. The trigger face is checkered, for a positive touch.

This rifle qualifies for FFL transfer and can be picked up by a Minnesota resident, or it must be shipped to a FFL dealer in another state. This used 1877 Sharps rifle has only the long range staff for shooting from supine position. This rifle will require load development, and fine tuning, for serious target competition. We enjoy casting bullets, hand loading black powder cartridges, and enjoyable afternoons at our local 100, 200, 400, and 600 yard range. If you enjoy shooting, recording results, and creating loads, order this rifle, today. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready for same day shipment on receipt of your funds, and your Federal Firearms Licensed dealer's signed FFL copy. We must deliver to a Minnesota resident, or to a licensed dealer in any other state.

Search for a FFL Transfer Dealer in your area.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

SPG Black Powder Cartridge Reloading Primer,
revised 9th edition, 20 plus new pages
by Mike Venturino & Steve Garbe
SPG Black Powder Cartridge Reloading Primer, revised 9th edition, 20 plus new pages by Mike Venturino & Steve Garbe
Part Number: BOOK-SPG
Availability: In Stock
Price: $24.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Part Number: BORE-MOP-45-10
Availability: In Stock
Price: $3.19
Order Quantity:
Bore brush, bronze, for .45 caliber, 10-32 thread
Bore brush, bronze, for .45 caliber, 10-32 thread
Part Number: BRUSH-45-10
Availability: In Stock
Price: $2.99
Order Quantity:
Cartridge Case,
.45-90 Winchester,
unprimed brass,
correct head stamp,
2.4", by Starline,
100 pieces
Cartridge Case, .45-90 Winchester, unprimed brass, correct head stamp, 2.4", by Starline, 100 pieces
Part Number: CASE-45-90-PACK-100
Availability: Out of Stock, request notification when available.
Price: $97.00
Special Restrictions Apply
Not available for export outside the U.S.A.
  
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands. SOLD OUT until 2022
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands. SOLD OUT until 2022
Part Number: GOEX-FFG
Availability: Item is currently sold out.
Price: $26.92
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
  
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands. SOLD OUT until 2022
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands. SOLD OUT until 2022
Part Number: GOEX-FG
Availability: Item is currently sold out.
Price: $26.92
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
  
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Part Number: JS-45-6-8
Availability: In Stock
Price: $4.59
Order Quantity:
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
Part Number: LEE-90268
Availability: Out of Stock, request notification when available.
Price: $31.99
  
Lee Bullet Mold .45-70 caliber, .457" diameter, 340 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 340 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90373
Availability: Out of Stock, request notification when available.
Price: $24.99
  
Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90374
Availability: Out of Stock, request notification when available.
Price: $24.99
  
Lee Bullet Mold .45-70 caliber, .457" diameter, 450 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 450 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90375
Availability: Out of Stock, request notification when available.
Price: $24.99
  
Lee Bullet Mold .45-70 caliber, .457" diameter, 500 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 500 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90376
Availability: Out of Stock, request notification when available.
Price: $24.99
  
Lee Liquid Alox, 4 oz. bottle
Lee Liquid Alox, 4 oz. bottle
Part Number: LEE-ALOX
Availability: In Stock
Price: $5.99
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Only ground shipping to a physical street address in the continental 48 states. Can not be shipped to a P.O. Box.
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Part Number: LEE-SHELL-08
Availability: In Stock
Price: $4.99
Order Quantity:
SPG Bullet Lubricant,
one 1-1/4 ounce stick, for Black or Smokeless Powder
SPG Bullet Lubricant, one 1-1/4 ounce stick, for Black or Smokeless Powder
Part Number: LUBE-SPG
Availability: In Stock
Price: $4.49
Order Quantity:
Bullet Mold,
.457" diameter, 385 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 385 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-124
Availability: Out of Stock, request notification when available.
Price: $87.99
  
Bullet Mold,
.457" diameter, 500 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 500 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-125
Availability: Out of Stock, request notification when available.
Price: $87.99
  
Bullet Mold,
.457" diameter, 535 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 535 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-132
Availability: Out of Stock, request notification when available.
Price: $87.99
  
Case Lube,
2 oz. bottle, by Lyman
Case Lube, 2 oz. bottle, by Lyman
Part Number: LYMAN-CASE-LUBE
Availability: In Stock
Price: $6.99
Order Quantity:
Case Lube Pad,
by Lyman
Case Lube Pad, by Lyman
Part Number: LYMAN-CASE-PAD
Availability: In Stock
Price: $9.99
Order Quantity:
Lyman Classic Die Sets,
for .45-90 Winchester caliber
Lyman Classic Die Sets, for .45-90 Winchester caliber
Part Number: LYMAN-DIE-45-90
Availability: Out of Stock, request notification when available.
Price: $69.99
  
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $47.99
Order Quantity:
.459" Sizing & Lube die,
by Lyman
.459" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-459
Availability: In Stock
Price: $34.99
Order Quantity:
Shell holder #17,
by Lyman,
fits .40-65 & .45-70 to .45-120
Shell holder #17, by Lyman, fits .40-65 & .45-70 to .45-120
Part Number: LYMAN-SHELL-17
Availability: In Stock
Price: $8.99
Order Quantity:
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Part Number: OX-CLEAN-45C
Availability: In Stock
Price: $3.29
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2021Track of the Wolf, Inc.
Accepted Credit Cards