Hawken Rifle,
.54 caliber 33" Douglas barrel,
percussion, iron trim, curly maple,
new, unfired, by George Nelson
Part Number: AAS-778
Availability: In Stock
Price: $2,699.00
Order Quantity:
Stocked in maple, this classic percussion halfstock Hawken rifle is trimmed with traditional iron furniture. The 33" barrel and iron trim are rust browned, to an attractive deep brown finish which helps to eliminate reflections, glare, and mirage while sighting. A classic Hawken hooked breech and two wedge keys retain the straight octagon barrel, allowing take-down for easy cleaning. This rifle was assembled by contemporary builder George Nelson, and is signed on the top flat of the barrel. Trigger reach is 14", to fit todays average shooter. This rifle weighs 8.9 pounds and balances just behind the ramrod entry pipe.

The .54 caliber straight octagon Douglas barrel is a handy 33" from the muzzle to the breech. The barrel is a sturdy 1" octagon across the flats. G. R. Douglas discontinued muzzle loading barrels to decades ago to concentrate on barrels for modern cartridge rifles. Douglas muzzle loading rifle barrels were well known for quality and still sought after by gun makers and shooters. The barrel is cut rifled with 8 grooves with a slow twist for a patched round ball. Internally the bore is bright and clean, ready to shoot. We recommend our, #BALL-530, .530" round balls, #OX-18-50-D, .018" Ox-Yoke ticking patches, and pure #MINK-OIL patch grease for accurate shooting. Located 7-1/2" forward of the breech a semi-buckhorn rear sight is dovetailed into the barrel. It is matched at the muzzle by a silver blade front sight that is set in a copper base behind the muzzle. The top flat of the barrel is engraved G. B. Nelson.

The curly maple stock is stained to a dark brown then rubbed back to a golden undertone to best display the figure. The smooth chocolate brown finish of the barrel, lock, and iron furniture is well done. The buttplate is tall with a modest curve to engage the shooter's shoulder. The long tang of the hooked breech strengthens the wrist. The polished and blued tang bolts are neatly fitted with the slots aligned. The hooked breech allows the barrel to be easily dismounted for cleaning without risk of wetting the stock with water containing black powder residue.

To dismount the barrel, put the lock on half cock, withdraw the ramrod, drift the captured keys past the underlugs, and the barrel can be lifted from the barrel channel for ease of cleaning. The keys are captured to the stock to prevent loss. Remove the nipple and place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by a oily patch. Dry and oil the exterior then reassemble the rifle.

Sweeping down from the hooked breech, the long tang of the rifle is matched below by the long triggerplate, the two sandwich the wood of the wrist between them and strengthen that portion of the stock. All the screws slots are neatly aligned along the tang and buttplate. The iron toeplate protects that delicate area of the stock when it is in contact with the ground during loading and cleaning. The long plate adds extra strength to the stock that, historically, made these rifles so popular on the Great Plains and in the Rocky Mountains. Well forward the ramrod is retained by two forward pipes that are soldered to the barrel under rib and one entry pipe. The entry pipe sits just below a poured pewter forend cap, polished to a satin gray finish. The lock panels are nicely shaped with a slender appearance. The single lock bolt and tear drop escutcheon around it are classic features of a halfstock Hawken plains rifle, from the 1835 - 1845 era. Note the beaver tail shaped cheek piece that adds comfort for a right hand shooter, while aiming this .58 caliber rifle.

The Jim Bridger percussion Hawken lock has been finished to a dark brown. This mid-19th century styled lock has a strong mainspring, stirrup link, and fly detent, all nice internal features. The front upper edge of the lock plate has been neatly shaped to blend into lock panels. The R.E. Davis double lever double set triggers are tuned to fire the lock set, or unset. The lock and triggers may be cocked or set in any sequence.

This Hawken Plains rifle with maple stock, iron furniture, percussion lock and double set triggers is neatly fitted and finished. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.530" round balls, pure lead, Hornady, per 100
.530" round balls, pure lead, Hornady, per 100
Part Number: BALL-530
Availability: In Stock
Price: $15.29
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .54 caliber brass collar, 8-32 thread
Ball puller, steel screw, .54 caliber brass collar, 8-32 thread
Part Number: BP-54-8
Availability: In Stock
Price: $3.75
Order Quantity:
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $10.99
Order Quantity:
Powder Flask,
brass body, brass dispensing valve,
embossed Diamond or Basket Weave pattern
accepts 10-1mm threaded spouts
Powder Flask, brass body, brass dispensing valve, embossed Diamond or Basket Weave pattern accepts 10-1mm threaded spouts
Part Number: FLASK-DIAMOND
Availability: Out of Stock, request notification when available.
Price: $44.99
  
Fouling Scraper, flat face, brass, .54 caliber, 8-32 thread
Fouling Scraper, flat face, brass, .54 caliber, 8-32 thread
Part Number: FS-54-8
Availability: In Stock
Price: $3.79
Order Quantity:
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 8-32 thread
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 8-32 thread
Part Number: JS-54-7-8
Availability: In Stock
Price: $4.25
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Part Number: OX-18-50-D
Availability: In Stock
Price: $3.59
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Part Number: RAMROD-6-8-B
Availability: In Stock
Price: $15.99
Order Quantity:
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Part Number: ST-8
Availability: In Stock
Price: $6.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Part Number: WORM-CORK-8
Availability: In Stock
Price: $6.59
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2020Track of the Wolf, Inc.
Accepted Credit Cards